Re: The '67 Burb Build Thread
 

Nice work!

Re: The '67 Burb Build Thread
 

That thing is look'n sick.:metal: I like that smooth bumper.

Re: The '67 Burb Build Thread
 

haha yah he owed me so thats why it got done. other wise it wouldn't have got done for quite a while, the only thing is, i had to take it to his place to do it.... which was fine with me cause there isn't any room in my garage to do it :)

Re: The '67 Burb Build Thread
 

thanks, i try :)


thanks, yah it still isn't finished though, not gonna finish it until i get a few other things done first, which will be a while :(




also, i finally fixed my exhaust hanger problem on both sides the correct way, should be a lot better than the cheap a$$ metal strap kit i was using before....:devil:
Attachment 814950

Re: The '67 Burb Build Thread
 

picked up my free spare 68 hood yesterday that i will eventually chop up and make a cowl hood scoop out of, and then i will eventually attach it to my hood current 67 hood :devil:

Re: The '67 Burb Build Thread
 

well here is the hood i picked up, needs some more hammer and dolley work but its getting to the point its straight enough to cut up :lol: :devil:
Attachment 821660

Re: The '67 Burb Build Thread
 

Oh no whatca gonna cut up that sweet hood for? :lol::metal:

Re: The '67 Burb Build Thread
 

i think you already know ;) , and if it doesnt turn out oh well it was free anyways haha. but if that is the case i will buy a pre-made steel cowl scoop and weld it to my current hood :D

Re: The '67 Burb Build Thread
 

hood should be sweet !!!!!!! good work !!!

Re: The '67 Burb Build Thread
 

thanks, i actually got the idea of cutting up another hood to make a scoop from jays68yak

Re: The '67 Burb Build Thread
 

well my accel coil took a dump, so i replaced it with a stock one i got for free from a buddy since i dont have the cash for a good aftermarket one right now. and since i dont have the stock cover to go along with it, and i like the look of the accel one better, i decided to paint it red instead of leaving it grey.... think i like it alot better red :lol:
Attachment 825663

crap..... now i need to either replace, or paint my faded red distributor cap red again or black, hmmmm decisions decisions. :smoke:
Attachment 825664

and in its hiding spot out of the elements :)
Attachment 825665

Re: The '67 Burb Build Thread
 

got the hood masked off for where i need to cut it up
Attachment 827576

first piece removed
Attachment 827577

and another
Attachment 827578

and what's left after the third piece was cut out
Attachment 827579

the beginning of mock up....
Attachment 827580

Re: The '67 Burb Build Thread
 

standing back to get a first look at those two pieces
Attachment 827584

third piece added in
Attachment 827583

side view of hood slope to make sure its gonna look right
Attachment 827585

need to cut the center piece to make it shorter so it will match the two side pieces
Attachment 827586

standing back to get an overall look to see if i like it.... which i do :devil: . now i need to attempt to tack it together for now with my crappy flux core welder, so that i can do some more cutting and fitting on it, then i will most likely wait to finish it until i get a better welder :)
Attachment 827587

Re: The '67 Burb Build Thread
 

Man that is looking awesome. Gonna be mean. I dig it. Nice work
Posted via Mobile Device
Posted via Mobile Device

Re: The '67 Burb Build Thread
 

nice...i think thats gonna good on there

and its not your typical off the shelf hood scoop...

Re: The '67 Burb Build Thread
 

yah i was thinking of one of those 5" tall steel ones lol, but this one was basically free so i will attempt this one first :D

Re: The '67 Burb Build Thread
 

Looking good copy cat :lol: how wide did you end up making it?
Posted via Mobile Device

Re: The '67 Burb Build Thread
 

lol, hey take it as a compliment :) , i took out two 20" section from each side like you did on yours ;)

Re: The '67 Burb Build Thread
 

all tacked together
Attachment 828101

center piece cut down and tacked in
Attachment 828102

a rear side view
Attachment 828104

will be just about 4" tall when its done
Attachment 828105

another overall view standing back looking at it :smoke: :chevy:
Attachment 828103


edit: oh! this used to be a 50th hood at one time in its life :D

Re: The '67 Burb Build Thread
 

inside drivers view
Attachment 828107

inside view from center of seat
Attachment 828106

Re: The '67 Burb Build Thread
 

Hey I just wanted to give you a hard time. :metal:

I was at the good guys show yesterday, staring at the c/10 club trucks. And my buddy was like you know what your truck has that those dont...that hood. I cant wait to take it to its first show now. Too bad that wont be for a long time. lol

Re: The '67 Burb Build Thread
 

That scoop is going to be a really cool and unique addition to your already sweet suburban.
Posted via Mobile Device

Re: The '67 Burb Build Thread
 

looks like you're pretty good with that flux core! Looks sweet!

Re: The '67 Burb Build Thread
 

its ok lol :) yah mine wont be done for a while as well, and same with the show thing :( but thats ok because i will be working and buying parts for it :)

Re: The '67 Burb Build Thread
 

thanks :D , but i got the idea from jays68yak