Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
and the second pass is with lap sandpaper discs (I never use grind stones, they suck)
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and that gives us this
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
which we make shinny for some JB Welding...
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
tacking like a Boss !
|
Re: My Dusty 71 GMCe Electruck
Those mounts look like they will work good!
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
transferrin' dem holes!
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
and time for the eyecrometer test
|
Re: My Dusty 71 GMCe Electruck
Good looking mount! Looks factory
|
Re: My Dusty 71 GMCe Electruck
Always leave us hanging, waiting for what's next. Nice work on the rounded corners.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
5 Attachment(s)
I seriously found this metal piece sitting at a side of a dumpster a few years back, that's the quality of parts we are dealing with here people
|
Re: My Dusty 71 GMCe Electruck
What, no bed frames? That looks like real steel!
Should hole the weight and torque very well. |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so this is what we are going for at the ends, sort of a clam shell design
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
here is what one side will look like, still needs some trimming, nipping, and tucking but you git the idear
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and the mandatory stare and compare from 5 feet back, whilst sippin on a cold one, [noddin' yer head, like yeah I made that]
|
Re: My Dusty 71 GMCe Electruck
Coolski!
|
Re: My Dusty 71 GMCe Electruck
just a suggestion. the way that you have the ears of the mount, up and down, will make for difficult removal in the future. if you turn the mounts on the frame 90 degrees, facing front to back, you will be able to remove the mount. FYI, love what you are doing and I get most all of the Vice Grip Garage type slang you use.
keep up the good work. following along for the craftsman ship you are putting it to it. |
Re: My Dusty 71 GMCe Electruck
I'm totally enjoying your build!
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
Quote:
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
Quote:
here's me doing the wax on wax off for what I hoped to be the 900th and final, (and I mean it this time) final time before a weldin' |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
layin' down them dimes, [well, and nickels, some pennies, but mostly dimes...]
and it's totally straight if you turn your head to the side a little bit... ok, a little bit more |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
you know what they say: "Grinder 'n Paint make me the welder I aint!"
seriously though, the back side had to be ground flat to mate with the trans bell housing plate, feel me? the front was ground to hide the crappy welds! |
All times are GMT -4. The time now is 06:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com