![]() |
Re: Loadmaster '47 COE
It just gave the view of "new and old"
When I was growing up we didn't have suburbans, we had Chevy Caryall's!! |
Re: Loadmaster '47 COE
Cant wait to see that Burb build.
85K is very impressive. |
Re: Loadmaster '47 COE
congrats on the miles, the award and the burb. Thats still my dream build for the family. Bed sides look great.
|
Re: Loadmaster '47 COE
It's a great feeling to win and get your truck on a t-shirt anyone can buy. 85000 is impressive for even a manufactured vehicle, nice job. Burb looks nice, but I really want to see that camper when it is done.
|
Re: Loadmaster '47 COE
cant wait to see the burb!
|
Re: Loadmaster '47 COE
3 Attachment(s)
A little more progress on the Turtle Shell: I got most of the ceiling panels in today. I trimmed the edges with 1" aluminum flat bar. I still need to remove the Cleckos and install rivets and replace 1 light which I accidentally pulled the wire from but good progress just the same.
Rob |
Re: Loadmaster '47 COE
Rob, the camper is looking very nice! That's great to hear you can haul all that weight with those bags too. My commute to work is 30 miles one way too. I'm glad I'm not the only one racking miles up. Haha Nice score on the burb! Those are hard to find. Sorry to hear the Cobra is going. I can relate though. I have thought about selling my vette to fund another project or two as well.
|
Re: Loadmaster '47 COE
1 Attachment(s)
A little more progress today. Set the rivets for the trim work and built one of two bed frames. Still needs paint and I also realized that with the shell in the shop the bed will not fit in the door. Dope lol.
Rob |
Re: Loadmaster '47 COE
2 Attachment(s)
So I got the first of two bed frames complete. I wrapped the exposed sides with left over aluminum from the skin. I also made the top sections hinge for storage inside and added an outlet to the rear section. I was able to install the bed through the engine access hole. The frame is painted in a hammer tone silver, the rest of the steel trim will painted the same color.
Rob |
Re: Loadmaster '47 COE
Nice workmanship.
Mudman. |
Re: Loadmaster '47 COE
Very well thought out.
|
Re: Loadmaster '47 COE
Quote:
|
Re: Loadmaster '47 COE
5 Attachment(s)
Picked up an LS1 intake the other day, the idea is to remove the hump in the engine cover which will also help with room in the camper. The camper is also starting to come together. Bed frames are built and installed, even refinished a small cabinet my wife picked up at a garage sale to use as a night stand. The bed frames are 30X80 with under bed storage and the frames wrapped in aluminum. I also used the truck in the local Christmas parade, had a good time and 9 kids plus parents on the bed.
Rob |
Re: Loadmaster '47 COE
That's awesome! When swapping to the LS1 intake you may run in to problems with the accessories blocking the throttle body mounting/inlet tube. Just means a little more rearranging for you, lol. Still love this truck every time I see it.
|
Re: Loadmaster '47 COE
There may be some minor stuff. Keep in mind my truck intake is reversed meaning the throttle body is on the transmission side. Not a whole lot of accessories back there.
Rob |
Re: Loadmaster '47 COE
Using your truck in a parade is so cool. I used my Jeep years ago. Great memories. Camper is looking killer.
|
Re: Loadmaster '47 COE
Doh. Disregard that input, lol.
|
Re: Loadmaster '47 COE
2 Attachment(s)
Been playing with the next evolution of my drive train. I will retain the 4.8L for now but will be adding a LS1 intake and some GTO coil covers. The main reason for the change is to lower the overall height on the engine to eliminate the hump on the bed floor. Engine in the photo is a older 5.3 I picked a while back for a builder. I am also thinking of milling off the GTO letters and replacing them with COE in the same font.
Rob |
Re: Loadmaster '47 COE
Luv the idea you have for the engine and the subtle custom word change!
|
Re: Loadmaster '47 COE
love the COE label idea, but since the bed will be over the engine, wont it just be for you?
|
Re: Loadmaster '47 COE
Great idea with the COE. Problem is when you show off your motor hardly anyone will catch it, but when they do...It's the little things.
|
Re: Loadmaster '47 COE
Do you have a manifold to fit the covers?
|
Re: Loadmaster '47 COE
Quote:
|
Re: Loadmaster '47 COE
You are correct joedoh, The GTO covers are designed for a LS6 intake not the LS1. The LS1 covers are for the Corvette and have an odd shaped cut out for the alternator or it may be the PS pump. Either way I liked the more closed look of the GTO ones. Either set will require mods for the reversed intake and wiring changes I made. I will also have to change the fuel line arrangement.
Trust me, nothing has been plug and play on this build. That being said I do enjoy a good challenge. Rob |
Re: Loadmaster '47 COE
4 Attachment(s)
OK, so i finally got around to installing the LS1 intake on the COE. It will take a bit of trimming to make the GTO coil covers fit due the the wiring that was done on the initial install of the truck intake. I could rewire the whole harness to hide it all under the covers but man would that be a lot of work. On the plus side, I now have the clearance to have a flat floor on the truck bed. Mean while, I have been busy installing a Mercuiser 260 HP boat engine in my son in laws C-30. And yes a boat engine will work in a car or truck, assuming it rotates CCW
Rob |
Re: Loadmaster '47 COE
Nice on both accounts! :metal:
|
Re: Loadmaster '47 COE
looks great
|
Re: Loadmaster '47 COE
looks super great!
|
Re: Loadmaster '47 COE
Nice job on the flat floor. I have always been a fan of boat motors. You can run them wide open throttle all day...try that in your truck.
|
Re: Loadmaster '47 COE
Nice work!
|
Re: Loadmaster '47 COE
Rob, It was really nice meeting you this weekend in Myrtle Beach, your truck is AWESOME my wife and I are very impressed. I'm the guy building the 1956 Ford COE with a sleeper and ramp bed. Hope you remember my Chip Foose Drawing. LOL You have us thinking about making a removable camper unit like yours. My ramp bed is 16' long with the last 3' being a dove tail. Whats the length and width of your awesome camper (turtle Shell)?:metal:
Bobby |
Re: Loadmaster '47 COE
Hey Bobby, nice meeting you and your wife also. My bed is 12' long by 78" wide. The camper is 12' by 87" wide by 6' 8 1/2" inches high at it's highest point. I loose 2 1/4" for the floor and base frame and 1 1/4" for the ceiling and frame work. Total inside is around 84 3/4" wide by 11' 10 3/4" long by 6' 5" high. I'm 6' 2" tall and have no issues.
Rob |
Re: Loadmaster '47 COE
5 Attachment(s)
Hi all, been a while since I updated so here goes. I ended up going back to vacuum wipers. I have run 3 aftermarket electric kits and had issues with all three. Basically they strip the gears, the issue may be my right arm seems to over travel at high speed and pulls the gearbox over center causing it to load the drive gear. Anyway the vacuum works fine.
Other news the camper is about finished and is getting a lot of use. Over 94K on the truck now and still no major issues. 1 water pump and 2 electric fan motors. They both had high miles on them to begin with. Got an electric fireplace, a old trash can and a retro style stereo for the camper. I wired quick disconnects for both AC and DC power. The brick piece under the fireplace is removable for engine access. Rob |
Re: Loadmaster '47 COE
the brick around the fireplace is genius! :lol:
on the electric wiper systems, my right side bound up and threw clips until I shortened the arm about an inch. just took it out, cut out an inch, and welded it back up. the instructions tell you to bend the arms but force on a bend limits torque and amplifies the problem. I know you got the vacuum working now but for the next try maybe! |
Re: Loadmaster '47 COE
4 Attachment(s)
More, the windows tilt out but still seal out water very well. Had a sticker made for the rear. Even got a drawing to cover the AC door until I can finish that area. I've had it at a couple of shows now with the camper on and it has been very popular.
Rob |
Re: Loadmaster '47 COE
Cool sticker, and camper looks great with all the changes...Jim
|
Re: Loadmaster '47 COE
beyond awesome
|
Re: Loadmaster '47 COE
Very nice! For some reason, I think a lava lamp is needed somewhere...maybe in the fireplace.
Looked at the Blue Turtle lettering and turtle drawing again. It has a cool 70’s vibe is why I think of a lava lamp. |
Re: Loadmaster '47 COE
Truck and camper looks great!
|
Re: Loadmaster '47 COE
Oh my it looks so good. I love all the little things.
|
All times are GMT -4. The time now is 03:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com