Re: 198Plus build
 

I'm with Stodder I'm full retarded and semi retired.

Re: 198Plus build
 

:haha: :haha:

Re: 198Plus build
 

Since there's nothing going on with my build thought I would share some pic's
of our first total repaint.......More pic's when finished

http://i88.photobucket.com/albums/k1...DSC_0609-1.jpg



I thought it turned out pretty nice even though its a work truck.

http://i88.photobucket.com/albums/k1...1/DSC_0621.jpg

http://i88.photobucket.com/albums/k1...1/DSC_0614.jpg

http://i88.photobucket.com/albums/k1...1/DSC_0613.jpg

Re: 198Plus build
 

When I went to the metal yard I ask for 18 guage so I think it is. I've never measured it.

They got away with it, I guess I can to. :lol:

With a few pop rivets

It was all looking good til I saw the reflection. :haha:;)

Re: 198Plus build
 

Alan has jokes :lol:............Here's you a better shot


http://i88.photobucket.com/albums/k1...1/DSC_0612.jpg

Alan's Classic
It was all looking good til I saw the reflection. :haha:;)

Re: 198Plus build
 

My guys spent some time today with my truck on the frame machine. Just double checking to make sure no more surprises...........Glad they did it needed a little help............For once I got something done and it didn't cost me a dime :lol: Crap.........I forgot I'm the one who pays them :smoke:



http://i88.photobucket.com/albums/k1...1/DSC_0626.jpg

http://i88.photobucket.com/albums/k1...1/DSC_0627.jpg

http://i88.photobucket.com/albums/k1...1/DSC_0632.jpg

http://i88.photobucket.com/albums/k1...1/DSC_0630.jpg

Re: 198Plus build
 

Ronnie looks like those brakes need to be cleaned and greased.

Re: 198Plus build
 

Yea, I know they are pretty aren't they.......

Re: 198Plus build
 

Got the A post gutters removed and the seam sealer removed around the top of the door area so the blaster can do a better job. I'm glad I removed them.

http://i88.photobucket.com/albums/k1...b/DSC03264.jpg

http://i88.photobucket.com/albums/k1...b/DSC03262.jpg

http://i88.photobucket.com/albums/k1...b/DSC03265.jpg

I told Ronnie the brass in this joint is not factory. To my knowledge they didn't use brass back then. Y'all correct me if I'm wrong. I told him the shop that did the floor work could have done it. What do you wnat to do with this Ronnie? It could open a can of worms?


http://i88.photobucket.com/albums/k1...b/DSC03266.jpg

Re: 198Plus build
 

Mine looked like that too. I'm leaving them off for that clean shaved look.

Re: 198Plus build
 

What a wasted day today. Some how the info of what was needing blasted and the condition of the parts didn't get to the worker. Long story short is the cab got 1/3 blasted and that was it. Due to the fact that he didn't bring enough media with him. I'm aggrevated due to the fact that nothing got accomplished and today was a great day to work out in the shop. That's what happens when I'm not in charge of the situation. I'll get off the soap box now. Here is what got done and what was found so far.

http://i88.photobucket.com/albums/k1...b/DSC03281.jpg

http://i88.photobucket.com/albums/k1...b/DSC03276.jpg

http://i88.photobucket.com/albums/k1...b/DSC03275.jpg

http://i88.photobucket.com/albums/k1...b/DSC03284.jpg

Looking at the brass on the rt side of the dash

http://i88.photobucket.com/albums/k1...b/DSC03285.jpg

http://i88.photobucket.com/albums/k1...b/DSC03282.jpg

More brass, it was scattered around in different locations.

http://i88.photobucket.com/albums/k1...b/DSC03283.jpg

Found more floor patch work just to the inside of the inner rocker.

http://i88.photobucket.com/albums/k1...b/DSC03277.jpg

Supplies the guy brought with him, just for the record.

http://i88.photobucket.com/albums/k1...b/DSC03290.jpg

The parts he brought so far for the record. The inner rockers was not what I ordered. I specified the complete inners. What's here 2 outer and 2 inner rockers, 2 kick panels, 1 cab corner, 2 A post dog legs.

http://i88.photobucket.com/albums/k1...b/DSC03288.jpg

Re: 198Plus build
 

Sorry to hear of the non-productive day Alan. I hate it when people don't come prepared to do the entire job. What type of media was he using?

Re: 198Plus build
 

Re: 198Plus build
 

was he using a soda blaster or a sand blaster spraying it. And also how does that epoxy primer compare to others like DP90

Re: 198Plus build
 

I can't say for sure, but I think it was a soda machine. I also can't say anything about the epoxy primer in the pic. It came from Ronnie's paint supplier. I don't have any experience with this product, and have never heard of it.
Posted via Mobile Device

Re: 198Plus build
 

Thanks for nothing Alan. HAHA JK

Ronnie I sent you a PM last week about some guy wanting some of your parts on the other forum. Just wondering if you got it.

Re: 198Plus build
 

I'm sure you're aware of this Alan, but for the others reading this. It would be a good ides to contact the manufacturer of the epoxy primer to see if they will approve their produst for application over a soda blasted surface. Several paint companies will not guarantee their product when applied to a soda blasted surface. PPG is one of them.

Re: 198Plus build
 

You didn't want me to lie now did you? ;)

Your right Capt. This epoxy can't be used on soda blasted parts unless it is cleaned and neutralized. Ronnie is picking the cab up soon to get it sand blasted.

I need item 6 in this pic. I got a plain inner rocker patch pictured below. I'm sure you can find it cheaper, just using this pic as a referrence.

http://www.lmctruck.com/icatalog/cbe/750w/0016.jpg

This is what the wrong part looks like on the truck.

Re: 198Plus build
 

http://www.truckandcarshop.com/6072.html actual page nbr 69
pt # 60-094121 & 22 @ $57.00 ea.
they do look much superior to the old setup
ron

Re: 198Plus build
 

You might try one of our new vendors here on the forum, topbananaparts.com I just received an order of patch panels from them today. They are Key Parts brand and upon initial inspection they look good. Top banana has some of the patch panels for the '60-'66's on sale right now too.

Re: 198Plus build
 

Thanks guys. But I think we have discovered a big problem. Read on...........

Ronnie all along didn't believe this was his cab and upon further inspection he might be right. When he had his cab in the first shop that swapped his doors might have swapped cabs as well and swapped the VIN plates. His VIN plate doesn't have the rossett rivets.

The first pic is his. The second pic is my cab and the third pic is the cab I have behind the shop. What's y'alls thoughts.

The last pics is the stuff that came off my roof when we had our first rain since the blasting got done.

Re: 198Plus build
 

I agree that the rivets look like they are not factory, but I also cant compare mine because i have removed my plate to make a repair.

One other comment here is that if they did remove that plate they did a heck of a job as when I was taking mine off it did not come off all that easy and has some marks where the rivets spun so in thinking about that I think you would see some marks from it being removed no matter how careful you were in taking it off

Just a thought

Re: 198Plus build
 

The blasting may have hidden any marks. I would say it has been removed. The question is when? I assume Ronnie does not have any photos of the VIN before he had any work done? It is unfortunate if someone did swap a cab on him. :devil: I hate when people are taken advantage of. Why can't people just be honest? At least we know the cab is in good hands now.

Alan, I always admire how you put everything out there for people to see. That is how my father built his business, and was how I was raised. Everybody may not always like the truth, but at least they can make a decision with all the information.

Re: 198Plus build
 

In the third pic the cab still looks painted? But the vin plate is nice and clean, but a little bent up like they did indeed remove it. The more I read about this thread/ build the more like a damn soap opera it becomes ( anything that can go wrong has/will go wrong) sorry to read the latest, hopefully you guys can get it all fixed and enjoy this truck.
Posted via Mobile Device

Re: 198Plus build
 

Yes it does appear that the VIN tag has been removed at one time. Although that doesn't necessarily mean that the cab was swapped.

Man that is some nasty looking stuff coming off your roof Alan.

Re: 198Plus build
 

Well, it looks like this build has come to an end. Ronnie came over last night and picked his cab up. Due to the recent discoveries with the cab, Ronnie is pretty sure the cab got swapped. He remembers the condition of it when his dad still owned it. Ronnie said the truck didn't have much cancer due to being parked under a shed when his grandfather owned it. I feel sorry for Ronnie, if the cab did indeed get swapped.

Re: 198Plus build
 

What a total bummer Id sure like to see ronnie get it together though right cab or not..

Re: 198Plus build
 

that is not good. is there no way for recourse, or has he just given up. It seems as if it wasn't for bad luck Ronnie wouldn't have any luck at all
Perhaps time for Guido to give those fellows a vist
ron

Re: 198Plus build
 

JMHO, I think at this point and after all the work that has gone into it I would just keep moving forward as long as the VIN is matching to your title and frame.

I agree with the others I sure would like to see him finish this one it will have some good stories behind it once it is finished.

Re: 198Plus build
 

Ronnie needs to come out here and look for another cab, or look on E-Bay. He can be on vacation and do some shopping. There's deals around. I'll keep my eye out. Next June I'm trailering my bike to Kansas on my car trailer. I'll have room for a cab if Ronnie finds one out here. He can meet me. Better than going all the way to So Cal. :metal:

Re: 198Plus build
 

Next June..............With my luck I want make it that long, I already have one foot in the grave and another one on a banana peel......Lmao

Thanks for the offer anyway ;)

Re: 198Plus build
 

I just want to thank you Alan for all you have done for me........

One thing I did gain from all my bad experiences with this truck is priceless.....

A new friend, again thanks Alan ;)

Re: 198Plus build
 

Awh, I now pronounce you both "Friends" But then again aren't we all. :ennyd:

Re: 198Plus build
 

You been drinking again? J/K I'm with you on the friend part. Wish I was closer to your new shop. You might have to run me off.

Amen Brother

Re: 198Plus build
 

A few things I have going on in the shop.



69 Trans Am Clone we are doing a complete Restoration on....

http://i88.photobucket.com/albums/k1..._6736419_n.jpg

http://i88.photobucket.com/albums/k1...1_388404_n.jpg

http://i88.photobucket.com/albums/k1..._4790465_n.jpg

http://i88.photobucket.com/albums/k1..._4761312_n.jpg

1971 Mustang Convertible

http://i88.photobucket.com/albums/k1..._7014382_n.jpg

My 1965 Chevy Truck

http://i88.photobucket.com/albums/k1..._1987390_n.jpg

Re: 198Plus build
 

It's good to see your shop is busy. And also to see that you haven't totally given up on your '65.

Re: 198Plus build
 

But are you making MONEY? Most body shops want to do just Insurance Jobs. Because there isn't any money in restoring older cars. That's one of the reasons I'm keeping busy.

Re: 198Plus build
 

I'm still debating on my truck......



I'm at least paying the bills and just trying to figure this new business out.

Re: 198Plus build
 

Paying the bills is good. Go after those insurance adjusters. They might send you work if they like your work. But remember your always under there thumb.

Re: 198Plus build
 

Sorta sounds like my wife :lol: