Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Cobry (Phil's son)said there would be a BIG hole for dirt and stuff to get into... i talked to him for awhile and he pretty much talked me out of them! i dont get it...

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

no, what happened with yours?? this had me stressed out!!! i gotcha... read my mind!:lol: also a side note, the trans pan is perfectly level too. 1 thing though... the tranny is off from side to side right at an 1/8th inch... really close. i might loosen the motor and see if i can move it over a little. my ocd gets the best of me sometimes

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Here is a post by PCMcobra on his build thread that he had to cut the dumbo ears off the tranny. his pics are a little better than the ones i sent you

pcmcobras S&P headers on a lq4

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

thanks Cherub! i'll call him back today and just tell him to shipp'em:D

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Looking good man!

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

You are really moving right along. It is going to be AWESOME...absolutely something to be proud of!!!

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

I'm diggin that color!!! Looks freaking sweet! :metal:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

I looked through this entire thread and read everything, I love what you have done so far and I think this truck will be amazing once you have it finished! Keep up the amazing work :) really love it!

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

subscribed

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

damn it its looking good dennis im going to have to go by again and check out all the progress.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

^:lol:^ Make sure you get home before Amy to grab those headers.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

The color looks really nice Denice ur truck is almost ready it seems that i relocating my fuel pump same place as yours mine is little upfront and kind of close to the exhaust. I love how your truck is coming up looks so good man keep it up.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

well i finally recieved summits high psi twist tite hose that has been back ordered for over a month. so of course i couldnt wait to start on the fuel system! here's a few pics of it almost done. and some pics of the inner fender and undercoating!!:D

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

more

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

fuel system

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

1 more...

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

what do i put on the middle vent tube on the sending unit? anybody have a pic of what they used?

today i'm going to take a ride out to pick n pull in search of a passengerside inner fender, wire harness out of an '87 for the switching valve and tanks, and take a look at some modern leather bucket seats at Rancho. i also recieved te extended floor pan from captkaos and it wasnt what i had expected... he's going to send me the reg. sized one so i can cut out the brace the goes to the rocker and extend mine. good times:metal:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

I had thought about using a couple of one-way vents that I had bought for my 68, but I couldn't find them at the time, so I just capped them off. I haven't had any problems so far.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

right on! thanks Bob... that was fast!!:lol:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Looks nice Dennis!!!
Coming right along.
That color is very nice also.

What is the Story on the twist tite hose?
How does it work?

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

that kinda looks like EFI fuel line with high preasure clamps.. is that the Summit stuff?

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

thats it guys. summit has something called twist-tite hoses and fittings. its rated at something crazy like 250psi. you dont need the fittings they sell just the clamps for fuel injection. the hose is pretty cheap but it was on back order for over a month.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

I was thinking of using this

http://cgi.ebay.com/ebaymotors/Moros...item5ad7d5d008

or this:

http://cgi.ebay.com/ebaymotors/GAS-T...item35a7059b88

although Bob's option is cheaper.......:lol:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

i like that 2nd option rongstad. they look nice! i might order 4 of them... 1 for each tank, 1 for the rearend, and 1 for the tranny

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

good idea..:metal:...forgot about the rearend & tranny

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Dennis, looks good. How close are you to firing it? If I lived out there I'd tag along to the pick a part seeing as I am off work all this week. ;)

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

:lol: thanks Gerald! jump on a plane and i'll see ya in a few hours!:D

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Dennis - that 2nd option is what I sent you in my PM just a bit ago. They aren't necessary, but sure won't hurt to run them.

As for the Twist Tite hose, you can use it with regular FI hose clamps for connections to the sending unit, switch valve, etc. They also have their own AN fittings for them that do not require clamps. Just push in the fitting and it is done! This is what I used initially for my fuel system. I just placed an order with Summit for SS braided line to replace that long piece I ran from the filter to the fuel rail. I am also going to reroute the trans cooler lines so I can get the AC compressor installed!

Twist Tite fitting:

http://static.summitracing.com/globa...m-220713_w.jpg

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

What was that, you bought Bob & I tickets? When is the flight?
















:lol: ya, right. That would be a fun way to kill this week off. Too bad.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Progress is looking good Dennis. Those inner fenders look amazing. Was Amy upset that you made her sleep on the couch that night? :lol:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

HAHAH sleep on the couch. Man when i went to dennis's house he had a room just for his parts lucky guy ahaha. A dennis is the line-x for your inner fenders as well i know you wanted the bottom of the cab done this way. also color looks damn good.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

:lol:

man, my buddy showed me some special undercoating they use at his shop and i was amazed! i had him do the underside of the inner fenders and i'm going to have him do the underside of the cab with it also. the stuff is really nice!

i picked up some parts today at pick n pull today! i found a CLEAN passengerside inner fender, the chrome trim on the lower part of the '79 grille, and i got the wire harness out of an '87 for the fuel sending units and switching valve:D i'll post up a few pics in a bit.

oh yea also picked up the radiator cover piece that bolts to the core support! looks beautiful!!! he also undercoated the bottom of that too!

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

here's the pics! forgot to add i also ordered 4 of the vent valves. thanks Rongstad and Bob for the links! also ordered the s&p headers again today. Cobry said they would ship TODAY!!!:metal:

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

couple more...

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

whats the name of the undercoating?? damn paint looks good man. which pick n pull did you hit??

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Dennis: Love that color it's going to look great. Post the name of the undercoating.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Everything is looking really good my friend. That color is amazing in the light. I cant wait to see the truck all finished up with that paint and the 20 inch Coys! Very nice progress.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

How long is that piece? do you know how many pieces, if more than one, to the switch on the dash?

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

Dennis,
You are making some serious progress on your engine install! It's always amazing how fast things go with the ducks in line. Wish I was this disciplined about our builds.

Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado)
 

its 3 pieces. 1 to the sending units and switching valve. then 4 wires from there go along the frame rail to the firewall plug.(3 go the the plug and the 4th goes into the fuseblock. then the piece thats under the dash to the switch. (4wires)