Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

yes sold my house and we are moving into a rent house and looking for a house with a shop or land ??

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Ahh the joys of a double-move! We did the same thing about 4 years back. Problem was that our land-lord needed to move his son into our rental so he gave us the boot! We were rushed into buying the place we did and are now regretting that. There's another move on my horizon :(
Good luck man!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL...that sounds like my luck !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

You need a bigger hammer

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I May have missed it, but do you have any special plans for the hard top ?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

There's a lot of head-scratchin goin on there. I'm impressed!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

oh i have one....that was the baby hammer ! LOL
I am getting a smooth (non textured) top for it and it will be painted body color

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

ur kicking butt mike !!!!! looking good !!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

That is intense! A lot of work that will all be worth it in the end! Well done Mike!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Wow, the frame on this thing is FUNKY! almost should have went with a whole custom tubular setup! ;)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks guys !

A big thank you fellow board member BLK65K10 for the pristine dash for Square Peg !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

nice

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Mike
I figured I should say hello here too...
Watching like everyone else...

Mick

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks guys, by the way that isnt rust around the edge just discoloring from using the toruch to cut it out

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks like rust to me!... yep, it's rust! Denial is a terrible thing!!

jk, dash is gonna look sweet, Mike! Nice work on the frame!!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

So you have a move going on too? Gees, that its kind of a distraction, isn't it?

Good luck on all that shizzle! :)

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, there is some light surface rust ! but a very nice dash !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

yes a move also and going to GG this weekend...trying to iron a few bugs out of Cloud 9, i had a Spal fan controller that i couldnt get to work right finally took it totally off today and put in a simple Hayden controller it is working great !of course to replace that i have to take off a wheel remove the inner fender then the core support panel and then the core support cover.....LOL, what a pain !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

frames looking killer! nice work..... we have a ton houses out here with huge garages:lol:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Time for SLOSH TUBZ to move to AZ ! LOL

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

been there nice place but hotter than the inside of a blast furnace having no aircon there is life treathening

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Yeah, AZ is a miserable SOB in the summer. real demoralizing.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I take it you havent been to Saudi Arabia? LOL

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

You should definitely move out to the west, Mike!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, it would be fun but i really like Arkansas !

Thanks to Ryan Albers i now have a set of Rod Door , door panels for Square Peg ! We will use these and change them up some to make them unique !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

what is that from?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

been at the airport there didnt dared go outside , realy weird place
nice looking airport though

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Those are Rod Doors custome door panels for the 73-87 chevy trucks. Rod Doors closed up shop a couple of years ago, but I think someone was going to continue the door panels but not sure if that happened.

http://www.roddoors.com/

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Correct, Rod Doors

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Holy Moly!!! I just read through page after page - this is like a novel! Let's get this move behind us so Square Peg gets more attention right away! :)
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Roger that !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

We also got to meet Justin from Scott's at the Goodguys show this weekend, had a great time visting with him and seeing all of their top notch products on display !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I like the panels They will look good in the blazer

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Thanks man, they will be modified but it is a great base to start from !

Sorry about the progress delays hopefully by the end of this week we will be completely moved and progress will be back underway on Square Peg !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

There is no such thing as completely moved, you'll be painting rooms and hanging pictures for the next year!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

nope it is worse then that....this is a rental house until we find what we really want to buy...so we are going to have to do this again ! LOL

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Ugh rentals.....
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

never been able to afford a home or wanted the hassles of possible forced selling paying tax and all that stuff
im living in rentalplaces all my life , there some good things about it though , the person renting the place needs to take care of the house on the outside fix leaks all that sort of stuff ..... at least they need to here in the netherlands
downside is that youre usually pay more in rent a month then you would doing a downpayment on a morgage aspecially in the non social housing sector

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Me Too !!!!!

God's Country.

Sometimes I gripe when I see a house with a yard full of too much cr*p (which is any yard that has even more cr*p than my yard does), but when I read the hassles that some of you guys go thru with the local zoning-compliance people, it makes me really appreciate getting to live in "the land of the free....."

I saw a bald eagle soaring overhead today. Not many folks EVER get to see that.

Dave Ellis
Mountain Home, AR

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

YES it is ! Got to do a little work on Square Peg finally on Sunday...and forgot the camera...pictures coming tomorrow ! Working on the Scott's Super Slam 4link ! It is coming out SWEET, cant wait to set the body on !