The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today? Chapter II (https://67-72chevytrucks.com/vboard/showthread.php?t=612422)

beaterku 02-24-2018 06:41 PM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
Made decent progress on the leaf to coil spring conversion today. It back on the ground temporarily. The conversion is complete! I put it on the ground to check driveshaft clearance on the crossmembers. It's clears no problem. I still need to get the truck on the lift to see what is going on with the trans mount. It is sitting off to the drivers side. I broke it all back down to do touchup on the frame paint. I also decided to remove the stock leaf hangers. I ran out of time today, but should be able to work a few nights this week. Also installed the 1310 to 1330 conversion u-joint.

andrewpclayton 02-24-2018 08:32 PM

Re: What did you do to your truck today? Chapter II
 
HEI ignition! Pretty straightforward install

Baker72chevy 02-24-2018 09:52 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Put pulleys an brackets on today clean and painted

stevenfromtexas 02-24-2018 10:05 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 197D_C10 (Post 8195767)
I had some new shoes put on the truck today.


hey brother, is that the 506 medium blue? i love your color!!!

Brofle1402 02-24-2018 10:36 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Worked on my motor swap which is about over.

iriereggaeman 02-25-2018 02:07 PM

Re: What did you do to your truck today? Chapter II
 
4 Attachment(s)
replaced a number of worn steering/suspension parts with high-quality parts from Moog. It really makes a difference in the steering - things are a bit stiff - but hope it'll work it's way out in the next couple week. Aiming for a pothole here and there to help it along. :lol:


Attachment 1756655

Attachment 1756656

Attachment 1756657

Attachment 1756658

71CHEVYSHORTBED402 02-25-2018 09:04 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
I don't like working in the garage with the doors closed, and we finally got some nice weather today, so prepping for blast & powder coat. They say no grease and no grease they get. I probably spent 5 hours cleaning this cross-member.

Put the frame on wheels. I imagine it will high center on and off the auto transport, but at least it's easier to lift this way. Worst case scenario I add a center "axle", but I probably won't.

On a side, I read a shop describing how they spent 2000 hours on a full restoration. I'd like to know how they did that;)

ripper70 02-25-2018 09:43 PM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Installed my battery box,trans cooler,and fuel tank after polishing them. Digging buffing compound out the crack of my ### lol! Also installed back glass:metal:

Metaldoc 02-26-2018 01:20 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 71CHEVYSHORTBED402 (Post 8197426)
I don't like working in the garage with the doors closed, and we finally got some nice weather today, so prepping for blast & powder coat. They say no grease and no grease they get. I probably spent 5 hours cleaning this cross-member.

Put the frame on wheels. I imagine it will high center on and off the auto transport, but at least it's easier to lift this way. Worst case scenario I add a center "axle", but I probably won't.

On a side, I read a shop describing how they spent 2000 hours on a full restoration. I'd like to know how they did that;)

I personally did all the work on my truck and have over 1500 hrs in it. I didn't paint the outer shell, left the original patina, and could have added another 500 to 800hrs on top. It's not hard to add up time. Keep it up looks good. My engine cradle was full of grease and grass from an animal.

JMD 02-26-2018 03:18 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Took some doing, and it was a little unorthodox, but it's out.

197D_C10 02-26-2018 12:11 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by stevenfromtexas (Post 8196616)
hey brother, is that the 506 medium blue? i love your color!!!

Thanks bro. I forget the exact name of it, but its a Lexus color. My son picked it out.

RodnRudy 02-26-2018 08:07 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
I stuck the pistons, torqued the rod caps and installed the cam and timing chain/gear. That cone type ring compressor I got from Summit works slick.

RodnRudy 02-26-2018 08:11 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Couple more, can't load more than two at a time, pics might be too large?

ZEKE68 02-26-2018 11:47 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Finished the throttle linkage and some of the fuel line. Plumbed the P/S vacuum line. Installed the fuel pump. Set the radiator and shroud.

Metaldoc 02-27-2018 12:24 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Quote:

Originally Posted by RodnRudy (Post 8198319)
Couple more, can't load more than two at a time, pics might be too large?

I just pulled mine apart down to the pistons, they were still good. Looking great.

3757chevy 02-27-2018 03:16 AM

Re: What did you do to your truck today? Chapter II
 
3 Attachment(s)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .

hamjet 02-27-2018 07:10 AM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by Metaldoc (Post 8198601)
I just pulled mine apart down to the pistons, they were still good. Looking great.

That looks like a 60s 327 with that road draft tube casting in the block with the oil baffle still in place, been a while since building those. memories....

VWNate1 02-27-2018 10:28 AM

Still 'Hauling The Mail'
 
I LOVE your truck ! .

-Nate

Quote:

Originally Posted by 3757chevy (Post 8198684)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .


3757chevy 02-27-2018 01:31 PM

Re: What did you do to your truck today? Chapter II
 
Thanks Nate, I've this one twenty years now it's been good to me.

Metaldoc 02-27-2018 01:31 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by hamjet (Post 8198711)
That looks like a 60s 327 with that road draft tube casting in the block with the oil baffle still in place, been a while since building those. memories....

numbers matching 283 from my 67

Metaldoc 02-27-2018 06:41 PM

Re: What did you do to your truck today? Chapter II
 
Quote:

Originally Posted by 3757chevy (Post 8198684)
I hauled a hundred pounds of aluminum cans to the recycler , took up more space than I thought .

Hey man , have got a pic of your step side with the side showing the black ralleys with spinners against the blue paint. I 've been toying on painting mine black from silver. One hundred pounds of empty aluminum beer cans?
Thanks Derek.

Gokart Mozart 02-27-2018 08:19 PM

Re: What did you do to your truck today? Chapter II
 
2 Attachment(s)
Walked away after nearly stripping a brake fitting.

3757chevy 02-27-2018 09:54 PM

Re: What did you do to your truck today? Chapter II
 
No Metaldoc mostly soda cans and some v8 juice energy drinks and that. I couldn't save beer cans long enough to save up 10 pounds. uck:barf:

3757chevy 02-28-2018 11:06 AM

Re: What did you do to your truck today? Chapter II
 
Some times when I go to the recycler in the summer the smell of all the beer cans is almost unbearable.

3757chevy 02-28-2018 11:47 AM

Re: What did you do to your truck today? Chapter II
 
1 Attachment(s)
Only side pic I could find this morning Derek.


All times are GMT -4. The time now is 02:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com