Originally Posted by daverod (Post 3470140)

I think it needs to run to the back of the cab then blend in.;)

Originally Posted by watahyahknow (Post 3470545)

maibe try to get the driprail to end in the low corner of the spoiler thingy en blend it in from there .
from wat i see now rounding the rear corner of the door would be futile too the front of the spoilerthingy goes straight intoo the rear gap of the door .
maibe you need to iliminate the spoiler thingy in total cut it of the roof and replace it with a front part from another 65 truck turned around , that gets a smoot roof all the way to the back and you get a piece of driprail all around , you prolly need to put some metal under it to close the gap to the rearwindow

looked at the picture again are you in for some fabricating ? use a front windshield in the back too

Originally Posted by daverod (Post 3471263)

Sure you don't want to mess with it some more?:lol:

Originally Posted by daverod (Post 3471263)

Looks good.:metal: Sure you don't want to mess with it some more.:lol:

Originally Posted by MacAttack (Post 3471298)

http://tbn3.google.com/images?q=tbn:...-orangutan.jpgThanks for your totally unsolicited input.

Originally Posted by Strodder (Post 3466834)

Also taking off the A pillar was a great idea. It was rusting underneath it. Even if i was keeping it I would take it off to clean the rust, and treat it, and paint it . It is only spot welded on, and came off real easy with a chizzle.

http://belair.smugmug.com/photos/620929299_s9HML-M.jpg

http://belair.smugmug.com/photos/620929341_ia8MA-L.jpg

Originally Posted by shrunken66stroker (Post 3471430)

You do nice work, I don't care what these other monkeys say about you.

Originally Posted by daverod (Post 3471479)

Getting a little slow on the draw arn't you.

Originally Posted by MacAttack (Post 3471487)

Real style (and correct spelling) take time. :lol:

Originally Posted by daverod (Post 3471513)

Mission complete.;)