Re: project INCREDIBLE HULK 6.2L with 6L80E
 

that's very cool making that removable

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Very nice!!! When I get around to my "dream truck" build...I plan to make the engine the "jewel" in the engine bay with everything else hidden also....

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

wow awsome work under the hood, ware did u get the hood struts to go with the porterbuilt hinges??

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

:jdp:

Killer, to say the least.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

nice work Don!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

well.... i sure dont get much SMOOTHER than that, nice work

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

My metal work doesn't look that nice after I cover it with bondo and paint.:lol:

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

looking very nice

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Wow, incredible work! It looks like that engine was built just to fit in that truck!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Very Slick Craftsmanship, did we ever figure out what the dimensions are on the radiator? I was looking at the Howe site and wasn't sure....

Thanks

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

its this radiator
http://www.summitracing.com/parts/HRE-342E/

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

that engine bay idea looks killer man!

not that you need to, but i think if you made 1 more piece to make it flow from the firewall that would make it look that much better! either way, thats a great idea you got there...

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I could not find that filler panel on the Scott's web page? Was that a one off for your truck? Any way it looks great on your truck, keep it up!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

ok time to get the cob-webs off this thread...ben making some progress, but havent uploaded (until today) pics, due to my computer is on its death bed...but here are some updates non-the-less...
got a neat power steering pump resivoir that canton racing is now making, its a sweet aluminum peice with -6 an ftngs...
http://i25.photobucket.com/albums/c8...k/PC270042.jpg
http://i25.photobucket.com/albums/c8...k/PC270043.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

then i started my attention on the air intake system..since everything looks symetrical under the hood, it made sence to make the tube 'y' off the throttle body, rather then go to one side or the other..also we didnt want the airfilters to be seen or hard to get to (more on this later)...so with all this in mind, i made the 'y', cut holes in the inner fenders, welded a 4" pipe to them to make a bulkhead, then put a 90* boot on there, and made the dual ram air inlets...the placement of the in lets were determinded by a couple of factors, i wanted them to be up high enough that road debris wouldnt get in there, the outlet of the bulkhead going thru the inner fenders, and the structual design of the radiator support... with all that to work off of, the placement was determind to be up high, and to the inboard of the headlights..
here are a few build process pics, the inlets measure 6" across, and 4" wide...
http://i25.photobucket.com/albums/c8...k/P2020119.jpg
http://i25.photobucket.com/albums/c8...k/P2020120.jpg
http://i25.photobucket.com/albums/c8...k/P2020121.jpg
http://i25.photobucket.com/albums/c8...k/P2020122.jpg
http://i25.photobucket.com/albums/c8...k/P2010103.jpg
http://i25.photobucket.com/albums/c8...k/P2010105.jpg
http://i25.photobucket.com/albums/c8...k/P2010106.jpg
http://i25.photobucket.com/albums/c8...k/P2010107.jpg
http://i25.photobucket.com/albums/c8...k/P2010108.jpg
http://i25.photobucket.com/albums/c8...k/P2020112.jpg
http://i25.photobucket.com/albums/c8...k/P2010102.jpg
http://i25.photobucket.com/albums/c8...k/P2020111.jpg
http://i25.photobucket.com/albums/c8...k/P2020116.jpg
http://i25.photobucket.com/albums/c8...k/P2020117.jpg
http://i25.photobucket.com/albums/c8...k/P2020114.jpg
http://i25.photobucket.com/albums/c8...k/P2020115.jpg
http://i25.photobucket.com/albums/c8...k/P2020118.jpg
http://i25.photobucket.com/albums/c8...k/P2020123.jpg

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

very nice looking

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

classy! But a couple turbos would look better in there.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Nice work as always Don! I like the intake tubes, super cool. I bet that took some time.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

So are the aircleaners going to be the 4" tall oval ones? One on each side or how are you going to do that part? I know you said more on that later but....
It's later for me. ;)

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

they are the ones that are coned shaped and fit inside the pipe..ill get pics to better show yall..

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I like it! Nice work.

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Very nice fab work! I like it!!! Looks tough!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

I'd love to have this motor and trany combo for one of my projects! Killer work!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

man i gotta get to Tulsa and see this thing , that is killer !!!

Re: project INCREDIBLE HULK 6.2L with 6L80E
 

Man, I want one of those engine bay covers/ inner fender/ core support pieces. I dunno what to call it, but it it so cool. This should be a production piece!