Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Mike, I guess I missed this tidbit - are y'all having to move the truck and tools + the household goods or is the truck staying where it is for now?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
4 Attachment(s)
Here are a few pictures from Sunday and Monday we have been setting up the Scott's Super Slam rear 4 link ! Ride height is frame rails 4 inches off of the ground, full lift 6 inches off the ground. I will finish welding inside the brackets when I flip it all over to do the bottom sides !
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
5 Attachment(s)
Next we started working on the rear upper bag brackets, setting the Firestone F9000 bags at 9.25 inches at ride height, hoping that will be hitting that "sweet spot" for the ride quality
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
2 Attachment(s)
Next started working on mounting the AFCO shocks
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looking good buddy, cant wait to see the front completed!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looking good Mike....Jim
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looks killer bud !!!
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
1 Attachment(s)
I also picked up a LS1 intake with throttle body, still need an oil pan
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Very nice sir, you're moving right along!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
That's some good progress. Nice work!
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
4 Attachment(s)
built some upper bag bracket gussets last night
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Nice touch there, Mike!
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looking good Mike,moving right along...Jim
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Man that looks sweet! And well out of the way of a loose driveshaft, too!
Sorry, I couldn't stop myself! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
looks good buddy
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
6" locked-up? Speed bump dodger :lol: Shocks upside-down for a reason?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Looks good Mike
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
what Serpentine system are you going to run.. with the ls1 intake it wont clear the alternator.. i got a set up from dirtydingo.. its clean, simple, and cheap.. check it out on my truck.. im at work so cant post it on here, no access to photobucket..
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Which oil pan are you looking for Mike?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
you could always run an f-body h2o pump, and get the oil pan too...
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
what!...f-body? only the best car ever made! the camaro, and it's red headed step-sister the firebird....lol.
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
The LSA oil pan is another option but it is a touch deeper than the F-Body pan. The deep part of the sump is not as long a F-body pan, but still shorter than the truck pan. I was able to run the LSA pan on Korbin's '82 which has the crossmemeber raised in the frame 1.5" and still fit well.
Frame is looking good! |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
H20 is water so im thinking waterpump (coolant)
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Proud to have BUDNIK teaming up with Sarah losh's build , designing a custom wheel for SQUARE PEG !! TOTALLY PUMPED ! THANK YOU BUDNIK ! https://www.facebook.com/budnik.wheels
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Right on! Traditional, modern, race? Congratulations both ways! You guys have a final rendering yet? Possible color?
Posted via Mobile Device |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
[QUOTE=67cheby;5976415]lol, no it was the h20 pump that was throwing me but I just figured out what you meant !
haha...I thought you would know what h2o was...lol |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Quote:
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
Square wheels?
http://i80.photobucket.com/albums/j1...ps6439691e.jpg |
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
LOL...now that's funny
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
I bet it rides really rough
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
why would anyone want to " RE-Invent the WHeel " LOL
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
still going for the gt40/ford mustang elanor style like the rims you showed before ?
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
1 Attachment(s)
This is the CTS-V pan. Seems like it is the same as the LSA pan also. Which ever pan you go with, make sure you get the corresponding windage tray, pickup, and dipstick.
|
Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
thanks man !
|
All times are GMT -4. The time now is 08:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com