Re: What did you do to your truck today? Chapter II
 

my 71 K20 Burb has factory sport mirrors, no other holes found in the door..

right side mirror head was broke off when I bought it and it's a little tough parking squarely on the curb without it..

so I bought the LMC pair with built in fisheyes, cool right?

so after drilling screws to remove the door panel [saved every thread in the door btw :metal:]

chasing threads and lubing everything, I installed the mirror with three arms, yep, that's about how it went..

and now I can't see a damn thing next to the truck with it, from the driver's seat anyways :(

mirror head binds into the arm no matter which way I turn it :censored:

well, it is a 'passenger' mirror so I guess it's for passengers to see behind the truck :rolleyes:

useless as a screen door on a submarine..

door and window hardware however are all working smoothly now :)

https://dl.dropbox.com/s/n7j2ohpcd3c...17365.jpg?dl=0

Re: What did you do to your truck today? Chapter II
 

[QUOTE=Killer Bee;8252163]

my 71 K20 Burb has factory sport mirrors, no other holes found in the door right side mirror head was broke off when I bought it and it's a little tough parking squarely on the curb without it so I bought the LMC pair with built in fisheyes, cool right?so after drilling screws to remove the door panel [saved every thread in the door btw :metal:] chasing threads and lubing everything, I installed the mirror with three arms, yep, that's about how it went and now I can't see a damn thing next to the truck with it, from the driver's seat anyways :( mirror head binds into the arm no matter which way I turn it :censored: well, it is a 'passenger' mirror so I guess it's for passengers to see behind the truck :rolleyes:useless as a screen door on a submarine door and window hardware however are all working smoothly now :)

I discovered this issue with my '72 C20 and it drives me nuts.:m7: I just have gotten used to turning around and craning my neck to look out the rear window when I'm backing or when I changes lanes now.

Re: What did you do to your truck today? Chapter II
 

Greentruck got a new pair of shoes today. BF Goodrich all-terrain KO2 33x12.5 on Kelsey Hayes 15x8 wheels.

Re: What did you do to your truck today? Chapter II
 

Finally made the time to get the truck aligned.:metal:
Been gonna do it so many times but got distracted.
Last year I replaced the tie rods and ball joints (both of which were the factory installed persuasion), and used the "String Method" to get it close.
The guy said it was 1/4 inch off on one side (not too shabby), and a little out of camber on that same side.
The old truck drives like a brand spa kin new truck now:chevy:

Re: What did you do to your truck today? Chapter II
 

installed my vent windows.....wow!!! that was a chore
finished up the door panels. worked on my seat. i put a 10'' sub under the driver seat so it threw my seat off a bit. got my seat covers in a few days ago. looking forward to that when i get off thursday......yeeeyaaaaa:metal:

Re: What did you do to your truck today? Chapter II
 

I cleaned up her house. Finally so nice to work in an organized space.

Re: What did you do to your truck today? Chapter II
 

Also got steering wheel in...waiting on coupler to put in steering box...new u-joints, painted driveshaft...

Re: What did you do to your truck today? Chapter II
 

Nothing interesting to some, but I'm enjoying prepping my engine block for paint and gaskets. I never used a tap and die before this project, but I'm a believer now. I've hit all the female threads on the block etc.,. It's nice being able to screw a bolt all the way down with just your fingers.

Other than that I'm still waiting on a welder before I get the frame powder coated, and start the build. There's plenty to keep me busy until then. There will be a fresh block and transmission waiting for it when it arrives home. Man this takes up a lot of time:chevy:

Re: What did you do to your truck today? Chapter II
 

I used ear plugs to fill the holes for paint to keep the threads clean.

Re: What did you do to your truck today? Chapter II
 

That's a GREAT idea, thanks. I may brush POR15 on, but if I spray I'll use them. Heck, may use them regardless.

Re: What did you do to your truck today? Chapter II
 

Got some paint on the ramp truck tilt column.:chevy:

Re: What did you do to your truck today? Chapter II
 

I ran my front brake line mounting hardware under a wire wheel and cleaned them up. They look like they are original, and I am glad to have them. Could they be stainless?

Re: What did you do to your truck today? Chapter II
 

Finally got my base model side markers. I know it wasn’t original but I went ahead and wired them up, can’t be too visible these days. Just used Scotchloks so no damage done. Put new dash vents in. And replaced the air control lever that broke.

Re: What did you do to your truck today? Chapter II
 

seat bottom last night.....
and door panels a few days ago

fixing to work on the seat back. waiting on my seat belts to bolt everything in

Re: What did you do to your truck today? Chapter II
 

friends don't let friends use scotchloks :no:

Bodge Repairs
 

My Son who's also a Journeyman Mechanic likes to say 'where you find a scotchlock connector you'll find a problem ' .

Re: What did you do to your truck today? Chapter II
 

Finished welding in the rocker and cab corner. Next is the new cab mounts, control arm bushings and core support bushings

Re: Bodge Repairs
 

What, why? We’ve never had any issues with them. I dialecetric greased the contacts and sealed the ends with liquid electrical tape. Mine are inside the rubber boot on the tail light on the rear so they’re not going to get banged around. What would be your recommended solution without pulling the wiring harness out?

Re: What did you do to your truck today? Chapter II
 

Finally got the rubber floor mat from LMC, it’s pretty nice, hated having to cut the hole for the shifter, a little nerve racking cutting a brand new mat. Replaced the hood shock insulation, made a world of difference shutting the hood and hitting bumps. Replaced the dash vents. Replaced the air control lever that broke. Got rid of the plastic rear view mirror and put an old school looking chrome one on.

Re: What did you do to your truck today? Chapter II
 

Repaired a few dents in the roof. Absolutely love this tool! Must have if your doing body work.
Pushed the turn downs back a bit. Pointed them straight out as well. Sooo much better back from the cab. Gets rids of exhuast fumes and the drone of the mufflers. Also not kicking up dirt when driving down a dirt road.

Re: What did you do to your truck today? Chapter II
 

Those are awesome. Dad did bodywork for 20+ years and he always talked about how useful those were. He still uses his quite a bit.

Re: Bodge Repairs
 

how many years of experience do you have with automotive electrical?

greasing, taping, sealing, whatever defeats the intended purpose of a scotchlok as a quick connector, might as well install a proper connector and enjoy a good connection..

I'm tired so I'll let the interwebs answer the why questions..

The Problem with Wire-Tap Connectors

as far as what you should do, stop making midspan harness intrusions and run your accessories to a reliable source like the fuse box or a junction box..

besides the conductor wire damage to original circuit and the insulation damage, the circuit is now possibly overloaded with the new circuit you introduced..

new circuits should have their own circuit breaker or fuse protection properly sized for the component rating and intended load..

let us know a specific wire run and we can assist you..

apologies for drab answer, but I'm pooped at the moment..

good luck!

Re: Bodge Repairs
 

I read the article, I had no idea, we’ve just always used them. It’s one of those things that seems to work all those years, and then someone mentions it’s wrong.

The place Dad worked produced flatbeds on the side and installed them. He said the guys who wired them did every single light on them was with scotchloks. Which was a lot of lights. Why? I don’t know, but he said they always worked and never had any complaints.

If the circuit was overloaded wouldn’t it blow the fuse that it’s wired to?
And why not just solder the connection and then upgrade the fuse if so?
Running a wire from the rear of a long bed to the fuse box for marker lights would be a pain.

Re: What did you do to your truck today? Chapter II
 

Scotchlocks are a prime place for corrosion to begin .

Even here in the Southern California Desert they cause all manner of dim and flickering lights .

When I wanted a trailer plug for my '69 C10 I got a spare sub harness from the junkyard and worked it into the stock harness using the factory plugs .

I have no idea how GM made their accessory trailer sub harness' but this is how most other manufacturers did it way back when .

Saying 'that's too much work' means you're not the right one for the job .

If your setup works, don't sweat it, just remember to look there first if ever any problems .

Re: What did you do to your truck today? Chapter II
 

I sealed them up really good and I didn’t even really know I should. I really just always over do everything. I didn’t say “That’s too much work.” I just said it would be a pain.
And that’s what I’ll do, if it’s not broke don’t fix it. But now I know to be wary of them in the future.