Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
I am always impressed with your progress. I can see the first test drive coming just around the corner. Can't wait. |
Re: My Dusty 71 GMCe Electruck
I like the way the battery trays could stack in the compartment. It'd have been hilarious if the c10 rear shaft and the Lexus front had mated right up. Great work, keep it up. When this runs, it'd be fun to hook it up and get some comparative performance numbers.
|
Re: My Dusty 71 GMCe Electruck
Quote:
Quote:
and you did not hear it from me but someone's turning fiddy in May so it sure would be nice to maybe git a test drive for his birthday, just sayin' |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
the Mountulator 3000
... and please don't go all Anglesuxon on me, this is just a mockup |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
looks like both my Transmission and the short drive shaft sit at the same angle of 7.5°
please let me know if you all think that's too much on the slant? I honestly don't know if it is or not, we can raise the tail of the trans sum if need be |
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
Quote:
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
one more look, without the rear rubber donut this time
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
here's a video update: Electruck EV Conversion Update 1 Lexus GS450h Transmission Mount
|
Re: My Dusty 71 GMCe Electruck
Loved your crowstar!
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
let me know if you know what these are and if there is a difference?
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
so I finally liberated the steering linkage, I believe the disc brake conversion calls for different tie rod ends
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
time to go after that crossmember
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
and let me tell ya, she put up a fight
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
there was no way gently tapping the upper control arm spindle knuckle was gonna brake her loose
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
not even a 4' cheater bar and a vice would press her out
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
driver side lower control arm
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so see them alignment shims, I swear every time I work on the control arms I loose these, or mix them up, or loose track of them somehow
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
but today I was ready for these little rascals to go flying right into my pre labeled zippie zip baggies
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and what did they do after I loosened them bolts? did they drop straight to the floor or some black abyss
No, nope, they just stayed there, laffin' at me!!! |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
document (although four per side they are of different thickneseses)
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
well between cleaning the garage a bit, and the 7 trips to the parts house to rent the proper pullers I only got one side removed
|
All times are GMT -4. The time now is 07:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com