![]() |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
jeez i'm stupid, just noticed i forgot the upper rad hose..:dohh:
|
Re: '64 chevy 2wd to 4wd
It may have fought you, but it came out awesome. It looks great with the top and topless. I didn't notice the hose either. LOL
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
would'nt mind one more later and build it as a Jimmy, always been fond of the 67-72 gm grille. and i threw the hose in.. Attachment 1596561 and i have been searching for another '50 so i could make a super cab, but after weeks of looking, no success. unless i want to pay $60 or more with ship & exchange & customs.....and all i really need is just the back of the cab & the running boards- just cant justify the cost for that ...:waah: (aint telling the wife, but i already got about $40-50 in aftermarket for it, tires, axles,etc) but i do have plenty of styrene.... except for angle, which i need more of...:lol: so, taken a different route with the '50 Attachment 1596557Attachment 1596558Attachment 1596559Attachment 1596560 |
Re: '64 chevy 2wd to 4wd
2 Attachment(s)
|
Re: '64 chevy 2wd to 4wd
The camper is an awesome idea. This is going to be bad @$$.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
eh, got to stretch this out Dale, stash is mighty low...:lol:
wit all the snow we got came a lot of shoveling... did'nt get nearly as much done as i was hoping swapped out the platic wood for some real wood. also shaved off the front bed braces- just did not "flow" in my eye... Attachment 1599156Attachment 1599157 first part of the camper- decals on. will make some blue window frames, add some jacks & lights and a grab handle. awhile ago when i made that canoe, enjoyed it, so making one for the camper, which means it will also need a ladder & roof racks Attachment 1599158Attachment 1599159Attachment 1599160 |
Re: '64 chevy 2wd to 4wd
Looking good, enjoy that snow...lol How's your dental work coming?
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
snow, or more so the cold has been causing me nothing but grief on my '90 stepper Dale. doors keep freezing shut, pulled the weatherstrip off a couple times, tried getting the canopy lid open and the drivers handle snapped in half, then it bagged my starter, had to walk a couple miles home in -10 windchill....:waah:
so i said the hay with it, parked it, & re-insured the crewcab yesterday. half to use 4 hi a lot, in 2wd the locker keeps kickin' it sideways :metal::metal: and i got 3 teeth done, 6 left. dentist fixed the half broken one, ripped out the nerves & re-capped it, and root canaled 2 others, shoved them back up, and fixed the chips on them. need 3 implants, their next. got held up cause a 3d scan showed up a fracture in my jaw where the teeth broke below the gum line . so thursday she jammed a screw in there & shot in some silicone, cement, mastic, whatever it was...give it some time, then she will try doing the implants.....woo-hoo, 2 more root canals coming up..:lol: in 3 visits she has jammed me with a needle 23 times!, but thats my fault, i told her i WANT "gentle dental".... and have got a couple things done on the camper, just making axles for the truck furnace and fridge vents are on, lites, ladder, and the glass is in, it's just clean at the moment, hard to see...lol Attachment 1600745Attachment 1600746Attachment 1600747Attachment 1600748Attachment 1600749 |
Re: '64 chevy 2wd to 4wd
Camper is looking great. Sounds like you'll have your mouth back together soon. I'll quit complaining about how cold it is here. Your cold temperatures are way worse. ...lol
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
going to see her this friday...(dentist, man, almost 45 yrs without seeing one, then the last 5 yrs here.....jeebus...:waah:) and we finally broke above freezing! still got a lot of snow though- blah! stupid thing, after all this snow for the last couple weeks, today me & the boy are going up the Coquihalla....in the snow... :lol: got a couple trucks for christmas, hobby store nearest us has a real hurtin' selection of chevy's, but wife snagged me the wrecker, and my son got me the '41. half to figure out what i'll do with the '41, wrecker is easy- another "Alpine off road recovery" truck for the fleet :metal: Attachment 1603608 son also got me this KX (almost an exact match for my old 1:1 KX) detailed it up a bit, mite use it on the '50 on a front hitch mount, but i think it's a 1/32. in my eyes it seems a little off scale. i'll wait and see Attachment 1603611Attachment 1603612 not a lot done on the truck, been doing other stuff. body work is 95% there though Attachment 1603609Attachment 1603610 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
have been farting around with the camper mostly.
i really, really need to get my eyes checked. i never noticed that dimple on the camper this whole time :waah: now i got to try figure out what to do with it.... thinking i'm also going to re-paint the ladder black to match the roof rack Attachment 1603618Attachment 1603619Attachment 1603620Attachment 1603621 |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
here's where i been spending most of my time lately.
it seems the smaller you go, the bigger the price gets...almost a hundred bucks for just a few accessories, so i been getting creative (spell cheap...:lol:) my sink is an Advil pill blister pack, not sure what the "fridge" is or from what, stove is scratched out of plastic with speaker wire grilles, and you dont really want to know where the fabric came from...:lol: ok, i'll tell ya, the ONLY blueish material that was kinda to scale in my whole house, was a pair of my "used" fruit of the looms (just dont sniff it..:lol::lol:) still need to add curtains (not F.O.t L.'s) and some camper jacks, and whatever else pops into my head Attachment 1603623 Attachment 1603624Attachment 1603626Attachment 1603627Attachment 1603628 |
Re: '64 chevy 2wd to 4wd
I got a question. Are you stripping the paint off of a painted model? If so what is your process? Thanks.
|
Re: '64 chevy 2wd to 4wd
Sorry it's been so long but I've been doing long hours. It's looking great, you're doing awesome. Keep it up and Happy New Year!!!!!!!!!
|
Re: '64 chevy 2wd to 4wd
3 Attachment(s)
Quote:
Castrol Super clean is your friend, the purple stuff. fill up a tupperware tub and let it soak, rinse off with cold water. usually soak a couple days for a easier strip Attachment 1605437Attachment 1605439 and for tougher paint, good 'ol DOT 3. same process as the purple, and rinse it with cold water too Attachment 1605438 a lot depends on how the paint was applied, and what kind. some tougher paints (marine) i have soaked parts for a week and still have to scrub the old stuff off. the castrol also strips chrome off any model part in about 15 mins if you dont like flash on your models. |
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
Quote:
and thanks and Happy New Year to you too! last couple pics of a dying year...:lol: zee chevy stands on it's own, still needs everything, but it's up on four...even loaded, no sagging tail dragger :lol: Attachment 1605448Attachment 1605449 Attachment 1605451 only canoe's i could find blue were Coleman's & Old Town's. Old Town's logo was just letters & pretty boring, so another coleman it is... Attachment 1605452Attachment 1605453 |
Re: '64 chevy 2wd to 4wd
It's starting off as a good year. I woke up....lol. The 50 is looking great. Ilove the camper and the conoe.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
yup, waking up is half the battle....:lol:
things were cruising along nicely. changed the trans crossmember to fit the 427, just squeaks in on the inner fenders (with some tweaking) good clearance on the rad, but i did'nt check the exhaust :dohh: six'er is a lot narrower then the 427. Turbo is much wider too Attachment 1607230 exhaust is now banging on the frame...one thing the '50 has is real good vertical clearance under the hood. going to raise the motor mounts a bit, and prob put a tiny notch the frame Attachment 1607235Attachment 1607236 started on the int. pretty much stock. just added the shifters and turn signal Attachment 1607237Attachment 1607238 |
Re: '64 chevy 2wd to 4wd
The stance looks great. I like the interior color too.I'm guessing trucks going to be blue.
|
Re: '64 chevy 2wd to 4wd
5 Attachment(s)
thanks Dale!
yeah, blue, blue, blue...gm medium brite blue. was digging around in the shed and found 2 frozen cans i was able to bring back to life...:lol: really need to mock up more of the motor (i usually use just the block..) was a bit more involved than i first figured. notched the frame and raised the engine mounts, also had to take 3/16 off the bottom of the inners, shaved the firewall thinner & bent the exhaust manifolds a bit...but it's in there... Attachment 1609086Attachment 1609087Attachment 1609088Attachment 1609089Attachment 1609090 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
woke up this morning to more of this stuff.....:waah:
snow day at work....:metal: more work on the '50...lol Attachment 1609092Attachment 1609093 these were a real p.i. the butt! tailgate hooks, took hrs, and made about 10 of them 'till i got the shape i liked....or stopped dropping them on the floor, never too be seen again.....some other junk.... Attachment 1609094Attachment 1609095 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
got most of the chassis done...
Attachment 1609096Attachment 1609097Attachment 1609098Attachment 1609099 |
Re: '64 chevy 2wd to 4wd
4 Attachment(s)
body work is done, ready for some color....
Attachment 1609101Attachment 1609102Attachment 1609103Attachment 1609104 |
All times are GMT -4. The time now is 06:27 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com