![]() |
Re: Its Mine the World Famous 67 Dragtruck
Those are sweet. It leaves twisted now but I'm gonna try to fix that!
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
Re: Its Mine the World Famous 67 Dragtruck
Hey leftcoast,
Do you happen to know what year these came on ? Just curious, the bolt holes are offset if that helps. They're going on a set of pretty nice 034 heads with shaft mount rockers. Don't tell anyone, it's a secret. |
Re: Its Mine the World Famous 67 Dragtruck
Quote:
|
Re: Its Mine the World Famous 67 Dragtruck
I found it. They came on 55 to 59.
|
Re: Its Mine the World Famous 67 Dragtruck
my bad on the extra 10 ft it's been almost 20 years since i've crossed that stripe! it won't be another year though. 09 i'll have some video and #s hopfully 1/2 way respectfull #s
|
Re: Its Mine the World Famous 67 Dragtruck
good luck with your times I was just pickin at you about the 10 ft.
|
Re: Its Mine the World Famous 67 Dragtruck
Hey,
Think I'm gonna' try the 4-7 cam swap. I've got a freind picked up 2 tenths and says it takes some harmonics out. Any thoughts or comments ? |
Re: Its Mine the World Famous 67 Dragtruck
there was a story about it in the hot rod a while ago and i seriously considering doing the same
|
Re: Its Mine the World Famous 67 Dragtruck
My next cam is a 4/7 swap!
|
Re: Its Mine the World Famous 67 Dragtruck
70rs/ss talked me out of the extra $$$ for the street but for the
track I don't see passing. Did I mention my freind picked up 2-tenths. And he's NO ROOKIE |
Re: Its Mine the World Famous 67 Dragtruck
Cross your fingers guys I took a 502 block to the machine shop yesterday hoping it will clear at .030. With my stroker crank that will make a 548.
|
Re: Its Mine the World Famous 67 Dragtruck
fingers and toes crossed ....... let me know wat happened
|
Re: Its Mine the World Famous 67 Dragtruck
Block is fine we are gonna have a 548 in there by spring.
|
Re: Its Mine the World Famous 67 Dragtruck
it's gonna be nasty! if i get back down to panama city fl for work i'll hit ya up and make a road trip your way. phipp
|
Re: Its Mine the World Famous 67 Dragtruck
Quote:
Cool. |
Re: Its Mine the World Famous 67 Dragtruck
glad to hear it wasn't junk, good luck
|
Re: Its Mine the World Famous 67 Dragtruck
I actually did some trading and got a bowtie block so if it checks out I may run it to keep from having to run gen VI stuff. The gen Vi block is already bored but the guy it belongs to really didn't want to sell it anyway so he may keep it for his boat if the bowtie block checks out.
This thread needed another post I wasn't liking how many it had. |
Re: Its Mine the World Famous 67 Dragtruck
Quote:
Hope you have great luck with the new engine. Lee |
Re: Its Mine the World Famous 67 Dragtruck
I'm gonna upgrade the anti roll bar to get it not to twist as much. It has twisted since I bought and Tom said it did this with him also.
|
Re: Its Mine the World Famous 67 Dragtruck
i've seen on a couple of ocasions they used an helper airbag inside the coil to counter that
|
Re: Its Mine the World Famous 67 Dragtruck
that wouldn't work for me as I don't have coils. I have coilovers but I haven't tried stiffening the right shock but it might help a little.
|
Re: Its Mine the World Famous 67 Dragtruck
it would take some trail and error but you might want to experiment with heavier spring on one side instead twisting up the shock on one side might as this might end up unbalancing the truck halfway down the track do to the thumb when it hits bottom
or mount shockwaves (pricey) |
Re: Its Mine the World Famous 67 Dragtruck
Hey DJ
Dont mean to change the subject but what RPM do you leave the line at? I know track conditions are an issue but was curious about how much your able to put down without getting scary. Thanks |
Re: Its Mine the World Famous 67 Dragtruck
I have a pretty tight convertor so I don't have a huge window to work with. I have left from 3000 to 4000. 4000 is up againest the convertor. The truck actually like more power on the starting line. With the bigger slicks (33x10.5w's) it would take all I could throw at it. I left on 250 and 300 shots of spray. Tom actually left on 2 kits with a 31x10.5w.
|
All times are GMT -4. The time now is 07:58 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com