Re: Daverods project 66
 

I told you to keep those blow up dolls in your secret room.:lol: How much do those things cost anyway? They sure look real.:lol::lol:

Re: Daverods project 66
 

They may not be real, but at least they're patriotic :lol:

Re: Daverods project 66
 

Uhmm... It's bad here as far as 'aftermarket accessories' for the female gender. Some of the chicks running around here don't look as real as that pic :)

Re: Daverods project 66
 

its a fasion statement more than that girls need it in my eyes .
i seen 16 / 17 year olds with perfect tits go to the surgion to make them bigger and get there lips filled until they look like a guppy
women are unique and its wat makes them atractive in my eyes wat they do is make them all the same way to fit the same mould
a nose job i can understand , someone having there natural breast made smaller do to backproblems too , but getting bigger tits because youre girlfriend has them is just stupid (dunno if you ever seen the la ink series in wish pixy tried to talk kat von D intoo bigger tits because she didnt fit intoo a bathingsuit is the kind of stupidity im talking about )

a lot of the types of silicones ("baloons" filled with saline solutions are the exeption) they use in operations like these could cause cancer and it makes feeling for (cancer)growds difficult .
theres a lot of people dying prematurily of that deceace allready theres no need to tempt fate

Re: Daverods project 66
 

:lol::lol: You'r really thinking to much.:lol: Go work on your truck.:lol::lol:

Re: Daverods project 66
 

Dave, we need to get together this winter and go ride,ride,ride! Your trucks looking good btw.

Re: Daverods project 66
 

I go up to IP all the time we have a cabin on the Buffalo. I'll let you know when we go up to IP. Early in the season we go to Preston they get some good snow there, somthing about the lake effect from Bear lake. I would like to see your new place.:metal: What you ridin?

Re: Daverods project 66
 

What can I tell ya, I own a Corvette :lol:

Re: Daverods project 66
 

:haha:

Re: Daverods project 66
 

Dave--Are you slacking off on the truck already or just hunting again?:splat:

Re: Daverods project 66
 

Kinda slacken;)Waiting for my trans.

Re: Daverods project 66
 

I got my spindles toay. Forgot to order the $75 bracket that holds the calipers. Thinking about just using new cailpers.With modular spindles your stock caipers won't mount on unless you buy a bracket. My old dust shields won't work ether. Don't know what to do there? Wonder if I even need them?

Re: Daverods project 66
 

Ordered my bracket. Took my rotors down to be ground, picked up new calipers, pads, and bearing. All this for $105.:metal: Guess they don't make dust shields for the modular spindles.

Re: Daverods project 66
 

:wop:
Sorry Dave

Re: Daverods project 66
 

It's ok;)
This much I know.:lol:Pick up my rotors and calipers tomorrow. Don't get the brackets for a week. Need to save up so I can get new upper and lower control arms. I did get the track on my rmk. Need to get some bags and stuff for the front. Think two ply bags are Ok?

Re: Daverods project 66
 

are you going to be low enough? i think you need to z the frame. :metal:
are you laying rocker?

Re: Daverods project 66
 

Lookin' good!!! But how does that Polaris suspension fit into the spindles?:lol:

Re: Daverods project 66
 

What size wheel are you going to use? You must know the height of the tire and wheel before you make your air bag cups. The angle on your ball joint could be too much, and it could fail. Be carefull.

Re: Daverods project 66
 

The frame belly is on the concrete.;)

Re: Daverods project 66
 

I think I want 20" or 22". How do you change the angle of the ball joint?:uhmk:

Re: Daverods project 66
 

When I get the suspension back where it belongs then I can spend more time on my spindles.:lol:

Re: Daverods project 66
 

New A arms. Or if you could put a wheel on it with the same height dimensions. That would help a lot to see how low you really need it. It might be laying frame with no wheels on it, but it's not an accurate way to check.

Re: Daverods project 66
 

what do you mean by frame belly

Re: Daverods project 66
 

Belly!~:lol:belly

Re: Daverods project 66
 

the crossmember

Re: Daverods project 66
 

So I'm not laying frame. And I need one 20" rim. Damnit.

Re: Daverods project 66
 

It touching.So's the frame.;)

Re: Daverods project 66
 

dang thats going to be sweet :metal:

Re: Daverods project 66
 

I get my rotors tomorrow I'll put some wheels on then.:sumo: Does the out side diameter of the tire change with the different rims?

Re: Daverods project 66
 

Put the tire size you want to use on the front, and take the diameter size and divide in in half, and take that measurement and measure from the spindle shaft to the ground. Do this with the frame on the ground.
Use this chart.
http://www.miata.net/garage/tirecalc.html

Re: Daverods project 66
 

Right now I have 12" from the ground to the center of the spindle. So how about 155 30 20's that gives me 11.85". or 145 35 19's are 11.54"? Sweet chart. So I want the wheels more or less than 12? "Less right. or doest it matter that much?

Re: Daverods project 66
 

Dave if you run those tire sizes you will have really thin tires. And I dont believe anyone makes those tires sizes. You have to think most 16" car tires are about a 205.

Re: Daverods project 66
 

I wish I could be more help, but I never did 60 to 87 trucks. Lots of 88 and up though. And made them lay frame. It looks like you need to get the front suspension to drop lower.

Re: Daverods project 66
 

the porterbuild dropmember would be just the ticket its designed to lay frame with 22 inch wheels .
with the original crossmember adapted you still have the original steering and the alighnment will be out of wack when youre running low along with the clearingproblems with the oilpan and the headers that need to be atended too , the porterbuild dropmember is practicly a bolt in and uses a ford rack and pinion this tightens up the steering a lot and keeps the wheels aligned a lot better troughout the up and down motion its allready has the pads for airbags
he changed the geometry a bit so the wheels are a bit forwarth in the fenders to be able to fit bigger wheels and make the wheel look more centered in the wheelwhell

he recently added a new treat to the forum plugging his newest version and the A arms hes now building

nathan porterbuild is a verry nice person and a good man to do busness with he keeps to his word unlike others i dealt with

Re: Daverods project 66
 

Dave you got me thinking last night. You can also raise the front portion of the frame in front of the cab. Like you would do in the rear. It would raise your engine too, so you can't go too high. It would for sure get your 20s on and lay frame. You would also have to drop the front portion of the frame in front of the cross member to mount the sheet metal and bumper. Lots of work, and the cheapest way to go.
Watahyahknow's idea is good too, but looks like it would be expensive. Do you have a link to there web site?

Re: Daverods project 66
 

You've just described a frame 'Z' where the frame stub is cut-off & re-attached higher vs. the original rails. If you've got more time/talent vs. money, it's worth doing. If your lacking either, Nathans Dropmember does the same thing & fixes many 'compromises' that people experience when notching a stock crossmember (and the extra work for the radiator core support when doing a 'Z').

I've done the crossmember notch but it doesn't give you much for the work. To combine a c.member notch + frame 'Z' is just extra work. Skip the c.member notch & raise the rails up more when doing the 'Z' (I realize the OP has already done the c.member notch).

Re: Daverods project 66
 

I know it's called "Z"ing the frame. Not everybody knows that term. I think Dave has the talent to do it. It's a lot of work, and scary to do.

Re: Daverods project 66
 

I figured as much but wanted to insert the 'term' w/the description for those not familiar.

Re: Daverods project 66
 

You described it better :lol:

Re: Daverods project 66
 

see dave i told you that you need to z the frame :D