The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1967 - 1972 Chevy/GMC Suburbans and PanelsProjects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=212)
-   -   1969 SuperBurb build-up (Bagged and Blown!) (https://67-72chevytrucks.com/vboard/showthread.php?t=200387)

Hart_Rod 01-19-2010 03:09 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
2 Attachment(s)
Quote:

Originally Posted by Jvsapp (Post 3717394)
when i was doing some research into replacing the wood on my morris traveler, i was looking into having some boxed tube that i would construct the wood replacements out of wood grained. there's a couple sources out there that use a wood grain pattern on a roller. they put paint onto a wood grain pattern, then using a foam roller they transfer the pattern to the roller, then onto the metal. i'm not at the point yet of either ordering wood, or doing the boxed tube and getting it wood grained, but i would imagine it's an alternative. the sites i came across had the whole dash on some 40-50's full wood grained. and it looked real. if you like i can see if i can dig up some of the links i found.

Quote:

Originally Posted by Frizzle Fry (Post 3717635)
I say ixnay on the wood grain (since you didn't ask ;))...but it'll look good no matter what.

Quote:

Originally Posted by propaint81 (Post 3717697)
looks freaking awesome man cant wait to get somw color on mine, where did u find the bucket seats?

Quote:

Originally Posted by 71blksuper4x4 (Post 3717725)
Rob, the aftermarket woodgrain tape is fine. It has did well as my truck was a daily driver for 2-3 full years, albeit you'd be fine with it. I would advice against the clear as it would crack and peel. If you are worried about it peeling off, get you some 3m 94 brushable primer, it makes the woodgrain almost impossible to remove, and it dries clear. To condition it, use Pledge, or similar product. Trevor

Quote:

Originally Posted by jbclassix (Post 3718168)
Painted woodgrain is always an option...

Quote:

Originally Posted by LOW DOUGH (Post 3718338)
Is the trim piece backwards on the DS Door? The little indention on the upper part of the trim for the door to open without hitting the finder looks to be on the back of the door.


DS Door... am I right??
http://67-72chevytrucks.com/vboard/a...1&d=1262831509


These look right.


Or are they just sitting on there for the pic? If so then you are probably using the same piece for all the pics. But I am sure the rear door is shorter then the fronts.

They look really good on there either way.

Am I calling out each door correctly?


LowDough you got it right.

Thanks for the tips guys. I think I'm going to stay with the balck trim for simplicity.

Super secret update.... well just a tease....change is a coming.....:D

Frizzle Fry 01-19-2010 03:16 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
YOU :devil: :devil: :devil: :devil: :devil:

Palf70Step 01-19-2010 07:00 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Man, I cannot wait till she is all together and over her for CTC!!!

Hart_Rod 01-28-2010 10:01 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
4 Attachment(s)
Back in my garage, updated pictures....:metal:

jmedero 01-28-2010 10:07 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Man your an animal!!! That looks good. Can't wait to see it in person.

VA72C10 01-28-2010 10:16 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Beautiful!!!

Number98 01-28-2010 10:45 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Quote:

Originally Posted by jmedero (Post 3764850)
that looks good. Can't wait to see it in person.

x2

Hart_Rod 01-29-2010 04:09 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
4 Attachment(s)
More pictures....:D. Opened up a box of goodies too! :metal:

gcburdic 01-29-2010 04:39 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Looking forward to seeing this one roll Rob!

jmedero 01-29-2010 05:36 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Cool bro! I'll have to cone see it next week when I'm back in town.

Wildstreak 01-29-2010 06:26 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
I cannot wait to see that accuair installed!

lolife99 01-29-2010 06:31 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Man,...
That's the best looking 'burb on here.
Very nice!

br161 01-29-2010 08:44 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
smokin' hot burb!

nuke1 01-29-2010 08:56 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
looking sharp! mind me asking, but what did the air setup run you? just pm me if you want

pcmcobra 01-29-2010 09:30 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
I want to know how you got it up that mountain of a driveway?

CheyenneShop 01-29-2010 09:46 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
:jdp:Dude, this thing looks friggen awesome! Paint turned out great. I agree - go with the black trim.

What is your plan with the tail light bezel? Just asking cause you took a picture and it looks like it may run into top trim?

Looks great, can't wait to see what her new shoes are going to be:ito:

Ronnie

Rokcrln 01-29-2010 10:21 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Quote:

Originally Posted by Hart_Rod (Post 3766480)
More pictures....:D. Opened up a box of goodies too! :metal:

Now we are talking:metal: The paint looks fricken great!

Kevin
LFD Inc.

72BlckButy 01-29-2010 10:29 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
:jdp:

Rob, that thing is awesome!!!

Wildstreak 01-31-2010 06:13 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
do you know what youre going to do with the headliner? are you going to run rear a/c?

Hart_Rod 02-01-2010 01:15 AM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
4 Attachment(s)
Quote:

Originally Posted by jmedero (Post 3766639)
Cool bro! I'll have to cone see it next week when I'm back in town.

Just give me a call.

Quote:

Originally Posted by Wildstreak (Post 3766733)
I cannot wait to see that accuair installed!

In progress, pictures soon to follow, :).

Quote:

Originally Posted by br161 (Post 3767003)
smokin' hot burb!

Quote:

Originally Posted by nuke1 (Post 3767024)
looking sharp! mind me asking, but what did the air setup run you? just pm me if you want

PM sent.

Quote:

Originally Posted by pcmcobra (Post 3767100)
I want to know how you got it up that mountain of a driveway?

650 ftlbs of pure Duramax!!!

Quote:

Originally Posted by theCheyenneShop (Post 3767151)
:jdp:Dude, this thing looks friggen awesome! Paint turned out great. I agree - go with the black trim.

What is your plan with the tail light bezel? Just asking cause you took a picture and it looks like it may run into top trim?

Looks great, can't wait to see what her new shoes are going to be:ito:

Ronnie

Looks like black trim wins, ;). I am going with full trim. I've still got a few more surprises. Picking the wheels is probably going to be the hardest part.....

Quote:

Originally Posted by Rokcrln (Post 3767245)
Now we are talking:metal: The paint looks fricken great!

Kevin
LFD Inc.

Thanks Kevin. I still have to finish the piece you made for me. It will be the last thing to go on....

Quote:

Originally Posted by 72BlckButy (Post 3767262)
:jdp:

Rob, that thing is awesome!!!

Thanks Nate.

Quote:

Originally Posted by Wildstreak (Post 3770986)
do you know what youre going to do with the headliner? are you going to run rear a/c?

No rear a/c. Just going to insulate the heck out of it and hope the Vintage Gen IV unit can keep up with the FL heat. I'm not sure yet. I'll probably have the guy that did the seats do the headliner and carpet.

Quote:

Originally Posted by br161 (Post 3767003)
smokin' hot burb!

Thanks!

Quote:

Originally Posted by gcburdic (Post 3766533)
Looking forward to seeing this one roll Rob!

That make 2 of us Geoff, :lol:

Quote:

Originally Posted by lolife99 (Post 3766741)
Man,...
That's the best looking 'burb on here.
Very nice!

Well, I'm not sure about that, there are some great looking rides on here. Thanks you for the compliment.


As for the AccuAir install, I've got the compressor and tank mounted were I want it. No pictures, as I need to pick up some bolts and fittiings tomorrow to get it fully mounted. I did snap these pictures though and I'm totally digging the houndstooth, :metal::metal::metal:.

r/

hgs_notes 02-01-2010 02:19 AM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Looking 4.0

VA72C10 02-01-2010 10:31 AM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Those really do look great....the houndstooth really works with the red and white....All black would have been nice too but not as nice as that ;)

big_al_71 02-01-2010 03:54 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Rob, my question is how much patience do you have? Reason I ask is because one project is a pain and from what I see you three of them going at the same time even though the 68 is driveable?
You are a better man than me I deal with one at a time and I go nuts sometimes..:lol: I am more into SWB but looking at your suburban, I tell you yours looks REALLY good!!!!:metal:

mcbassin 02-01-2010 05:12 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
That burb is looking great! Man you are so close to being done it's hard to believe. You need to get out there and finish it up Dude!

my67chevytruck 02-01-2010 05:21 PM

Re: 1969 Burb build-up (Bags, 5.3/4L60E, repaint, interior....)
 
Nice Burb Rob!


All times are GMT -4. The time now is 08:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com