![]() |
Re: My 1965 build thread
Looks like your doing a great job. That gap you are referring to is where the wires will lay. The flange is where the weatherstrip attaches. I don't have a good pic of it being done showing the gap. Here is mine before surgery. You can see a wire running thru there and the gap. The spot weld go down in that area onto top of the inner rocker. I guess I should have took some better pix.:lol:
http://i369.photobucket.com/albums/o...truck029-1.jpg |
Re: My 1965 build thread
Thank you Alan. Now just going to check my door gap before I weld it in place.
|
Re: My 1965 build thread
Ya'll ever start on a project and half way thru it you ask yourself what the hell was I thinking? :lol: Well tonight was a perfect example for me. I went out with the full intentions of getting the column done so I can get it ready for paint. I did get the upper nuts tacked in place. i then took the column out to work on the nuetral safety switch. My thinking was I could duplicate the openings, so that is what proceeded to do.
http://i369.photobucket.com/albums/o...2/DSC08960.jpg http://i369.photobucket.com/albums/o...2/DSC08963.jpg I was taking step by step pix to share with ya'll. Once I got to this point is when it hit me..........That's stupid you dumb A$$. My thinking is I can cut out a square around the original location and move it up the column. The piece I cut out can fill the hole where the original one was. It will be alot cleaner and will allow me more access to the inner shaft so I can cut it as well. I will weld the piece I cut out tonight back in and start over. Don't ya'll think that would be better?:smoke: |
Re: My 1965 build thread
Sorry, I dont follow what you are pointing out; you did a good job with the tape, however:lol:.
|
Re: My 1965 build thread
Maybe this will help out. Weld the piece I cut out and start over by doing this.
http://i369.photobucket.com/albums/o...DSC08962-1.jpg |
Re: My 1965 build thread
Good idea Allan, but what do you have to do to the inner shaft make the switch work? Isn't there an easier way? You got me thinking now.
|
Re: My 1965 build thread
I would just bypass the nutral safty switch
|
Re: My 1965 build thread
Quote:
Quote:
After I got my measurements and a plan this is what happened. I didn't take pix of the cut I made on the inner tube where the switch is activated. It looks almost like the original hole just in a different location. http://i369.photobucket.com/albums/o...2/DSC08968.jpg http://i369.photobucket.com/albums/o...2/DSC08969.jpg http://i369.photobucket.com/albums/o...2/DSC08970.jpg http://i369.photobucket.com/albums/o...2/DSC08971.jpg http://i369.photobucket.com/albums/o...2/DSC08973.jpg And there is continuity in park. I tacked everything in place and checked with a meter before I weld everything up. http://i369.photobucket.com/albums/o...2/DSC08974.jpg |
Re: My 1965 build thread
NICE:metal:
|
Re: My 1965 build thread
nice work Alan!
|
Re: My 1965 build thread
I get it....sorry dude. I see whats up now; thats slick. Was the switch interfering with something? Your mount is clean too. My column installed by the PO has a cobbled up mount combined of the late(?) 70's column mount and the original. The column is also too short.
|
Re: My 1965 build thread
Quote:
Quote:
:thumbs:X2 Quote:
|
Re: My 1965 build thread
The slot on the inner cylinder wasnt registering to me. Probably because I havent torn apart a column before. I knew it worked mechanically.
|
Re: My 1965 build thread
Man I'm tired, just went through the whole thread again to find how you welded the rocker to the floor. I noticed you made holes in the new rocker. Did you use a spot weld bit? Every time I go through your thread I find something new I learned. This is like my third time I have gone through it.
Thank you. |
Re: My 1965 build thread
Alan,
The switch relocation looks slick. Good job.:metal: |
Re: My 1965 build thread
Quote:
And thanks for taken the time to share with us. |
Re: My 1965 build thread
Quote:
Quote:
Quote:
Quote:
Had a little time to shave the key hole and fill today. The pix are pretty much self explanatory. http://i369.photobucket.com/albums/o...d/DSC08975.jpg I made the cut with a thin cutoff wheel and cleaner up with a grinder. (It's aluminum) http://i369.photobucket.com/albums/o...d/DSC08978.jpg Put a piece of tape to plug the hole for the next step. http://i369.photobucket.com/albums/o...d/DSC08979.jpg This stuff is great for bonding panels and have used it in some other circumstances, so why not try it here. http://i369.photobucket.com/albums/o...d/DSC08980.jpg It is slow to dry. It needs at least 4 hours at 70 degrees, 24 to fully cure. Once cured it can be dressed down and maybe wiped with a thin coat of filler if needed. http://i369.photobucket.com/albums/o...d/DSC08981.jpg Finished welding and grinding. http://i369.photobucket.com/albums/o...d/DSC08982.jpg Went ahead and wiped it to clean it up a little more. http://i369.photobucket.com/albums/o...d/DSC08983.jpg |
Re: My 1965 build thread
lookin good:metal:
|
Re: My 1965 build thread
Quote:
Not a whole lot going on here, just enjoying the beautiful weather. As most know I picked up another truck for the hood. I've got the rest of the truck in the classified section with a choice of one of my other 2 hoods. I've kind of got out of the groove. Trying to get back in the saddle. I think we have all been there. You decide to take a day or 2 off then before you know it it is a week later. http://i369.photobucket.com/albums/o.../Photo0019.jpg |
Re: My 1965 build thread
Quote:
|
Re: My 1965 build thread
In my case... since september!
I did go stare at it for an hour yesterday... does that count?:lol: |
Re: My 1965 build thread
Alan, thanks for the in-depth photos and detail of what you’re doing. This effort will no doubt save many tears for a lot of folks later on and is a great example of why this forum is so important.
Mac. :chevy: |
Re: My 1965 build thread
Quote:
|
Re: My 1965 build thread
I hear you on the taking a break. Got cold her so I took a break for a month or two. Then right when I started getting excited it Snows for two days in the beginning of March. What gives?
|
Re: My 1965 build thread
Quote:
Quote:
Quote:
Quote:
Stayed tuned I'm fixin' to post some pix of what I got done today. |
All times are GMT -4. The time now is 09:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com