Re: Post your C/L - Facebook finds for everyone to enjoy!
 

52 Bus no engine or trans but it looks pretty solid for a short bus.

Near warden Wa that is east of Moses Lake and south of I 90.

https://www.facebook.com/marketplace...2111112l%22%7D

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

GMC sitting on Snomoa frame with a 4.3 It still needs a ton of work but the body doesn't look as bad as a lot of them. Yakima Wa.

I'd say that letting him keep one set of wheels or both sets might be a bargaining factor. https://www.facebook.com/marketplace...type=top_picks

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

A 50 with 51 doors at the Pasco auto auction 3/28/23 Says it is a non runner but it might be a chance at a fairly solid looking truck with a title for maybe under 3K. https://www.trucksandauto.com/auctio...vrolet-Pick-Up

They do charge a 200 buck paperwork processing fee along with their percentage and tax and title and registration.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

So if you can bid less than $200 and win, then it's a good deal.
$2k + %???
Won't even consider bidding there.:lol:

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

The 2K was my typo error last night. The current bid is 1850 and bid increasements on that one are 50.00 Meaning you would have to bid at least 1900 right now at 11:29 Pacific time 03/23/23

The 200 is their paperwork handling fee. Plus a 10 % buyers premium and tax and license.

I bought a VW Passat from them a few years ago on a hundred dollar bid and at that time I ended up paying 376 and change when I paid for it. Dang good 377 buck car that had a transmission leak causing the transmisison problems We even took it to Victoria BC for Deuce days in 2019. The outfit is great to deal with and stright arrow but their fees can cause a bit of shock.

I sent them an email about it having a later 235 last night and she got back to me this morning and said that the State Patrol said the vin was good but I suggested that she have one of her people physically check the engine serial number. It looks like a project that someone lost interest in or it is part of an estate sale.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

someone needs to jump on this suburban!

https://seattle.craigslist.org/sno/c...613726432.html
Attachment 2268233

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Looks like sold it already, At that price either someone slid sideways in his driveway cash in hand or he got so many calls that he deleted the add and is pondering his next move.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

50 GMC 150 with a 292 in it in Walla Walla Wa with a 7000 asking price.

A little rich for my wallet but it looks like a pretty solid truck.

If you are thinking about putting a late six in and AD the photos are worth saving.😊 Note that the GMC radiator sits an inch or more ahead of a Chevy radiator.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

There would have to be some really nice parts on it for it to be worth 2500 to me without a title but if it is a true Southern Idaho truck it might have them. I need to get rid of parts rather than buy them though.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

TF long box turned trailer on 3/4 ton chassis. In or near Ellensberg WA and this one isn't beat up. Pretty nice TF fenders except that they have that wraparound bumper thatfastens to the fenders. 400 asking price makes it worth taking a drive. https://www.facebook.com/marketplace...e_map%5C%22%3A[]%2C%5C%22grouping_info%5C%22%3Anull%7D%22%2C%22lightning_feed_qid%22%3A%22-4183920812980485721%22%2C%22lightning_feed_ranking_signature%22%3A%221851521703650263040%22%2C%22ftm d_400706%22%3A%22111112l%22%7D

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

A pretty solid looking 54 3600 in Beverly Wa, That is about 8 miles south of the Vantage bridge off I 90. https://www.facebook.com/marketplace...type=top_picks

Pictures are pretty dark because it is in a shed.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Auction truck in an online auciton that ends Saturday.

50 Chevy 3100 that is a running driving project, Current bid is 3100.
https://www.trucksandauto.com/auctio...et-3100-pickup

They are a solid outfit to deal with and I bought my wife's car through them a few years ago. Fees are a bit stiff though but they do process the title and you don't have to deal with that.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

51 with some mods that you either like or don't but it's hard to build a pretty well finished truck for the price. In Wenachee Wa. https://www.facebook.com/marketplace...2111112l%22%7D

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

The parts pickings might be rather slim on this one but he says he has a clear title and my bet is that after a few days it can be had for a lot less than 700 if you show up with cash greenies, a trailer and a couple of helpers. it may have to be loaded/hauled in pieces though. https://www.facebook.com/marketplace...2111112l%22%7D

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

I guess that one is really a low rider, in the weeds. Lol.
Yeah I know. I'm too funny. Haha.
boom, here all week.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Part of it might stay in the weeds when you picked it up. Bed and rear fenders don't look that terrible. The title might make it worth making an offer on for a guy in the PNW who has a whole bunch of parts on a half way built project and no title.

The trouble with it being in Poulsbo is that your wife isn't going to let you go to Poulsbo without her and that means spending a few hours down in the main part of town letting her snoop through the shops and then deciding where you want to go to eat. Some of the best donuts anywhere, Great coffee across the street from the donuts and a guy can always find plenty to do there too. It was my Aussie Harley's favorite town.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

This one is in Kansas and the auciton ends at about 10:30 AM kansas time 6/7/23 meaning tomorrow morning.

https://www.bigiron.com/Lots/1953Che...JgeCyFv1V5caWQ

Auction says that it is a 53 but the vin says it is a 48 6100 built in Norwood Ohio.

9RVJ1847
9 = Norwood Ohio
R = 1948 6100
V = 6100
J= October

1847 = 846th 48 off the line.

Twin Boom wrecker and it runs and drives. It has a GMC engine in it.

Maybe a typical wrecking yard mix and match of pieces from that but it has serious cool factor.

But a 1948 Chevy 6100 wrecker sure would be cool for Mr48 Chev if I had the money to bid and haul it.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

I know you'll hate hearing this, but at this price, and if the body's not rotted out, this might be a good candidate for a frame swap.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

That body is beyond rotted out. it would be a frame swap candidate as no doubt the frame looks worse than the body.

My issue with frame swaps is and always has been with the guys who buy a nice running truck with a really nice stock 3100 frame and rip the stock frame out to stick a worn out 300 K work truck chassis under it hoping to be one of the cool guys with an S-10 frame then they spend 1500 + on a kit to install it, spend 500 in rebuilding the worn out front end, spend another few hundred swapping the rear axle and half the time installing a4 link and bags. All because they think it is too hard to install a decent front suspension and rear suspension and axle under the original frame and end up with a far nicer truck.

I don't fuss about the guys who go out and buy a dead grain truck for the cab and scrap the big chassis and do a frame swap., That probably saved the cab from being hauled for scrap or rotting into the ground. A lot of those trucks got worked a couple of months a year for 20 or 30 years or until the engine blew up and then they got put out in the row with the rest of the dead and neglected equipment The farmer bought a newer bigger and more powerful truck to haul with. Those are prime frame swap cabs.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

That wrecker sold for 4150. I'd say someone got a bargain on that.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

6 lug, 4 nub steelies - $150 West Bend MI

https://www.facebook.com/commerce/li...are_attachment

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

57 big window partially converted to a 4x4 in a basket in LaGrande Oregon.
https://www.facebook.com/marketplace...2111112l%22%7D

It looks like it needs a roof panel plus a frame up rebuild but it is a 57 Big window short box with a title.

4500 isn't an outlandish price either.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

potential. for starters lose the stupid big tires or lift the truck so they fit under any circumstance.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

outside of what ever is going on with the roof that is an interesting truck.

The wheels, tires, axles and what not don't mean a whole lot unless you want to 4x4 it. Maybe he would drop the pice if he kept the 4x gear.

I'm just flat too old to take on another full project without the funds available to pay someone else to do the whole build. I've wanted a tri 5 big window since the 70's and never got my hands on one.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

I can't even imagine starting a build like that (or any similar project) at todays insane (and rising) high parts and labor prices. Gonna be tough to keep what i got right now.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

It may not beinmost of our wheelhouses but the money is out there for such projects. A friend of mine who has a shop that gains fame with every build is busy with builds that run up well over 100K along with the simpler jobs he does. His problem is finding skilled workers who can do work at the level that his shop demands.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

AD Front or rear fenders in Kennewick Wa. https://www.facebook.com/marketplace...2111112l%22%7D

The add says 150 each and some may be worth that.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

56 3100 in a basket in Richland Wa.
The 9K seems a bit stiff until you start studying the list of parts that come with it and then the numbers start adding up.
https://www.facebook.com/commerce/li...are_attachment

1956 Chevy 3100 Truck
$9,000 · In stock
Listed in Richland, WA
Details
Condition
Used - Good
1956 Chevy 3100 pickup. Have all the body parts for it. Was torn down for full rebuild. Frame has been grafted with a 1970’s Camaro front end. Have a 2016 196 and 6190 almost new transmission, stand-alone wire harness, programmed CU, new dirty dingo motor mounts, bigger throttlebody, new Is oil pan kit, new gas tank and fuel pump, new fuel lines and fittings for it. Have most of the parts for the front end suspension. No rear end. $9000 obo

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

Hot find of the day! FBMP 72 chevy camper truck with perfect looking buckets and console in Arizona. Sweet!
https://www.facebook.com/marketplace...2111112l%22%7D

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

man that is clean! Even with the back cut open like that I bet you could sell just the cab and fenders for the asking price up here in BC

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

That sold quick. The camper will take a total rebuild though.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

My Old Project Goldilocks is back up for sale in Northern CA for $10k. I sold it to the guy for $8k and made no money on it but I had fun!

https://www.facebook.com/marketplace...54677263009126

Looks like he added some incorrect 32 fender spears (its a short bed), and then parked it. He doesn't mention the power brakes with the vette master, new lines, the PCV conversion, new plugs and wires, rebuilt distributor, etc. that it took to get it running! I ended up leaving out the electric priming fuel pump and the HEI conversion and still have those parts.

He also forgot to mention it has FACTORY Limited Slip / Posi / Whatever you call it! Dana 45 Rear Axle. Heck if I knew he didn't care about that, I'd have found an axle to swap out hahaha!

I still think this would look so good as a coffee cruiser with just a camaro clip, axle flip, and a c notch. If I had room, I'd buy it back and do exactly that.

Re: Post your C/L - Facebook finds for everyone to enjoy!
 

My experience is that non truck, non custom or non hot rod guy who buy one because the cool guys have them and then tire of them or decide that they are too much work and effort don't understand that it is those little nitpicking details that make the difference to real car and truck guys.

Advertised with the feature that got his attention when he looked your add, the it has great patina when his buddies are all talking about cars or trucks with great patina. At least he didn't throw rat rod in to try and up the anty a bit more.