|
Re: SkinnyG's '61 Apache
Floor vents installed. Dome light and 3rd brake light wired. Heater motor wired. Wiper motor and pivots installed and working. Rear wires run through cab.
|
Re: SkinnyG's '61 Apache
I keep loving this truck more and more.
Hope you had a Merry Christmas, take care. Ronzo |
Re: SkinnyG's '61 Apache
love this color
|
Re: SkinnyG's '61 Apache
Prepping the vent windows. Waiting on glass setting tape to come in:
https://www.gwellwood.com/wordpress/...31-672x376.jpg |
Re: SkinnyG's '61 Apache
Installing the glass reminds me of how crappy the factory parts are, how crappy aftermarket parts are, how fragile paint is, how ham-fisted I am when assembling this truck, and how much less I'm caring about perfection as I complete every task. *sigh*
https://www.gwellwood.com/wordpress/...28-672x378.jpg |
Re: SkinnyG's '61 Apache
Looks perfect from here…can’t wait to see the grin you have when you drive it!
|
Re: SkinnyG's '61 Apache
https://www.gwellwood.com/wordpress/...39-378x672.jpg
Also, I disassembled the Jeep Cherokee front door stoppers and removed the rubber bush. I'm pleased with how wide the door swings, and do not believe there will be any crease-happy contact happening. |
Re: SkinnyG's '61 Apache
The truck will be great, the sum of the solutions will make it unique.
|
Re: SkinnyG's '61 Apache
The windows look great but your experience installing them scares me. I am ready ro install my door glass and I'm not looking forward to it. If mine come out as good as yours seem to be I'll be happy.
|
Re: SkinnyG's '61 Apache
The back glass was easy peasy.
The front glass was an experience. I foolishly followed the only "official supplier" made 60-63 c10 windshield youtube video. I should have searched "curved windshield" instead, and watched a slew of those. I -DO- have a trio of videos coming out (one starting Saturday) which go through the glass installs. With the windshield, biggest tip: you are gently "persuading" the glass in. Be freaking gentle. Windshield video is coming out Jan 14th. Door glass video Jan 21. I will post all of them here. When you do the door felts - squeeze the curved ends flat in a vice and cut off the felt, where the door felts need to squeeze behind the door channel. That's how the factory did it. |
Re: SkinnyG's '61 Apache
Quote:
|
Re: SkinnyG's '61 Apache
All my door and glass stuff is Precision
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
That is an awesome video. I have done a front window on my 1969 c10, that was a pain in the you know what, but I got it. Having the right tools, ya so worth it!! Nice job, love the truck.
Question though. You mentioned glass installation tape? What is that? |
Re: SkinnyG's '61 Apache
Glass Setting Tape is a roll of sticky/gooey? rubber-ish tape that fits between the glass and the frame (a'la vent windows) so the glass is cushionly "pinched" to stay in the frame.
They come in thicknesses - measure the gap, measure the glass, math, order. 25' roll did both my doors with a couple mistakes (door glass is fully framed, too). |
Re: SkinnyG's '61 Apache
Squish and shave the door felts like this. This is how the factory did it:
https://www.gwellwood.com/wordpress/...23-672x378.jpg I had previously made a fancy speaker holder that would angle a pair of 5-1/4" coax to hopefully improve the soundstage from a center-mount speaker. Sadly, it did not clear the heater controls, or the modifications I did to the ashtray to house the air ride gauges. Grrr. So.... flat panel it is. I had also added 6 more rows to fit the speakers better than the single opening was: https://www.gwellwood.com/wordpress/...13-672x378.jpg |
Re: SkinnyG's '61 Apache
Nice.
I like the videos. |
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
That is one heck of a build! very impressive skills my man.
|
Re: SkinnyG's '61 Apache
Fuel filler tube fabricated out of stainless. Tank inlet was 2" and the filler neck was 2-1/4." I had bought an exhaust reducer, but it really didn't fit well, so I hand-flared the 2" to match a 2-1/4" section I had laying around. Filler neck uses original (but new) rubber seal.
https://www.gwellwood.com/wordpress/...35-672x377.png https://www.gwellwood.com/wordpress/...21-672x378.jpg https://www.gwellwood.com/wordpress/...39-672x376.png And we have working headlights! https://www.gwellwood.com/wordpress/...33-672x376.png |
Re: SkinnyG's '61 Apache
Came out nice.
|
Re: SkinnyG's '61 Apache
Great videos and a fantastic truck is here
|
Re: SkinnyG's '61 Apache
|
Re: SkinnyG's '61 Apache
Air Ride gauges hidden in what used to be the ash tray:
https://www.gwellwood.com/wordpress/...56-672x378.jpg Plus two Viair 400's: https://www.gwellwood.com/wordpress/...18-672x378.jpg |
Re: SkinnyG's '61 Apache
Slow slow progress of late. Bed back on, bumper on, fenders got welting:
https://www.gwellwood.com/wordpress/...27-672x378.jpg |
Re: SkinnyG's '61 Apache
Progress....
:cool: |
Re: SkinnyG's '61 Apache
Taillights added, wheels on, aired out:
https://www.gwellwood.com/wordpress/...8s-672x378.png https://www.gwellwood.com/wordpress/...8s-672x378.png https://www.gwellwood.com/wordpress/...56-672x378.png |
Re: SkinnyG's '61 Apache
And to celebrate, I changed my Avatar.
|
Re: SkinnyG's '61 Apache
Wow!
|
Re: SkinnyG's '61 Apache
Quote:
dannnnnnnnnnnnng! that looks just about perfect! |
Re: SkinnyG's '61 Apache
Yes.
|
Re: SkinnyG's '61 Apache
Looks amazing!! Hope I get to see it in person some day!
|
Re: SkinnyG's '61 Apache
Looks awesome :metal:
|
Re: SkinnyG's '61 Apache
Absolutely fantastic. Can't wait to see some miles put on it
|
Re: SkinnyG's '61 Apache
Looks great!
|
Re: SkinnyG's '61 Apache
Looking good Skinny!!
|
Re: SkinnyG's '61 Apache
That's one awesome looking C10!
Rick |
Re: SkinnyG's '61 Apache
That looks great! Do you plan to do any sort of center/hub cap or just ride it how it sits? Either way, I dig it!
|
Re: SkinnyG's '61 Apache
I want Spider Caps, but they are $80 a piece, so I don't have any. Yet.
|
| All times are GMT -4. The time now is 01:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com