Re: Do you need '64-'66 Chevy Truck Parts?
 

That is what I have. That is the only 3-speed manual available in the '60-'66 light-duty Chevy trucks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

6-1/2', 8' and 9' stepside beds were available on all light-duty trucks from '60-'66.

Re: Do you need '64-'66 Chevy Truck Parts?
 

$25.00, including straps, bolts & pads and shipping.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know if I can help and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Grille mounting brackets, that attach to the grille and secure to the grille support & the headlight buckets attach to them? If so, yes. $40.00, including shipping. They are in good condition & all weld nuts are good.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know if I can help and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

$25.00, including nuts and shipping.

Re: Do you need '64-'66 Chevy Truck Parts?
 

How much for 1/2 ton rear cab mount bracket, bushing and hardware. I also need heater delete panels. Do you know if they are the same on a 63?

Re: Do you need '64-'66 Chevy Truck Parts?
 

creep:

Thanks for the inquiry. PM is on the way.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi I need a right side inner fender panel for a 60 to 66 chevy c-10

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ok sounds good. How much for that piece shipped to 94952?

Re: Do you need '64-'66 Chevy Truck Parts?
 

How about $60.00, including shipping, via UPS-Ground? I estimate the shipping to be $25.00-$28.00 from Kansas to CA.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know if I can help and thanks for the opportunity. Enjoy the evening.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. Good, used, rust-free, dent-free inner fenders are $150.00 per pair, plus $45.00 shipping, via UPS-Ground. A single inner fender is $85.00 each, plus $30.00 shipping, via UPS-Ground.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts and thanks for the opportunity. Enjoy the evening.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, do you have any 66 front fenders that are'nt rusted to pieces.;) Shipping to 83201? I need L and R. Thanks Dave

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, do you ever cut up hoods and sell parts of them? I just drilled out the spotwelds to take the front inner support out of my 1966 hood. If I had the small front corner part I could weld it in and have a perfect hood. It's a little crinkled and cancerous in that area.

Chop

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, we started talking about a 64 dash yesterday, just found your site and now that I know you have "inventory" I'm wondering if you have a complete wiring harness for a 64 C-10 Stepsid/ We're runing a 327 w/ Turbo 350. Looking forward to the dash photo. Jim

Re: Do you need '64-'66 Chevy Truck Parts?
 

I'm looking for a short fleetside to fit a 64 chevy. If you have anything email a price and pictures at:noelcarver@bellsouth.net

Re: Do you need '64-'66 Chevy Truck Parts?
 

Do you have the bracket and everything for fuel filter that was on right inside frame rail

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony , keep me in mind for a GOOD SET of front fenders, Thanks Again Bill

Re: Do you need '64-'66 Chevy Truck Parts?
 

okay, i need a 9' step side bed for a 64! what are the price quotes??

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Dave. Thanks for the inquiry. A good, used, rust-free, dent-free front fender is $200.00, plus shipping. A good, used front fender, that has the fender tail replaced, minus filler or primer, is $175.00, plus shipping.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Chop, thanks for the inquiry. Can you e-mail a of the area you need? If you mask it off and take a photo, I will check my hood shells, to determine if I have one, that is good where you need it and bad otherwise.

My e-mail address is: 4-5-6chevytrucks@sbcglobal.net

Thanks for the opportunity and I will reply accordingly.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning Jim and thanks for the inquiry. Are you running a factory gauge cluster or factory warning light cluster?

I have a brand new, factory-fit reproduction harness with the correct fuse block, wiring & terminations. It is still in the original package. It is $300.00, including shipping. I purchased this harness from www.lmctruck.com for $389.95 + tax a few years ago.

A good, used factory underdash harness is $200.00, including shipping. It is complete and in good condition.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I have a few swb fleetside beds, but shipping is cost prohibitive, since the bed has to be taken apart and shipped in five different packages, therefore, it costs around $300.00 to ship.

A good, used swb fleetside bed, including the bed sides, wheel tubs, front panel, tailgate & cross sills...minus the wood, wear strips, tail light assemblies, chains & wiring is $800.00, picked up at my shop in Kansas City, KS.

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I am not aware of the factory fuel filter, that was on the right inside frame rail. Do you have a photo or illustration of this? I have neither seen one, nor was I aware they existed. I am interested in seeing the set-up you are referencing.

Thanks for the opportunity and let me know if I can help.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Bill. I come across good, used front fenders, from time-to-time. A good, used, rust-free, dent-free pair is $400.00, plus shipping. A good, used front fender, that has had the fender tail repaired, minus skim-coating & primer is $175.00, plus shipping.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the reply. I have a pair of swb stepside bed sides and a pair of lwb stepside bed sides. I don't have any good fenders or '9 stepside bed sides, at this time.

Sorry I couldn't help, but please keep me in mind for your future '60-'66 Chevy/GMC truck parts needs and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

1960 shop manual page 10-54 fig.80 shows npicture i also have 1 on the 63 k-20 and one on my 1966 c-60 just didnt want to rob it off of 1 of those trucks they were factory

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks Tony, if you find a good used pair with no rust please let me know. Thanks Bill

Re: Do you need '64-'66 Chevy Truck Parts?
 

I am looking for a radiator holddown for my truck to replace the crafty diamond plate one the previous owner made. Here are a couple photos please let me know if you have one.

Thanks,
Derek

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony, I'm looking for a pair of 3/4 ton hubcaps, for a 1965 2WD pickup. What's the chance you have any? (was thinking because of your own camper special resto you might have two kicking around. Shoot me an e-mail at sgwcontract@hotmail.com. I'm up in Canada but have a postal box in Upper New York State 13669

Re: Do you need '64-'66 Chevy Truck Parts?
 

Derek:

Thanks for the inquiry. I sent you a PM regarding this item. Please let me know if I can help.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I have a few of them. Measure the inside & outside diameter of the caps you need, to ensure the ones I have will fit your wheels. If you don't have any to measure, I will measure mine and you can determine if they will fit.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Maybe it is a big truck deal. I have owned and parted over 50 '60-'66 Chevy/GMC trucks over the years and I have never seen this set-up, but I am learning every day, so I would like to know more about this assembly. Do you have a photo of the set-up or an illustration from the manual, that you can post?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Bill:

My inventory changes daily, so I may have some tomorrow...I never know. Needless to say, the good, rust-free, dent-free fenders and doors, don't stay around long, but I will keep you in mind and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I'm headed to Jamaica for a week but once I'm back I'll send you the measurements along with a picture of the two I already have on the truck to ensure what you have will match. I am excited to hear that you have some and the possibility of having a full set on my truck this year! Thanks!

Re: Do you need '64-'66 Chevy Truck Parts?
 

hi i need a few things for my 63 stepside. i need drivers side door glass, rearview mirror assembly, door handle inside, window crank handle, and i need a bench seat. thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

need a under the hood heatr box for a 65 c10

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I will send you a PM with information on all these items. Enjoy the day.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. Do you have a Deluxe-Air (3 levers on the dash) heater or a Thrift-Air (single pull knob) heater? Do you need the complete underhood heater box assembly, including the heater core? Fan blower motor? Fan squirrel cage? Please let me know what you need and I will reply accordingly. Thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the heads-up and congrats on going to Jamaica.

FYI, I also have a few complete sets of six lug and eight lug wheels, with and without hub cap clips, if you are interested.

Let me know when you return and I will try to help you with your factory painted dog dish hub caps for your C20.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Mt truck came from the factory with NOTHING. had to have been sold in the south!