![]() |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
I decided I needed some inner fenders so we dug out some old ones from my 67 pick up. I think with some cutting and patching we should be able to make these work.
|
Re: My suburban's Twisted Little Sister
Always something happening ehhh Dale.
Rain here. No progress on the truck yet, but the little Berlingo van is making me smile. |
Re: My suburban's Twisted Little Sister
Now that is interesting.. Like the way you are going
|
Re: My suburban's Twisted Little Sister
With your metal working skills this will be eazy~peezy.
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
Quote:
We spent most of the afternoon trying to center the front wheel. We decided that moving the fender forward 6 5/8" was about right. So we cut the back off a couple of old fenders. Next we'll clamp them in place and start welding. |
Re: My suburban's Twisted Little Sister
Wow you guys rock!!
|
Re: My suburban's Twisted Little Sister
Those fender extensions are gonna look great :metal:
|
Re: My suburban's Twisted Little Sister
Quote:
Quote:
|
Re: My suburban's Twisted Little Sister
Love it
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
Quote:
Quote:
Quote:
We got one of the fender extensions on. It turned out pretty good. We also fixed the panel alignment issues where the fenders meet the grille surround. |
Re: My suburban's Twisted Little Sister
Bravo, Nice, clean and straight. Perfect.
|
Re: My suburban's Twisted Little Sister
Bravo to the metal magician! :thumbs:
|
Re: My suburban's Twisted Little Sister
Very Very Impressive.
I guess a bit of practice does help. That looks like a no filler join. |
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
Quote:
We finished welding the second fender extension. Then we started making some brackets to mount the front sheetmetal. First two brackets with slots to mount the rad cradle. Then a bracket to weld to the inside of the fender and one to weld to the frame to attach the fender. |
Re: My suburban's Twisted Little Sister
Love the creativity. The fender came out looking good!
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
We spent some time mounting brackets. We tacked the rad cradle brackets to the frame. Then we tacked the lower fender bracket to the frame but the placement was off so we'll have to try again later. We also started fixing the rust on the fender tops (hood sides ) |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
We got the fender mounting brackets tacked in place and bolted the fenders on. We also finished one of the patches on fender tops and set it in position.
|
Re: My suburban's Twisted Little Sister
Looking good :metal:
|
Re: My suburban's Twisted Little Sister
I continue to see a Hotwheels special edition with the lines you have created here Dale.
Looking good team. |
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
Quote:
We continued working on the front sheetmetal today. To start we made some brackets to temporarily hold the front of the hood in position.This piece will become part of the grille surround. We then set the fender top on to check the placement. We found that the fender top needs to move forward 2 3/4 inches to align properly. We decided to cut a slice off a spare set of cowl extensions. That was as far as we got today we'll start tacking next time. |
Re: My suburban's Twisted Little Sister
3 Attachment(s)
We got some more of the welding done. Still a bunch more to do
|
Re: My suburban's Twisted Little Sister
Will the hood hinges be able to take the weight of the added Steel
|
Re: My suburban's Twisted Little Sister
1 Attachment(s)
Quote:
Just a small update since we've been doing a bunch of welding. We did make a 27" plywood wheel to figure out back spacing and clearance. |
Re: My suburban's Twisted Little Sister
Wooden wheel.....Yabba-Dabba Do!:lol:
|
Re: My suburban's Twisted Little Sister
Do you know of a shop to get it balanced?
|
All times are GMT -4. The time now is 04:12 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com