Re: Do you need '64-'66 Chevy Truck Parts?
 

DZL1:

Good morning and thanks for the inquiry. You have a PM regarding a 4-5-6 Chevy truck dash cluster with factory gauges. Thanks for the opportunity and please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Danny:

Good morning and thanks for the inquiry. There is a top hood latch and a bottom hood catch. Do you need the latch that attaches to the hood or the catch that attaches to the grille support? Please let me know, because I have both and I want to make sure I provide the parts you need.

I can rebuild your speedometer, which includes disassembly, lubrication, reset to 0000000, reassembly, new face graphics, new mile graphics and refinish the needle. This service, including return shipping, is $100.00.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck stuff in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I found an excellent driver side stepside fender, without the spare tire cut-out, while I was in Marina del Rey, CA, last week. I couldn't bring it on the flight back home with me, but I will have it shipped direct to you. I also have the passenger side stepside fender at my shop, so I will get that shipped to you, as well, along with the top rear shock mount.

Sorry for my delay and thanks for hanging in there with me on this.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

It's the upper latch in the hood I'm looking for and the $100 buck for a gauge cluster make-over sounds like a pretty good deal.

So how much for the latch..?

Thanks.
Danny

Re: Do you need '64-'66 Chevy Truck Parts?
 

The upper hood latch is $20.00, including shipping. The gauge clusters I do are not a complete refurbish, but I freshen them up pretty nice.

If you want to move forward with these items, I accept PayPal at:

4-5-6chevytrucks@sbcglobal.net

I also accept cashiers check or money order at the address in my signature. Please let me know if I can help you with these or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Looking for lower SBC SWP 2 groove pulley for my 283. You happen to have?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I sent you a PM regarding the factory 2 groove crank pulley for a 283 V8. Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

I just acquired a number of good, used door shells, front fenders, inner fenders, hoods, a very nice small back window cab and a number of other smaller parts. If you need any of these items or other good, used '60-'66 Chevy trucks parts, please let me know and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

good morning Tony!!! whats you price on a radio ant. 64-66 any pictures,is there just one style? thanks Morton

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey tony I'm looking for a reproduction parking light harness for a 66.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hello Tony,

Once again I am coming to you for a small, obscure part I can't find anywhere else.

I am looking for a Gravel Guard for a 1965 Step Side Pick Up. I need the one for the passenger side, but the Factory Assembly Manual list one part number for both sides, so I guess they are interchangeable. This is the cover that goes over the bumper brackets on the rear.

I have the one for the Driver's side, but the other one is missing.

Thanks !

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks Tony! I got the fenders and they were totally worth the wait!

Re: Do you need '64-'66 Chevy Truck Parts?
 

im looking for both fenders for my 66 GMC aswell as a driver side door. If you have anything shoot me a pm, thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Mort:

I have a few good, used factory radio antennae. As far as I know, there is only one style. It is $30.00, including the coax cable and shipping. Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I don't sell any new reproduction items, but a good, used park lamp harness for a '62-'66 Chevy truck is $20.00, including shipping. It includes the factory sockets and firewall plug.

Please let me know if I can help you with this item or other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning and thanks for the inquiry. I need to check my inventory for the stepside factory rock guards. I know I have a pair of fleetside factory rock guards, but they are different than the stepside style.

Thanks and I will let you know what I find.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Jason:

Good news...I am glad to hear you received them in good condition and you are happy with them.

Please let me know if I can help you with other good, used 4-5-6 Chevy truck parts in the future and thanks for your business.

Re: Do you need '64-'66 Chevy Truck Parts?
 

PM sent. Thanks for the opportunity and please let me know if I can help you with these items or other good, used 4-5-6 Chevy truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

hey would you happen to have a 64-66 gmc hood and grill?

Re: Do you need '64-'66 Chevy Truck Parts?
 

DO you happen to have a straight and rust free 63 Chevy C-10 hood? I am also looking for a gauge cluster with all gauges instead of idiot lights for the same 63. Thanks.

Re: Do you need '64-'66 Chevy Truck Parts?
 

OKduner:

I have nice 4-5-6 GMC hood and chrome grille assembly at my shop in Kansas City, KS. I will send you a PM. Thanks for the inquiry.

Re: Do you need '64-'66 Chevy Truck Parts?
 

darkhorse970:

I have a very good '63-'66 Chevy truck rust-free hood, as well as a nice factory dash gauge cluster. I will send you a PM and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hello Tony,

Did you get a chance to check if you had a passenger side, or driver's sider Gravel Deflector for a '65 Step Side rear bumper?

I am getting ready to place an order to Classic Parts for some rubber components and they have the Gravel Deflectors, but they are $39.95 per pair, and they only sell in pairs. I only need one, and would rather order from you, so please let me know.

Thanks!

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the follow-up. I did check my inventory for the factory stepside rock guards. I have a pair for a fleetside bed, however I do not have any for a stepside bed. Sorry I am not able to help you this item, but please let me know if I can help you with other good, used 4-5-6 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

how much for 65 hood with turn signals. good or better shape shipped to 60002.
how would u be shipping i live in residendial area? thanks jw
jwhite011@ameritech.net