Re: The '67 Burb Build Thread
thanks. and well, the easiest thing to do and what we did. was we basically just cut out the old one to get to the rivets on top... only thing wrong with this set up is it hits the floor so you are going to need to do some massaging of the floor area above it (can be seen in 1st and 2nd pic) we just used a trans jack to push up the floor to get it in their :lol: i will eventually do something for more clearance, if new body bushings wont fix the touching issue of it hitting the floor
|
Re: The '67 Burb Build Thread
Good call on the body bushings. Mine are definitely original and TOAST. I have the Energy Suspension ones here and ready to go, so I too will be curious if this eliminates the clearance issue or not. Thanks, as always, for the help!!!
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
haha thanks, and yes ALL bolts/nuts were tightened ;)
|
Re: The '67 Burb Build Thread
Bought some more small parts for the burb yesterday.... another tach (in dash mount), a lokar auto column shift linkage, a dimmer switch hippie foot pedal to match my gas pedal, and some 3" to 2.5" tapered exhaust reducers for when i redo the exhaust on it and my other truck
Posted via Mobile Device |
Re: The '67 Burb Build Thread
4 Attachment(s)
bought some stuff on ebay for the burb a little bit ago...
ammo "battery" box Attachment 1004440 Attachment 1004441 Attachment 1004442 and an M4 rifle "hood prop" :D Attachment 1004443 |
Re: The '67 Burb Build Thread
should also be pulling the trigger on some more porterbuilt parts in about another week or so, so stay tuned to here what i get lol :metal:
|
Re: The '67 Burb Build Thread
booyah! can't wait for it
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
haha nope, definitely cant :)
|
Re: The '67 Burb Build Thread
love your burb it makes me want one just a lil bit more, but i have to stick to my guns and finish my truck lol
|
Re: The '67 Burb Build Thread
Thanks, and yah i gotta do the same lol
Posted via Mobile Device |
Re: The '67 Burb Build Thread
5 Attachment(s)
fully functional M4 hood prop
Attachment 1016183 ammo can battery box Attachment 1016184 Attachment 1016185 nos bumper guards Attachment 1016186 Attachment 1016187 |
Re: The '67 Burb Build Thread
5 Attachment(s)
Attachment 1016188
Attachment 1016189 exhaust reducers Attachment 1016190 steel to start framing up a rear floor Attachment 1016191 gas tank removed Attachment 1016192 |
Re: The '67 Burb Build Thread
5 Attachment(s)
Attachment 1016194
making the mounts for the gas tank Attachment 1016195 Attachment 1016196 Attachment 1016197 Attachment 1016198 |
Re: The '67 Burb Build Thread
3 Attachment(s)
Attachment 1016200
gas tank installed Attachment 1016201 layed out in front of my sierra Attachment 1016202 |
Re: The '67 Burb Build Thread
2 Attachment(s)
from yesterday....
added a few extra pieces of square tube to box in the top and make it stronger Attachment 1018544 2.5- 1lb rolls of welding wire, 7.25- 6ft sticks of 1.25" square tube, a bunch of cutting & fitting, a bunch welding, and this how far i made it framing up a steel floor for the back of my suburban. need to get some more wire and steel when i come back home in 6-7 weeks so i can do some more of framing up of the floor lol Attachment 1018545 |
Re: The '67 Burb Build Thread
Looks good.
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Wow! Looking great!!!
|
Re: The '67 Burb Build Thread
Thanks guys :)
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Burbs lookin good. Hey your front setup? Is it cupped lowers, bags and drop spindles? Or did i miss something else. It sits nice and low. Thanks man.
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Thanks. And yes its cupped lower arms and 3" drop spindles. It lays the lower control arms on the ground lol. But i have some tubular upper and lower air ride tech arms that will be going on when i get the dropmember that i will probably be pulling the trigger to purchase this week :D
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Are you going with the new PB version by chance? If so, I can attest to it being AWESOME!!!
|
Re: The '67 Burb Build Thread
Yes i will be going with the new version of the "extreme" dropmember :D
Posted via Mobile Device |
Re: The '67 Burb Build Thread
Thanks man
Posted via Mobile Device |
All times are GMT -4. The time now is 02:50 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com