Re: Dutch '59 Fleetside Longbed
 

If you dump your exhaust under the truck you will get a drone more than a rumble and it will be louder.

Re: Dutch '59 Fleetside Longbed
 

You're hugely talented, Kees. Congrats!

Re: Dutch '59 Fleetside Longbed
 

Thanks Dan!!
I wouldn't say that myself....

Thank you Lower. I can live with a bit louder, but don't like the drone..

Re: Dutch '59 Fleetside Longbed
 

Busy sorting out airride on the Jag IRS.
Made some templates and had them laser cut.
All fits nice, now I can put the parts in the right model and bolt it together. Weld some brackets on the framerails and we're good to go :metal::lol:
I wish it was that easy....

On the front I saw a little rust hole where the springcup meets the IFS.
So to prevent any damage later on, I changed my plans. I'm gonna make an extra plate on the IFS and bolt a springplate to it. You see it when I come to that.
I'm now three days in the airride work and it almost goes to plan ;)

Pic#1- freshly cut parts, to be remodelled a bit...
Pic#2- had to cut a piece of the hubcarrier away to make room for the bag.

To be continued..

Re: Dutch '59 Fleetside Longbed
 

Re: Dutch '59 Fleetside Longbed
 

Thanks Mark!!
Hopefully I thought it out well and works like I intended to...
We'll see tomorrow.

Re: Dutch '59 Fleetside Longbed
 

Did you design the parts yourself?

Re: Dutch '59 Fleetside Longbed
 

Kees, like Mark said, super nice pieces...Jim

Re: Dutch '59 Fleetside Longbed
 

Yes sir, I did.
There aren't many who did a Jag IRS on airride. With all the pics I found on the internet, I decided to invent the wheel myself...let's see how it works...

Thank you Jim ;)

Re: Dutch '59 Fleetside Longbed
 

I started with some templates and went on from there.

We had the steel plates set at the angles we needed, drilled the holes for mounting first.
I have to bolt the pieces together because the the lower threaded bars are out of one piece, so I can't bent the plates over it.
The lower bag plate bolts to the vertical plates. I also made an extra angle from the bagplate to the sides. All plates are 1/4" thick.

Only thing to do for the rear is a mounting place for the shocks, that won't be such a problem I think.

(don't know why my all my pics are on there side...)

Pic #1 - the templates
Pic #2 - test fitting with airbag
Pic #3 - Extra angle piece from bagplate
Pic #4 - tack welded the upper plate on
Pic #5 - better view from the side

Re: Dutch '59 Fleetside Longbed
 

Also been busy on the front.

They all said front is easy!!! Take the springcup out and bolt in the bag...
Yeah right.....:smoke:

I took a special drill for the spotwelds, drilled out the spotwelds....but, I came across a little hole, that was rusted through.
So, I came up with a different idea to cut away a nice piece of subframe, and weld in a 1/4"plate at which I can bolt another 1/4"plate which at his turn holds the airspring. Problem solved :metal:
At first, again, made a template.
I made the upper plates with a grinder, drilled in the large holes and tackwelded it to the subframe.
I have to make the plates for the bags yet.

Pic #1, 2 - what I removed from the subframe
Pic #3 - Drilling the upper plates, Action shot :metal:
Pic #4 - Tackwelded the plate in. You can see that the holes are big enough
to bolt in the airbag later on its own plate.
Pic #5 - How I cut the plates...

Now I'm busy with the pics, I know why the pics are on its side, try to take better pics next time!

Re: Dutch '59 Fleetside Longbed
 

Kees, you don't let things stop you, you just take care of the problem. Nice job...Jim

Re: Dutch '59 Fleetside Longbed
 

Haha, That's right Jim!

I haven't sat still the last few weeks. I will show you in the next couple of posts...

I have got the airride in working order, but that's just on the ramp.
Didn't test it yet on the ground.
All the tests went well, it goes up and down, all four corners individually switched, two double needle gauges, compressor goes automatically on and off.

I'll show you some pics of the front first (excuse me, they are on their side again )
Pic #1 and #2, I welded in a 1/4" plate onto the subframe that was partly removed. I made the same plate for bolting the airbags to, so that I can unbolt them in the future when needed.
Pic #3 are the lower control arm plates. I removed the spring cups and welded in a flat 1/4" plate for mounting the bag.
Pic #4 is the complete assembly.

Re: Dutch '59 Fleetside Longbed
 

Let's talk swaybars....

I wanted the switch front swaybar to the back and make a new one from a Chevy Van up front.
This because of the difference in thickness. The front is 7/8" and the Chevy Van bar is 1 1/16".

First, I switch the front to the back, all went really well. Then I modified the Chevy Van front swaybar up front, but when bolt that to the chassis and the lower control arms, I didn't have enough wheelspace to steer...my bad....
So, I switched the swaybars again from back to front and vice versa, now it must work...I hope....

Pic #1: how the front swaybar mounted at the back. Looks great!
Pic #2: Here's the difference in width that I didn't thought off. Also the 3/8" plate that I used to make the swaybar arms of. You also can figure out why the steering didn't work with this Chevy bar up front...:lol:
Pic #3: How I make the rear swaybar arm fits to the Chevy Van part. The arms are about 5" longer as the stock Chevy parts.
Pic #4: Test fitting the rear swaybar.
Pic #5: The end result...

Re: Dutch '59 Fleetside Longbed
 

Nice job it should ride nice and flat like a race car.

Re: Dutch '59 Fleetside Longbed
 

Now the IRS.
It went smooth I think. Made some templates, had them laser cut and bolted them in.
Had to remove some material of the aluminium hubcarriers to make enough room for the airbags.
Also made some extra gussets for strenght and for bolting the shocks on and for the swaybar.
I think it is plenty strong now.

The pics, well, they're on their side again :lol:
Pic #1: The airbag at rideheight, you can also see how much material I removed from the hub carrier, it's normally one straight line to the top at the back. I my previous post you see that I added an extra gusset to the front plates for extra strenght. They are at both the front pieces, left and right.
Pic #2: I used the original Jaguar shockplates to weld the brackets on for shocks and swaybar.
Pic #3: Top shockmount, I's a 3/8" plate, bolted on the chassis with three 3/8" -8 grade bolts. The shock itself uses 1/2" bolts up and down.
Pic #4: View from behind.

Re: Dutch '59 Fleetside Longbed
 

Looks real good.
Kim

Re: Dutch '59 Fleetside Longbed
 

Kees, some nice work, but I have one question. Isn't the front sway bar suppose to be larger that the rear?...Jim

Re: Dutch '59 Fleetside Longbed
 

Nice work Kees. Very resourceful development...love it!

Re: Dutch '59 Fleetside Longbed
 

Hey Kees. A bunch of posts back when I saw the words air ride I knew that there were some interesting pictures coming up. I was not disappointed.
(even if some were sideways). Enjoying what I'm seeing. Good work there. Its always fun designing and fabricating something (like air ride with Jag suspension in a 1959 Chevy) and making it work.

Earl

Re: Dutch '59 Fleetside Longbed
 

Thanks guys for the kind words!!!
I have more pics to post ;)

Yes it is. A stiffer swaybar in the back gives more oversteer. That's why I wanted to switch bars, that didn't work out due to the width of the Chevy Van bar.
I kept the arms of this bar longer hoping it will soften enough.
But then, I don't know the rates of these swaybars, it's a matter of trial and error I think. But that's Hot Rodding I think, I'm not afraid to try new things out :lol:
We will see when we're driving again...

Re: Dutch '59 Fleetside Longbed
 

I have more to show..

The airtank, valves and compressor are all hidden under the bed.
I made a frame from stainless steel that fits right between the IRS and the gas tank, just behind the rear axle.
I made some aluminium plates to protect all this from too much water and dirt.
The plates are mounted on the front and sides of the frame and at the complete underside.
It's all removable for excess if needed. I'm gonna make a sort of a shutter in the bedfloor to be able to excess from above if there's something wrong.
I do all this because I just want nothing in the bed or in the cab.
All stainless steel welding is done by my buddy who has his own welding company, so all credits to him!!

Pic #1: testing the homemade Stainless Steel airtank, it's 3.1 gallons (12 liters)
Pic #2: Tank and compressor on the frame, valves fit in between
Pic #3: Valves mounted and airlines done. I also use two reducing valvalves for controlled deflating the airbags. Front and rear seperated.
Pic #4: Complete frame assembled and mounted under chassis.
Pic #5: the aluminium plates to protect from dirt

Re: Dutch '59 Fleetside Longbed
 

One more to show...

Remember my steering column around my header? As Kim said then, it looks like a snake :lol:
Well, it worked, but I have a small heavy point when I steer to the right.
The rubber blocks at the steering rack presses the rack to the left when I steer to the right, it then pushes too hard at the extra bearings in the column, that's why the heavy point in the steering.
So, to get rid of this, I have to re-route the column...or the header.
The only way to solve this little problem is to find another left header.
But after five different headers I know this is not going to be easy.

Thus we, buddy René, the welder, and me decided to make my own header.
I route the header and René welds it together, easy does it!!
After three hours of grinding and puzzling tubes, I tacked together a header.
The column goes through it, problem solved!! :metal:
René did all the TIG welding on the header.
I could use most parts of the old header and with some new tubes, the collecter is almost at its original place, job well done :lol::lol:

Pic #1: the old original header wit the old steering snake ;)
Pic #2: What I did grind of to make the new one.
Pic #3: The re-route of the new header
Pic #4 and 5: the end result

Re: Dutch '59 Fleetside Longbed
 

With the new airbags in place I have to make a new exhaust too.
There is simply no more room to put it back together as it was.
I now have to dump in front the rear axle, I hope that the drone will keep in limits...

The header is bolted to the block, steering shaft has now two joints, one upper at the column and one at the rack, that's the minimum :lol::lol:

Hope you can see how it is now:

Pic #1: seen from underside up
Pic #2 and 3: from above.
I have plenty of room for the shaft and header. It has to be good now...;)

Re: Dutch '59 Fleetside Longbed
 

Kees, all I'm going to say is WOW...Jim

Re: Dutch '59 Fleetside Longbed
 

Strong work

Nut case

Re: Dutch '59 Fleetside Longbed
 

Re: Dutch '59 Fleetside Longbed
 

Very nice work!! good thinking on how to solve the problems. As for your sway bar (thicker on rear) On my old lifted Jeep I put a Jeep front sway bar on the rear and I don't have one on the front. It's been that way for 20 years with no problems.

Re: Dutch '59 Fleetside Longbed
 

Thanks Jim, Nut Case and Mark!!

Thanks Lower! Good to know it worked out for you, gives me confidence it will work for me too.

Re: Dutch '59 Fleetside Longbed
 

I'm really late for this one but I'm in for a cool build.

Re: Dutch '59 Fleetside Longbed
 

Your never to late, Rusty!!
Welcome!

Re: Dutch '59 Fleetside Longbed
 

you are doing a great job. keep it up!

Re: Dutch '59 Fleetside Longbed
 

Nice going Kees, Aaron Kaufman's got nothing on you :)

Re: Dutch '59 Fleetside Longbed
 

Thanks Steve!
I just read that Aaron is going to produce old truck parts :metal:

Thanks mate!!

Last Monday I got out of the garage....
Man, it never drove so good!! :metal:
The steering, well, it's lighter than my wife's car :lol:
No heavy points, just put your pinky on that steeringwheel and it goes where you want it!

The airride is such a better suspension than the stock coilovers, I'm happy I did it :thumbs:
It's not laying frame, it was not intended to do so, it's pretty low aired out though.
It feel so much better now, also the homemade swaybar in the back is working like a charm!!
Man, it drives great!!

The exhaust, it's missing about 2,5 meters of 2,5 inch pipe now :lol:
I had it cut down to dump just before the rear axle, the mufflers are right under the seam of the cab/bed. Also kept the H-pipe.
Afterdriving it for a few miles now, it looks like it is even quieter than before, no drone, just a nice dark rumble, I'm happy with it.

Pic #1 and 2: the "new" exhaust
Pic #3: first time out, this is rideheight.

Re: Dutch '59 Fleetside Longbed
 

As all the airride stuff is under the bed, I decided to make it accessible from inside the bed.
I cut a hole in the floor :metal:
And ofcourse made a sort of door/shutter... You can hardly see it when its closed.

All the airbags are indepently switched, I use two double needle gauges for setting the ride height, and a switch for the compressor.
I made a panel under the existing gauge panel I had. Maybe I change that in the future...
For those who want to know pressures: front is at 125 Psi, rear is at 75 Psi, this at rideheight.

So, now on to test the heck out of it before we go to the Hot Rod Hayride in the U.K :metal:
That's a roadtrip of 600 miles for me, no problem!!

Pic #1: airmanagement in the middle of the dash. Maybe I change the whole dash in the future, not sure about this..
Pic #2: Grinding the steel bedstrips and saw a hole in the bedfloor.
Pic #3: The hole, and I came to the conclusion that I don't have a picture of the floor door..
You'll get that one later ;)
Pic #4: sideview at rideheight
Pic #5: sideview fully aired out. It looks not much in the pictures, but it drops about 4,5 inch.
When it's aired out (also by failure) I can move the truck without touching or scraping something on the ground.

Re: Dutch '59 Fleetside Longbed
 

Nice work Kees! Enjoy the Hotrod Hayride!

Re: Dutch '59 Fleetside Longbed
 

Looks great! I enjoyed reading through hour build.

Nik

Re: Dutch '59 Fleetside Longbed
 

Kees, nice work as always. Truck looks great at ride height and super aired out. Glad it's driving good for you, that's what I built mine for, to drive it...Jim

Re: Dutch '59 Fleetside Longbed
 

Looking forward to pics of your floor door . I have to do something to allow access to my fuel pump and battery under the bed floor.

Re: Dutch '59 Fleetside Longbed