Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

you might be able to turn the dually intoo a cartransporter , that would safe(r) from little rocks trown of the rearwheels , you might even use parts of the trailerchassis and fit that on the truckframe
http://www.dktrailers.com/000_0304.jpg

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

that would be cool !

Made some great progress last night ! I love how this Scott's front end is looking !!!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

gonna look good man...

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good there Mike....Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

From the auction? WHAT happened to the fenders?
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Is that pan hard going to work with such a huge travel? Im trying to get mine setup, and a panhard seems to move left and right a long way from up to down, so I think im going the Watts direction.

Other question, again with such travel, what did you set as your pinion angle with the 4 link??

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

looks great Mike!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Awesome progress, looking killer! Love the Pig too man, Vortec big block with a manual clutch!!! :metal:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Just need to paint it black like mine and drop it! then you will be like me. Lol..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks man !
thank you
it was a trade in at the carlot I work at, someone stole it and jack knifed the trailer into the sides
All the way dumped it moves 1/4 inch, I set the pinion at 3 degrees but it can be adjusted wherever we need it once I get the motor and trans all set up
thank you
love everything except the gas mileage ! LOL
LOL !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

slosh tubs is really coming up..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Why why why did you kill the pig? Touch up?
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Frame is looking good. The dually will work nice. Just bought f450 and we had no Idea there was a trailer behind her. The dually pulls so good. Really excited for you and the peg. Hope to see you at sema

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

LOL, thanks man
Kill it ???
Thanks man, wow f450 that is sweet , I am sure you will see us there we will look forward to meeting you !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Strip the whole nose? But it's already back together, rendering the question moot. Did you have a fresher clip or have that one painted? Sold the Cad yet?
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

how about these Hooker Titanium Ceramic coated LS manifolds ! Thank you Hooker !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

oh ok, I see ! the hood had bad hail damage and the front fender and drivers door were pretty messed up from being over extended ! Oh and no I haven't sold the Caddy yet

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

looking good....

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Sound great

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

finally getting the tops of the frame rails smoothed out ! I am really pumped about how smooth the rails are coming out I think they are going to be a great showcase for the Scott's IFS and the CPP brakes !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looked good
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Smooooth

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks great! Can't wait to see that with paint on it.:metal:

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Very nice!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks guys, we are trying to kick it into high gear now with only 6 months left until SEMA !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice! Paint? Powder?
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

frame will be body worked and painted the bolt on parts powder coated

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Nice progress, but you better get in high gear now...looking forward to the next step..

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Six months already? Sheesh!

Looks real good, Mike.

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

thanks guys, I hope to have it off the frame table by the end of this week

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looks great, full steam ahead....Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Lots of love yet to give her! It's looking pretty sick so far though! Is that just an optical illusion or is the sway bar tube at a different angle than the crossmember?

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I've just found this Thread and I've been sitting on the edge of my chair for the last hour and a half reading and looking at this Awesome build! I cant wait to see it completed and God knows I would love to be able to do all of this to my 72!
Awesome, Killa Work! My hat is off to you and Ill be Watching!

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Frames looking killer..
Posted via Mobile Device

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

I am, I am !
just an optical illusion
thanks man !
Thanks Kyle trying to hurry as much as possible so I can get her to you !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Last night I shaved the shock mounting bubbles

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

a big thank you to fellow board member BLK65K10 for Square Peg's new dash I briefly mocked it up last night .....LOVE IT ! Those Dakota Digital gauges and Painless Phantom ignition are going to look sweet in there !

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Looking good Mike, keep it going...Jim

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

seems to fit pretty good , does it have a covering over the top or is it solid steel ?
shouldnt matter mush you can fill the ectra with some styrofoam , foam in a spraycan , or simulair and have it covered in leather or vinyl , speaking of vinyl you might even be able to make the fill in pieces of 2 milimetre vinyl sheet with some heat and patience , might make it eazier to adhere the covering to the corners

Re: Slosh Tubz new company project "Square Peg" frame laying 1987 GMC Jimmy
 

Raising the bar again...you're an animal!