Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

if they do west coast, then i'll have to ship one of my vehicles. either the nova or the c10. 2010 will probably start in Tenn and head either for florida or probably texas or something.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Not yet. I've been taking pics as usual and looking for a good home for the build. I may start a project journal at hotrodders.com. The project is an odd-ball with no clearly defined home other than being what I would now put in the hot rod category. I'm open to any other suggestions.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

post a link if you do.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

It took me two days to read to the end of 45 pages (so far). Your imagination and skills are simply outstanding. I will continue to watch your progress until the end of this build (but they never really are finished are they?). I can only hope to have half the energy and inspiration that you do to someday finish my 69/72. Thank you for all of your hard work. :clap:

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Just wanted to say youve got a realy kool build going on hear lookin good

bob m

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

i just went though this entire build in one sitting, i was on the fence about a swb suburban but with all the little touches you put on this i absolutly love it

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

I am working on a 69 Chevy P/U and was needing to know the length of the driver door on your Suburban. If you can possibly respond with the dimensions i would greatly appreciate it. I called a few places like brothers trucks but they say they do not have that info. Also, I know the frame around the window is different from that of a P/U door. What is the angle between the horizontal line where the glass begins and the vertical line where the frame begins(part of frame that is closest to the b pillar). Thanks in advance!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Will do. There are a couple pics of it in Longhornman's roadtrip thread/album.

Man is that ever right! I don't think I know how to "finish" a project :lol: But I'll keep pluggin away as inspiration stikes :)

Thanks! That's a nice lookin truck in your avatar!

Thank you! More to come...

The burb doors are the same length as the truck doors. Window frames can be swapped between the two. Hope that helps.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Thanks a lot! You are certainly more help then some of the customer service people at some parts places. Where would you recommend getting some used Burb door frames? Thanks again!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

The parts board on this forum is a great place to find just about anything chevy truck related. You do have to subscribe to post a WTB but trust me that it's well worth it. Otherwise there's always craigslist, eBay, an the good ol classifieds.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

I have decided that i am going to make the suburban frame so can get practice out of it as well as save a little bit of money. The only thing that holds me from doing so are a few measurements. Is it possible if I get these measurements from you? I have attached a file hopefully it loads since im new to this site. A= measurement of top of door frame corner to corner. B= measurement inside edge of frame basically inside corner to inside corner. C= measure of the angle between the two parts. If you can reply with this info it would be greatly appreciated. Kinda sucks there are no burbs that i know nearby to get these measurements.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

your build is OFF THE HOOK!!! I do prototype US NAVAL aircraft modifications for a living, englishwheels and nearly every Fabrication process in the book, to include Kevlar, carbonfiber, fiberglass, foam,wood,ferrous,non-ferrous, precious and non-precious metals, acrylics, plastics etc, ect, your build is the most ambitious, creative, and interesting build i've seen to date on this forum. AWSOME is an understatement!! IMHO V/r Phipp13

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

This build is unbelieveable!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

just finally found them :jdp: wow that looks awesome... now i wanna get on my morris minor traveler. SBC going in mine, just want to order a frame from fatmans though.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

wow Friz!

i get back to the forum after all my surgeries and i get to catch up on all your success!

you truly are an honor, and a legend to our community!

hats off to you brother!

cheers!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Where were they? I looked through the Longhornman's road trip thread and just found pics of the wagon and the nice red swb. It must be a different thread.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

:agree:

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

The visit to Frizzle's starts at the end of post #5.

http://67-72chevytrucks.com/vboard/s...d.php?t=322870

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Ya, but you were prolly drinking heavily after a hectic day at work when you were looking for it. :lol:

Awesome Sunbeam Friz. :metal:
I wanna ride!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

ftfy

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Dang man. THANKS!!!!!!!

How could I have thought u would have waited until you got home?:haha::b69::barn::alky:

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

sorry i cheated... i searched for longhornman and found his photo album. missed the post but that's well worth reading :D

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

I'll get them for you if no one beats me to it.

That's quite a compliment, thanks. You job sounds like something I would love to do. I'm ex Air Force (F-16 Avionics) and I love aviation. Still build/fly RC. I would love to do prototype fabrication in aviation.
Thanks!
Those are cool as hell. Art Morrison will build a frame for anything too.
Glad you made it back! Hope your recovery is quick!
Those guys are the true legends in my book.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

thanks for posting the driftbeam link frizzy :D

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Yes, now I need to get a thread going somewhere so I can stop diluting this one ;)

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Oh come own now you know you like your view numbers going up with out ANY WORK on your part. Hey here's an idea why don't you get back to work and show us some progress! Yeah I know who am I to talk:lol:

Kevin
LFD Inc.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Awsome build FF!
Just got done reading the last 34 pages...Whewww! (Read the first 12 last night).

Never been much of a fan of Subs but Tubby is sweet! And your fab skills are unbelievable!

Questions;
What size wire ya use in the mig?
How long do ya wait from one spot weld to the next? (when you're finish welding the panel)

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

It's wrong isn't it? :lol:
Thanks man! .023 for sheet metal. I jump around doing multiple tacs until the whole seam is done. So one tac will not get another one placed next to it for at least 10 seconds. But truthfully I think with the .023 wire they can be done within a split second right next to each other without warpage as long as you watch the heat. Just don't run a long bead; especially on flatter areas.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Maybe, but I keep checking in when I get a notice :lol:

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Thank you for the info!

I'll have to get a spool of .023 next time I try body panels! That's what I used when I first got my mig and then switched to .030 for the heavier stuff that I work with most of the time.
Never give it a thought until I seen your spots. They look alot cleaner, (less grinding!) than mine did when I put cab corners on my 93.

Any updates on the Sunbeam? Unique little car! LOL Time frame for more on Tubby maybe?? Hahaha

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Gosh dang it! I keep checking this thread every time it gets bumped and NOTHIN' :lol:

That little blue thing is looking pretty sweet though! Glad to see you went manual with it too! You're going to have a unique ride with some great fuel mileage! I might have missed it, but are you going to do any paint/body on that or just roll in it as a sleeper?

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Sleeper (other than wheels, stance and exhaust note). No external body mods.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Works for me :metal:

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

it's pimp to me :aiiet: awww no updates yet :(

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

just writing to see if you were able to get those measurements for the suburban door.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Sorry bud. I dropped the ball on that one :o I see that you got them now.

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

aww no new drift beam porno pics ;)

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

no biggie.....just load some new photos, im pretty sure im not the only one hurting for a dose!

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

HAHA!!! i found your project on a different link!!!

http://forum.britishv8.org/read.php?12,5732,5746

Re: Joined the Short Wheelbase Club *69 Tahoe Project*
 

Looks like im gonna have to build me one already have the kleen burban to start with...Awesome work :gi: