Re: intro + 66 black bagged long fleet
well sorta.. ive got a 53 body that was all hacked up... so i cut from the firewall forward off, and cut of the top... planning on building a ratrod looking roadster thing on a s10 frame!!!
|
Re: intro + 66 black bagged long fleet
haha sounds like it will turn out pretty sweet. mine is pretty rusty body wise, but the pan is pretty good, not perfect (a little in battery tray area and up front where the body bolts to the pan on the underside of the napoleon hat area), but considering how rusty the body is ( all 4 wheel wells, front fire wall, heater channels, front spare tire well area, and a little in the door bottoms, and a few other small places) im really suprised the pan not just as bad lol.
|
Re: intro + 66 black bagged long fleet
small update... more pics in a lil bit
got the crossmember all trimmed up.. still need a few more bolts http://img101.imageshack.us/img101/8498/painted1.jpg here is the complete panhard bar http://img196.imageshack.us/img196/1940/painted2.jpg im in between coats on the frame.. so i will have some pics of it and the rest of the goodies in a lil bit... gonna reassemble it tomorow and put the bed on.. so stay tuned!!!!!!!!!!!!!!!! |
Re: intro + 66 black bagged long fleet
:metal: Can't Wait!! :metal:
|
Re: intro + 66 black bagged long fleet
lowering blocks and batt tray
http://img835.imageshack.us/img835/5706/painted3.jpg frame painted flatblack also.. kinda hard to tell from pic.. will get some day pics tomorow http://img703.imageshack.us/img703/6181/painted4.jpg here is my robot supervisor!!!!! spin his head and his titties spin lol http://img715.imageshack.us/img715/1852/painted5.jpg the rear end and control arms are painted too.. ill get some pics of them tomorrow to |
Re: intro + 66 black bagged long fleet
got alot done today!!!!
http://img856.imageshack.us/img856/4034/frame1.jpg http://img856.imageshack.us/img856/9467/frame2.jpg http://img17.imageshack.us/img17/4338/frame3x.jpg http://img836.imageshack.us/img836/2799/frame4.jpg http://img600.imageshack.us/img600/408/frame5.jpg http://img825.imageshack.us/img825/1305/frame6.jpg http://img59.imageshack.us/img59/8356/frame7.jpg http://img854.imageshack.us/img854/2880/frame8.jpg threw the bed on for a mock up.. gotta figure out how i wanna do the floor.. prolly gonna do the raised factory wood floor.. but im gonna put a hinge on the part in between the fenders so i can fold up the bed floor to show off my ish/easier to work on!!! http://img826.imageshack.us/img826/9585/frame9.jpg http://img849.imageshack.us/img849/2871/frame10.jpg aired out http://img269.imageshack.us/img269/8194/frame11q.jpg |
Re: intro + 66 black bagged long fleet
next step is to pull the motor and tranny.. then power wash the frame
then tear down for paint and cup my lower A arms so it will lay down in the front some more i took a vacation this week so i could get alot done.. im pretty close to having all the parts needed to put the motor in |
Re: intro + 66 black bagged long fleet
Looks real good, gonna look better with the ole BBC in er.
Posted via Mobile Device Posted via Mobile Device |
Re: intro + 66 black bagged long fleet
Nice work, bikes and shop. Keep the pics coming.
|
Re: intro + 66 black bagged long fleet
Your truck is looking bad@ass, man!
|
Re: intro + 66 black bagged long fleet
thanx man!!! ill be happy if it turns out half as cool as yours!!
|
Re: intro + 66 black bagged long fleet
Looking GOOD!!! Keep it up
|
Re: intro + 66 black bagged long fleet
got some more done today
hooked it up http://img600.imageshack.us/img600/7669/front1nm.jpg pulled it http://img825.imageshack.us/img825/3374/front2oe.jpg it came out!!! http://img541.imageshack.us/img541/361/front3p.jpg nasty http://img845.imageshack.us/img845/4158/front4.jpg pulled it out so i could get a real pic of this thing..lol it sucks having a skinny shop http://img30.imageshack.us/img30/9663/front5a.jpg man i cant wait to get that front down!!! http://img96.imageshack.us/img96/7793/front6q.jpg http://img204.imageshack.us/img204/2007/front7a.jpg soaking it down.. bout to pressure wash it.. gonna tear it down tomorrow for paint and to cup the lower a arms http://img200.imageshack.us/img200/8202/front8.jpg |
Re: intro + 66 black bagged long fleet
Looking good bro your gonna be driving that sucker by sunday at this rate.
Posted via Mobile Device |
Re: intro + 66 black bagged long fleet
This is a really sweet build man and I am super jealous of your garage! I would love to bag my suburban like that!
|
Re: intro + 66 black bagged long fleet
more updates
started on my lowers http://img41.imageshack.us/img41/5605/more1r.jpg http://img685.imageshack.us/img685/148/more2c.jpg http://img834.imageshack.us/img834/249/more3.jpg http://img263.imageshack.us/img263/1691/more4.jpg http://img38.imageshack.us/img38/7452/more5r.jpg almost done.. still gotta drill holes |
Re: intro + 66 black bagged long fleet
very nice; you're doing a great job! i really admire you guys who are so good at fabrication....keep up the good work
|
Re: intro + 66 black bagged long fleet
Seems like it would be much stronger if you welded it all the way around the top and on the inside, instead if the tabs. I think a lot strenght comes from tieing that box into the orginial arm. I know it's kinda hard to weld the inside. Just a thought.:smoke: Every time I look at your pictures I want a new camera.:mm: Never mind.:lol: I looked closer and it looks like you did weld it.Da :metal:
|
Re: intro + 66 black bagged long fleet
You may want to drill a hole in each corner of your cups to allow for water drainage.
|
Re: intro + 66 black bagged long fleet
ya its kinda hard to tell from the pic but it is welded on the inside to.. and im gonna drill the drainage holes when i drill the holes for the bag bolts... thanx for lookin out though guys!!!
|
Re: intro + 66 black bagged long fleet
more updates :metal::metal::metal:
finished painting everything http://img535.imageshack.us/img535/8896/done1g.jpg tucked away nice and neat i have about 1/4 inch clearance on all sides of the bags through the hole range of the control arm movement http://img641.imageshack.us/img641/3843/done2x.jpg http://img576.imageshack.us/img576/1125/done3c.jpg http://img202.imageshack.us/img202/3523/done5m.jpg http://img269.imageshack.us/img269/1786/done4o.jpg yaaa!!!! looking alot better http://img171.imageshack.us/img171/7116/done6.jpg http://img863.imageshack.us/img863/3103/done7.jpg air http://img195.imageshack.us/img195/7760/done8.jpg no air!!! http://img713.imageshack.us/img713/6061/done9.jpg doesnt get as low as the dropmember trucks.. but it does go higher!!!! thats a big plus living in Oklahoma with are crappy roads threw the front end on to c where i need to trim the fenderwells http://img714.imageshack.us/img714/5099/done10.jpg the more i look at this the more im thinking about not painting the engine bay.. i think it will look badass with a chromed out motor and nice painted frame against the nasty engine bay!!! http://img816.imageshack.us/img816/4148/done11.jpg the tires are lifting the front a lil bit... no bolts in the front.. its gonna come back off for me to trim and fill some holes on the firewall http://img855.imageshack.us/img855/7661/done12.jpg http://img832.imageshack.us/img832/3810/done13.jpg http://img42.imageshack.us/img42/6568/done14.jpg came this far might as well throw on the bumper and check it out... im thinking bout lowering the bumper bout an inch or so.. need to get the figure out whats gonna look best http://img193.imageshack.us/img193/4205/done15.jpg http://img339.imageshack.us/img339/5965/done16p.jpg http://img687.imageshack.us/img687/2558/done17.jpg http://img25.imageshack.us/img25/8136/done18.jpg stay tuned!!!! more ill **** coming soon!!! :metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::m etal::metal::metal::metal::metal::metal::metal: |
Re: intro + 66 black bagged long fleet
things to get one next:
pull bed off and do the frame work for the raised bed floor and make my adjustable solid bed mounts pull from clip back off to trim the fenderwells cut end of the frame off and lower it to lower the bumper shave a few holes in the firewall run my new brake lines and fuel line then reinstall the front clip shave down the tires to make the white walls bigger then it will be time to finish the motor |
Re: intro + 66 black bagged long fleet
Great job!Truck looks awesome!!
|
Re: intro + 66 black bagged long fleet
What are your Plans for the inline 6 that came out of it? Running non running?
|
Re: intro + 66 black bagged long fleet
that is siiiiiick! Can't wait to get mine on air!! :metal:
|
All times are GMT -4. The time now is 09:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com