Re: My '62 GMC Suburban is on it way !!
http://i45.tinypic.com/34ipt35.jpg
- Think these should be left out ... so all the crap drops to floor ?? - http://i45.tinypic.com/zje1y0.jpg - If the wifes arm looks twisted .... its because it took that to get here out her to help !!! ;):lol: - - http://i47.tinypic.com/dnbsqo.jpg - http://i45.tinypic.com/191mo4.jpg - http://i49.tinypic.com/15hehzo.jpg |
Re: My '62 GMC Suburban is on it way !!
http://i49.tinypic.com/axn3bm.jpg
- - http://i46.tinypic.com/2qcmteq.jpg - - This Aiwa cassette deck looked pretty corroded, but manage to power up and, even play a tape !! - - http://i50.tinypic.com/15x1rp.jpg - - http://i50.tinypic.com/a31k6h.jpg - - Here's a video clip of ghetto radio ... Sorry for the darkness .... :lol: - - |
Re: My '62 GMC Suburban is on it way !!
Looking good, I enjoy the teardown phase. I just wish it went back together as fast!
Still working on shipping rates, thought I had it nailed down (cheap too), but the shipping company (fedex freight), isn't sticking to what was quoted. :waah: I could pile the seats around the 283/PG and just ship one big ass pallet to ya...:lol::lol::lol: Enjoy the vacation!! |
Re: My '62 GMC Suburban is on it way !!
That was a great eye opener this morning. Watched/Listened to your Video. Brought a smile to my face.
Kudo's to the wife for helping out. |
Re: My '62 GMC Suburban is on it way !!
Quote:
Quote:
I think when I get back, Im gonna pull the crossmember from under the '63 C-20 and use it. I have 1/2 ton rubber bushing style a-arms pulled from wrecking yard. Also have all new bushings and 88-98 style BJ's to except spindles I have also. Gonna rework the lower a-arm to except newer BJ, and run a 6-lug rotor .... :metal: OK, gotta head to air-port ..... ALOHA !!!!!!!!!! |
Re: My '62 GMC Suburban is on it way !!
That C20 crossmember isn't going to work for you John. When you get back take a look at the LCA shafts and how they mount. I suppose you could always fab some saddles and weld them on, but I think getting them in the exact location would be a big PITA.
Have fun and see you in a week. :) |
Re: My '62 GMC Suburban is on it way !!
Quote:
This is first early chassis, but always read here that 63 and later crossmembers bolt up with some sort of "elongation" of holes or something ? Posted via Mobile Device FROM MAUI, HAWAI'I |
Re: My '62 GMC Suburban is on it way !!
The crossmember will bolt up to the frame, but there are no saddles for the round C10 LCA shafts. The '63-'66 C20 LCA shafts are flat and bolt to the crossmember with standard hex head bolts.
|
Re: My '62 GMC Suburban is on it way !!
Wait.....
Ur talking about the bushing cross shafts being larger than the c20 saddles .... Posted via Mobile Device |
Re: My '62 GMC Suburban is on it way !!
No. The '63-'66 C20 lower control arm cross shafts are flat, so there are no saddles on the crossmember. The C10 lower control arm cross shafts are round and require a saddle on the crossmember to locate them exactly where they need to be
Quote:
|
Re: My '62 GMC Suburban is on it way !!
Got it....remember now.
Is that all ? No prob ! ;) Posted via Mobile Device |
Re: My '62 GMC Suburban is on it way !!
Quote:
|
Re: My '62 GMC Suburban is on it way !!
Well, we flew in last night. Arrived back in CA (San Jose) at about 7:45. Pilot must of been in a hurry ... We actually arrived almost 45 min early.
The Maui airport is evidently a short one, because the pilot had to get on it before he even straightened it up on the runway ... thought he was gonna get a little sidewayz .... The wind at take off had the wife almost in tears ... All went well ... and we had a great time !!! Upon waking up this morning, I had my first present to open... Actually our dog, Jacob helped out with it. - - http://i49.tinypic.com/30jpkjc.jpg - One of CaptainFabs 60-62 booster mounts....Thanks again, Cap - http://i48.tinypic.com/1jsv8x.jpg |
Re: My '62 GMC Suburban is on it way !!
Today, nothing much was done, besides opening more can-o-worms ... :lol:
Notice the piles on the floor .... Looks like rockers officially need replacement, and well as floor crossmembers need replacement/patching ... :sumo: - http://i47.tinypic.com/261ccpg.jpg - http://i50.tinypic.com/33uael0.jpg - - After cutting out gas pedal screws, I removed the hump, exposing the 4-speed. Good thing, the driveline with front slip is present. - - http://i48.tinypic.com/2yybgnb.jpg - - Anyone need a good 4-speed ?? |
Re: My '62 GMC Suburban is on it way !!
Quote:
Play that Funky Music... Get down with your bad self!:lol: That'll get you in the mood... That's what I'm going to play in the shop!;) Gonna play that electified funky music, yeah Lay down the boogie and play that funky music And my friends laughed at me once when I put curb finders on my truck! The funk was in me that day!;) |
Re: '62 GMC Suburban is on it's way.....
Well, no music tonight ... the tape snapped !! :lol:
- - I moved around some junk in garage, and was able to retrieve the 292 in the corner. I have it up on the engine stand, ready for a cleaning, resealing and a detail. - - http://i50.tinypic.com/2m7uly0.jpg - - Those shinny things under the frame are called "jack stands" :lol: Man, once you get spoiled using a car lift, you forget how fun it was. My shop is only 45 min away from home, but its full at the moment....Also, I have a really crappy set of tool at home ... :smoke: - - http://i50.tinypic.com/2ug2t81.jpg - - http://i49.tinypic.com/eqchuq.jpg - - I got started on removing the rust fasteners holding the crossmember in place. This thing is gone, along with the low slung torsion bar crossmember. - - I FINALLY recieved my first order from TopBanana ... place the order while I was in Maui, and just arrived today. - - http://i48.tinypic.com/245f390.jpg - - http://i45.tinypic.com/2n9iydj.jpg - - I haven't tacked them in yet, but they seem to follow the door shape pretty well. You guys will be the first to know how they fit ... ;) - - http://i45.tinypic.com/vf3wi.jpg - - http://i49.tinypic.com/2w6v052.jpg - - Definately too shiny for this rig .... :gmc2: |
Re: '62 GMC Suburban is on it's way.....
You have that elusive pan that protects the front section of the engine between the rad and motormounts. Some trucks do most don't.
|
Re: '62 GMC Suburban is on it's way.....
I knew you, of all people, would comment on that.
It makes a great tool holder ! |
Re: '62 GMC Suburban is on it's way.....
Packages are always fun to open.
Pick and Pull Website shows they still have that 62 at the Modesto Yard. I dought you will find one better then this one. |
Re: '62 GMC Suburban is on it's way.....
I know ... Lack of $ is keeping me from that trip .... :waah:
|
Re: '62 GMC Suburban is on it's way.....
I know the feeling. :whine:
|
Re: '62 GMC Suburban is on it's way.....
I got a little more done on my "Rolling, Rust-toration, Patina Burb Build" :metal:
- - With some help from my buddy WD, I managed to get the front crossmember dropped.... - - http://i50.tinypic.com/10nweph.jpg - http://i49.tinypic.com/2qmhuue.jpg - http://i49.tinypic.com/1pfb7o.jpg - http://i47.tinypic.com/1zmp1tc.jpg - http://i45.tinypic.com/1zv8wnl.jpg - http://i45.tinypic.com/5zmma8.jpg - - |
Re: '62 GMC Suburban is on it's way.....
Moving on to the firewall clean up ....
- - Master gone: - http://i49.tinypic.com/357owmp.jpg - Heater removed: - http://i50.tinypic.com/2dujs3o.jpg - Found alot more 'washington' in the cowl ... - http://i46.tinypic.com/14tnw6.jpg - http://i47.tinypic.com/15eqzc.jpg - Crust everywhere .... - http://i50.tinypic.com/23ldyeu.jpg - |
Re: '62 GMC Suburban is on it's way.....
http://i46.tinypic.com/14mup2f.jpg
- Some cowl vent screws required converting the phillips head to flat .... - - http://i47.tinypic.com/313n2xj.jpg - - http://i47.tinypic.com/2h6edk5.jpg - - I used soapy water and an SOS pad to clean the firewall, and bring back the stock white paint .... Then used some CLR. - - http://i45.tinypic.com/2efn50m.jpg - - http://i50.tinypic.com/2h2h0ep.jpg - - http://i49.tinypic.com/nycxvm.jpg - - http://i48.tinypic.com/2v9bxxw.jpg - - http://i50.tinypic.com/20t1ovl.jpg - - |
Re: '62 GMC Suburban is on it's way.....
Managed a little more work this past weekend, not much.
- - Clean the frame a little, and have the 292 waiting its turn: - - http://i49.tinypic.com/29vbea9.jpg - http://i48.tinypic.com/294pcgj.jpg - http://i49.tinypic.com/2ia3dic.jpg - - |
All times are GMT -4. The time now is 02:26 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com