Re: 13" and 14" Corvette Brakes for C10's
I've got nothing in a 13" single piston sorry
|
Re: 13" and 14" Corvette Brakes for C10's
So what are the sliders in the first post, dual piston?
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
2 piston sliding or 6 piston fixed, correct?
Just looking for a good braking solution that if I decide to service brakes I can order parts on Monday and be doing them by Sunday without having to worry whether a single supplier has the parts in stock at the time. |
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Hi, Can this be used on the CPP Modular drop spindles? They are made for a bolt on bracket for the caliper. I need to keep my front end narrow for fender clearance. If so how much for the 13" 6 lug.
Thanks Tony |
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Did you ever come up with anything for the 2004-07 Cadillac CTSV Brembo caliper? (which is the same front and rear as the current Camaro is using) So much nicer than that sliding vette 2 piston.
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
The camaro calipers are the same as the Cadillac ones, right? Send me the address where they need to go and I will get it out this week.
|
Re: 13" and 14" Corvette Brakes for C10's
If you make the 2004-07 CTSV front 4 piston calipers work (which are the same as the Camaro SS) then the 2009-13 CTSV 6 pistion calipers will also work.
Only change is a larger (14mm) mounting bolt. The Cadillac uses a 14" rotor that is thicker than the corvette. I have a set of cadillac rotors if you need or want any measurements |
Re: 13" and 14" Corvette Brakes for C10's
Im sure youve answered this somewhere on here but what can you do for a 13 inch 6 lug set up? redrill the rotors i assume but what about the hubs?
|
Re: 13" and 14" Corvette Brakes for C10's
Do remember that it takes at least a 17" wheel and maybe even 18" to clear a 13" rotor and caliper, so if you are thinking 6 lug to still use stock wheels, that isn't going to happen. I have 13.5" Z51 Corvette brakes and they clear my 18s by not much more than 1/8th of an inch.
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
1 Attachment(s)
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
id like the cts/camaro set up if ever get it
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
Re: 13" and 14" Corvette Brakes for C10's
Could the bracket caliper mounting holes be moved out 1/2 inch. That should be enough run a 355mm rotor with a c6 2 piston caliper. Another company does it and calls it 355 hybrid kit for 4th gen f bodys. I think the rotor offset on 325mm and 355mm rotors are the same. Just a thought I have a set of zo6 wheels 18x9.5 so bigger brakes the better.
|
Re: 13" and 14" Corvette Brakes for C10's
Okay so how much would one of these kits cost me in a 6x5.5 complete and how much would it be if i buy the calipers in the 14" z06 style for the front of my 69 c10 thanks in advance, leo
|
Re: 13" and 14" Corvette Brakes for C10's
Quote:
In the long run it would be cheaper to just convert to the 5x4.75 bolt circle. |
Re: 13" and 14" Corvette Brakes for C10's
Quote:
|
All times are GMT -4. The time now is 02:32 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com