Re: '62 longbed going under the knife
1 Attachment(s)
Here is another shot of the repair above the windshield
|
Re: '62 longbed going under the knife
2 Attachment(s)
A couple of the back of the cab
|
Re: '62 longbed going under the knife
3 Attachment(s)
little rust repair on the door jam
|
Re: '62 longbed going under the knife
wow buddy, you have done a lot of repair! thanks for checking out my build
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
1 Attachment(s)
Spent some time with a wire wheel and the firewall this afternoon
|
Re: '62 longbed going under the knife
I used the flapwheel on my underside. Much nicer than having the wire wheel spitting needles at me. Got the same results and it does a bigger surface.
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
2 Attachment(s)
Starting to get the cab all cleaned up, a lot of sandpaper and wire wheeling
|
Re: '62 longbed going under the knife
1 Attachment(s)
Thanks to my friend mason for helping clean up all the cracks and corners
|
Re: '62 longbed going under the knife
1 Attachment(s)
Not much to do with the c10 but this afternoon my dad and I picked up this old Lincoln sp150 welder from my grandpas barn, thought it was a pretty cool score I love old stuff like this.
|
Re: '62 longbed going under the knife
2 Attachment(s)
A few shots of the inside of the cab
|
Re: '62 longbed going under the knife
On the firewall picture I see you added some metal around the top. Is that to smooth the firewall or to block of the vents?
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Cool. Did you use 16 or 14g steel on that?
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
Quote:
|
Re: '62 longbed going under the knife
2 Attachment(s)
More and more cleaning
|
Re: '62 longbed going under the knife
2 Attachment(s)
and more fun
|
Re: '62 longbed going under the knife
2 Attachment(s)
Anybody out there have any advice on the best way to this rust cleaned up between the floor and the back of the cab?
|
Re: '62 longbed going under the knife
2 Attachment(s)
Haven't had to many updates lately, schedule has been pretty crazy. But getting ready to get the 350 cleaned up.
|
Re: '62 longbed going under the knife
Hey, nice work! I can't help but notice your frame has no X. Is it a 62? Also what transmission are you using? I'm working on a 62 also and I'm going to have an issue fitting a 700r4 under the low hump cover. It looks like your retaining the cross member that used to support the original. Thx, Tony
|
All times are GMT -4. The time now is 11:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com