Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Pre-Christmas bump!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Bringing up for the new year!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Sparky
I have a 64 GMC with a 383 Stroker making about 525 HP hooked to a 700R4. Can you offer some recommendations and pricing for a replacement aluminum radiator shipped to Blaine , WA , 98230 Please let me know what other info you need. Thanks Rob Fisher |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
For that power range, I'd go with our radiator and the upgraded 16" Spal fan kit. The forum discounted prices are as follows:
Radiator: $425 Fan & Shroud Kit: $340 Controller with Relay: $75 Shipping $80 If that works, all we need is an email address to send the payment request and we can get started. |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Could you answer a couple of questions for me.
1. Would this be the down flow or the new cross flow that you have been working on. 2. Will the cross flow fit in the existing opening as the down flow or is there some fabrication that will need to be done. 3. Which would you recommend, is one better then the other 4. I am also going to need an overflow tank as well, can you let me know which one I should use and how much it is. 5. What type of fittings are there for the trans lines. are there options. Thanks for your help Rob |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
No problem.
1. downflow is what is available now. Crossflow, if you want to do the test fit, we can make it as a crossflow 2. it will be designed so that both fit in the same space, no mods required 3. crossflow allows a little longer in the tubes, which means more heat transfer, so a few degrees cooler 4. the standard cylinder is what most C10 guys order, those are $110 with discount and ship separately for $17 5. trans has two ports that are 1/4" NPT / MIP |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Sparky
Do you have a picture that you can send me a picture of what a cross flow will look like. If not for my truck but something similar. Thanks Rob |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Here is a crossflow that we make for the Nova, just so you have an idea of what it will look like (the tanks will be on the left and right instead of the downflow which has them on the top and bottom):
http://www.rndfabrication.com/images/Nova-V8-1.jpg |
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
back up again
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Thanks for the support guys, and remember we can accommodate any engine swap!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
back up again
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Is the cross flow available for the 63-66 C10 as of yet, and what would be the forum cost on those? Shipping to 98374?
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
It's on our to-do list, just haven't made it yet. After I knock out a few of these existing orders, I'll go ahead and make one. Shipping up there for just the radiator is $75. Let me know if you'd like to order.
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Appreciate the response. Is it going to be the same cost of $425 for forum members, or is it coming in at a different cost?
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
It will be the same cost!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
back up again!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
be sure to ask for your discount when ordering!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
back up!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
bringing around again. We've been slammed for the last few months and are just getting over the hump. Feel free to call, email or PM!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
1 Attachment(s)
Thanks again Sparky. Here is a pic of it installed in my 65.
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Looks good!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
Hope everyone has a great Memorial Day weekend, and remembers those that sacrificed for us!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
let us help keep your truck cool!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
back up top!
|
Re: RnD Fabrication 1963-1966 Chevrolet & GMC C10 / C20 Aluminum Radiators!
bringing up again!
|
All times are GMT -4. The time now is 07:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com