Re: 53 Surburban "Family Truckster"
This weekend I worked on cutting out the old floors. I also removed more of the factory crap from the front of the frame. It is starting to take shape. My scrap metal pile has really grown.
http://i79.photobucket.com/albums/j1...ps93673876.jpg http://i79.photobucket.com/albums/j1...psf9a4d7f3.jpg http://i79.photobucket.com/albums/j1...psf6c6a4c8.jpg I will start working on the floor pans once I get the metal cleaned up a little more. Marc |
Re: 53 Surburban "Family Truckster"
Moving right along...Jim
|
Re: 53 Surburban "Family Truckster"
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
Marc, nice work man, cleaning and stripping it down is work in itself. My friend is posting his panel build today, I believe he hoisted his cab up from the rafters. Dunno if that is an option for you or not.
|
Re: 53 Surburban "Family Truckster"
Quote:
I will keep an eye out for your buddies panel. Marc |
Re: 53 Surburban "Family Truckster"
I am sure glad I'm done stripping mine down, definitely the worst part of building these old things. Everything else is a blast after that.
Looking great, keep it up. |
Re: 53 Surburban "Family Truckster"
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
1 Attachment(s)
what i did on mine is jacked the front up and put a 4x4 under it with cinder blocks at each end.then moved to the back.took the wheels off and pulled the frame out with a couple jacks.worked pretty good.good luck.
|
Re: 53 Surburban "Family Truckster"
Thanks Chizzer. I'm toying around with building a body cart so that I can move it around in the garage. The only problem is I also want to be able to remove the wood floor which might be an issue using the body cart. You removed your wood floor didn't you? How difficult was it? I think that the advise I got was don't mess with it. But that might have been if you were trying to remove it with the body still on the frame.
Marc |
Re: 53 Surburban "Family Truckster"
youngrodder, working on the trucks is so much easier. They are so much lighter and easier to move around once off the frame. Keep up the great job.
Shannon |
Re: 53 Surburban "Family Truckster"
Quote:
I hear ya but easier isn't nearly as much fun. Plus you forgot to mention that they make ALOT more repo parts than they do for panels and suburbans. Marc |
Re: 53 Surburban "Family Truckster"
Looking good Youngrodder... I seem to be doing a lot of rust repair myself. I don't mind making panels, or welding them in, but drilling spot welds and air hammering just isn't my idea of fun!
If your burb turns out anywhere near as nice as your other truck, it's gonna be killer! |
Re: 53 Surburban "Family Truckster"
4 Attachment(s)
we removed all the wood and replaced it with 18 gauge. we used 1x1 box for all the cross bracing. i used summit mini tubs in the back and cut them in half. once the c-notches were in place we made a 1 piece cover for it and welded it all in. maybe these pics will help.
|
Re: 53 Surburban "Family Truckster"
Quote:
In the end I want the 53 to be an unltra low family cruiser. Somthing that I can drive and park anywhere. Marc |
Re: 53 Surburban "Family Truckster"
Quote:
Was the wood difficult to remove? Probably not because it looks like you removed it in sections. I would try to keep it intack (one piece) when I remove it so that I can use it for a template for the replacement wood. I do like how nice the bed coating looks sprayed all over the floors. That baby is sealed up. You should be good with preserving rusy for the next 60 yrs... ha ha Marc |
Re: 53 Surburban "Family Truckster"
nice pics chizzler, looks great. If it were me, I'm so paranoid and hate not having a lift, I like accessing anything I can. I'd make the panels removable if possible, but thats me. in my truck, I can slide the whole bed wood out in one unit, has already made my life easy. wish I could do a burb, I think someday I will. I located one close to me and has been the only one in four years that I'v found around me. Though, I think I'd do a COE bf the burb, thats def on my radar.
|
Re: 53 Surburban "Family Truckster"
i do like wood beds also.i think a 6" plank tongue and groove mahogany would be cool.
|
Re: 53 Surburban "Family Truckster"
Nice progress! Can't wait to see how this one turns out.
|
Re: 53 Surburban "Family Truckster"
Man, great work on the floor!
|
Re: 53 Surburban "Family Truckster"
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
I picked up some 16g metal for my floor pans. I also bought some 1 x 2 square tube for some under the floor bracing. Before I can weld the floor in I needed to repair the seat riser since this part is not remanufactured.
Here are a few pics to show how the seat riser was eaten away by rust at the bottom. http://i79.photobucket.com/albums/j1...ps74c3c2b0.jpg http://i79.photobucket.com/albums/j1...ps5744688f.jpg After spending a few hours on it the last two days here is the repaired seat riser. I'm happy with how it turned out. Keep in mind that I will sand blast this prior to rewelding it on. http://i79.photobucket.com/albums/j1...ps4f3ae49d.jpg http://i79.photobucket.com/albums/j1...psdd399a10.jpg http://i79.photobucket.com/albums/j1...ps43e8090a.jpg I might get some more garage time tomorrow and with it being in the 40's (warm front) I might get started on creating my floor pan templates out of cardboard. Marc |
Re: 53 Surburban "Family Truckster"
nice work, yeah tomorrow is suppose to be like 37 around my parts, then right back to the teens. gotta love the extra garage time on holidays.
|
Re: 53 Surburban "Family Truckster"
Looks good...Jim
|
Re: 53 Surburban "Family Truckster"
Quote:
Quote:
Marc |
Re: 53 Surburban "Family Truckster"
How did I miss this!?!?! Good score and I like the progress. You will love the burb, mines been feeling neglected lately with the 65 taking up my time. Following you along as I plan on a body off once the 65 is completed. I like your porterbuilt plans too! Are you doing a tall notch like Chizzler or keeping it under the floor?
|
All times are GMT -4. The time now is 11:42 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com