Re: 1962 chevy c10 update.
Thought I would post some pics of the 62 today. I have been doing body work on the cab and it is taking a little while to get it straight. I am on my third coat of primer. Soon as i get the bed right I will send it off to paint. I removed the bed angle strips and there is rust under where they were. I guess if I have them blasted it will be ok. If someone had the same problem please let me know.
http://img.photobucket.com/albums/v3...n/IMG_8978.jpg http://img.photobucket.com/albums/v3...n/IMG_8976.jpg http://img.photobucket.com/albums/v3...n/IMG_8977.jpg http://img.photobucket.com/albums/v3...n/IMG_8975.jpg http://img.photobucket.com/albums/v3...n/IMG_8974.jpg http://img.photobucket.com/albums/v3...n/IMG_8979.jpg http://img.photobucket.com/albums/v3...n/IMG_8982.jpg http://img.photobucket.com/albums/v3...n/IMG_8981.jpg http://img.photobucket.com/albums/v3...n/IMG_8980.jpg |
Re: 1962 chevy c10 update.
Progress is slow right now. I have been real busy at work and when I get home i don't feel like doing anything. The heat is not helping. Yesterday i removed the doors again to sand and prime the jams. I also had to sand and prime the inner doors. i didn't do it when I had them off before. I also seamed sealed the roof. I hate the way it turned out. i have that stuff all over the roof. I don't know why I didn't use tape to get perfect lines. It looks ok but I see the flaws. I guess it is good it is on top. I tried to get my bed blasted last week but the blaster was closed. For some reason I am real close to getting the body work done but I just can't complete it. My wife says I am too picky. It also scored me a free tailgate! It pays to be nice to people! Here is some shots of the jams and inner door.
http://img.photobucket.com/albums/v3...n/DSC00283.jpg http://img.photobucket.com/albums/v3...n/DSC00282.jpg http://img.photobucket.com/albums/v3...n/DSC00281.jpg |
Re: 1962 chevy c10 update.
Finally laid some paint down. I sprayed the roof and the front grill support. I can't seem to find a good place to by paint. I went and priced some today and he wanted $130 for a quart. I looked a summit and they have the color (Boss Blue) and the price for what I am looking for but they wont send it to Texas. Where is a good place to get Brigade Blue?
http://img.photobucket.com/albums/v3...n/DSC00287.jpg http://img.photobucket.com/albums/v3...n/DSC00288.jpg http://img.photobucket.com/albums/v3...n/DSC00292.jpg This is what I am going for. http://img.photobucket.com/albums/v3...8at33604PM.png |
Re: 1962 chevy c10 update.
Looking Good Billy Ray! Thanks for the updates
http://content9.flixster.com/questio...631943_std.jpg |
Re: 1962 chevy c10 update.
Thanks, I still have to color sand it. I used Dupli-color Paint shop.
|
Re: 1962 chevy c10 update.
Finished the front today. Now i have the semi-gloss black and the white surround. I am getting closer to final paint.
http://img.photobucket.com/albums/v3...n/DSC00303.jpg http://img.photobucket.com/albums/v3...n/DSC00304.jpg |
Re: 1962 chevy c10 update.
It is looking good...keep up the excellent job that you are doing. I don't know where you could find cheaper paint, but my advice would be to call all of the paint suppliers in your area and get pricing. A lot of places can't ship it due to haz-mat laws and shipping....Good luck and keep the updates coming...
|
Re: 1962 chevy c10 update.
Awesome work man, I'm just starting the bodywork... Heat has been ridiculous here as well...
|
Re: 1962 chevy c10 update.
Progress is real slow right now. Work is keeping me there late every night and i don't feel like working on the truck. This weekend I finally was able to paint the grill. I thought I would have it done fast but it took longer than expected. I also sent the bed out for blasting. I will get it back this week and hopefully I will weld in the angle strips and get it ready for paint. I had a dead line for September but i don't see that happening.
Before. http://img.photobucket.com/albums/v3...n/DSC00305.jpg After. http://img.photobucket.com/albums/v3...n/DSC00306.jpg |
Re: 1962 chevy c10 update.
Grill looks great! Nice work:metal:
|
Re: 1962 chevy c10 update.
Picked up my bed from the blaster Friday. Man does it look better. I also got my pain it so I thought I would jam the truck. I like the look so i went ahead and painted the whole front end. it has some striping because I ran out of paint so I will need to put two more coats on it. I started on the bed by welding in the bed angle strips and filling the rust pits. The truck looks so much better with the color on.
http://img.photobucket.com/albums/v3...n/DSC00324.jpg http://img.photobucket.com/albums/v3...n/DSC00327.jpg http://img.photobucket.com/albums/v3...n/DSC00325.jpg http://img.photobucket.com/albums/v3...n/DSC00330.jpg http://img.photobucket.com/albums/v3...n/DSC00331.jpg http://img.photobucket.com/albums/v3...n/DSC00326.jpg |
Re: 1962 chevy c10 update.
:metal:
|
Re: 1962 chevy c10 update.
Nice work.
subscribing to your thread. |
Re: 1962 chevy c10 update.
I need to order more paint. I only had a quart and it covered most of the truck. I have about 1/4 left but not enough hardener. The paint lays down good and I only had three runs which I need to sand out and re paint. It comes out more satin than flat.
|
Re: 1962 chevy c10 update.
Did some painting last week. I got a gallon of blue in and tried to get the color right. This Hotrod flatz is hard to get the streaks out and even. I think it looks ok when it is even. It came out a little more semi gloss than flat. I had over half a gallon left but it all dried up so i have to order more paint to finish the bed. I hope that I can get the body work finished on the sides this weekend. Here is some new pics.
http://img.photobucket.com/albums/v3...psdc493152.jpg http://img.photobucket.com/albums/v3...ps9db58446.jpg http://img.photobucket.com/albums/v3...pse8412aeb.jpg http://img.photobucket.com/albums/v3...psf352fce2.jpg |
Re: 1962 chevy c10 update.
Looks very good! Can't wait to see what the bed will look like.
|
Re: 1962 chevy c10 update.
I like the look of the satin finish. nice job.cooler weather should be just around the corner.
|
Re: 1962 chevy c10 update.
Did it ever cool down there in Texas for you to post an update?
Been missing out on your build here !!! |
Re: 1962 chevy c10 update.
Quote:
|
Re: 1962 chevy c10 update.
We have 46F here in Cambridge, how deep is the snow up there Mcmurph:lol:
Liking your 62 there barnfind! |
Re: 1962 chevy c10 update.
Quote:
|
Re: 1962 chevy c10 update.
Quote:
|
Re: 1962 chevy c10 update.
Here is a new update. I have been in the field conducting live fire exercises so I haven't had much time to work on my 62. While I was gone my wife had the front and rear glass installed. I had them both installed for $220.00. I thought it was a good price since they are going for $300 plus. I still have my bed to work on and my interior. I am leaning on finishing my glass and interior first so I can mount my gas tank and move it on its own power. Should I finish the interior or the bed first? Right now I am still pushing it. I am real happy that my wife surprised me with the glass install when I got home for the weekend.
http://img.photobucket.com/albums/v3...n/DSC00333.jpg http://img.photobucket.com/albums/v3...n/DSC00332.jpg |
Re: 1962 chevy c10 update.
Quote:
If you ever seen that movie "Mystery Alaska" it is not too far off the mark for what life up here is like in the winter time..... Good movie too by the way. One definate challenge is painting. It will lay down nice enough, but if it is masked off, and is a gloss paint the paint will peel up and off with the masking; if it is a flat paint, then the tape glue will stick to the surface of the masked area. Adapt and over come eh? Barnfind, I been dinking around with little projects as well, but needed in order to get my cab into the final stages so I can Herculiner the floor, and start wiring it back up for the electrical. |
Re: 1962 chevy c10 update.
This weekend had good weather in Central Texas. In the upper 70s and lower 80s. I have been in the field support gunnery for 30 days so I hadn't had much time to work on the truck. Saturday I went outside and said I will put the bed together and Sunday I accomplished the mission. I worked the sides and put the fenders on to start blocking. I kept hitting them and causing more damage when they were on the floor. It is starting to look like a truck again.
http://img.photobucket.com/albums/v3...5b9ff0c61.jpeg http://img.photobucket.com/albums/v3...3c77d240c.jpeg http://img.photobucket.com/albums/v3...94e57be90.jpeg http://img.photobucket.com/albums/v3...4d1e44f5f.jpeg |
All times are GMT -4. The time now is 05:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com