Re: What did you do with your truck today, take 2
2 Attachment(s)
Installed a new seat cover!;)
|
Re: What did you do with your truck today, take 2
Put it to bed for winter so the DD can go in the garage, I hate scraping ice off the windows.
|
Re: What did you do with your truck today, take 2
Fired up the old inline 6 for the first time in probably 6-8 months. Kinda feel a little bad swapping it out for 5.3...
|
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
Quote:
With that being said, because its still a running motor, i'm not going to junk it. will either try to find it a good home or try to convince the wife to let me use it in a roadster project...or for another truck project. My 10 year old daughter is hinting she wants one. If she can't have a 70 monte carlo like her mom used to have. To many ideas... |
Re: What did you do with your truck today, take 2
Well, it thawed the snow.
Then, it rained and washed the salt away. So, I went for a 60-mile cruise. Awesome day! Then it snowed, again. |
Re: What did you do with your truck today, take 2
I managed to pick up some tires this week. Once they're mounted the truck can be driven again. Then it's back to computer tuning that was interrupted two years ago. :(
|
Re: What did you do with your truck today, take 2
Quote:
Do you remember how much material you cut out of the Impala dash? I've been considering the same modification :D |
Re: What did you do with your truck today, take 2
Quote:
Be sure to post some pic's of your install! |
Re: What did you do with your truck today, take 2
1950 3600 w/4 inch dropped 1/2t axle (sids), 1958 1/2t rear end and a purring 'lil 283ci and granny 4 speed. Pulled the tarp off her, filled all the tires with air, dropped a battery in her then squirted some gas in the carb. Had my 14yo son twist the key and she came to life!! He's never experienced the joy of of a standard let alone a standard in a good 'ol truck. So, I let him drive it around the yard (making sure he didn't run into the '51 or '52 3100's). He did great! He only killed it once and that was because he started off in third. All in all a good day and I think I've just created another " 'ol truck junkie". LOL
|
Re: What did you do with your truck today, take 2
3 Attachment(s)
Finished Camaro clip install and put coat of primer on it.
|
Re: What did you do with your truck today, take 2
nice job!
|
Re: What did you do with your truck today, take 2
Did some more work on the center console.
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Welded inner drivers side cab corner today.
|
Re: What did you do with your truck today, take 2
5 Attachment(s)
Well I really did this yesterday, but didn't have time to post until today. Yesterday was a beautiful day at 70 so I took the pickup out for a drive. Drove about 50 miles thru some up and down ozark hills, curved back roads and had a great time. Here's a couple pics...Jim
|
Re: What did you do with your truck today, take 2
Beautiful scenery there, looks like it was a perfect day for a ride.
|
Re: What did you do with your truck today, take 2
Fixed my heat control cable, installed my Newport wiper setup and the Retro-Sound radio while I was under the dash. My dash is full underneath so I hope I never need to do any repair to the wiper motor. I bought the radio and wipers a year ago but haven't been in the mood to install them before now. Someone had hacked the dash around the radio mounting holes so that's the reason for the black circles around the knobs. I turned some covers on the lathe that cover the damage. Wish I had repaired the dash when I first got the truck and the cab was empty but it's too late to think about welding on the dash now. I don't have any speakers yet, I'm still trying to decide which way I want to go with those.
http://i91.photobucket.com/albums/k3...psd93b794a.jpg |
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
Dash looks good, need one more knob:lol::lol:...Jim
|
Re: What did you do with your truck today, take 2
Quote:
|
Re: What did you do with your truck today, take 2
Looks good Russell!
Do you think you could paint them to match the dash? |
Re: What did you do with your truck today, take 2
1 Attachment(s)
About 2 years ago I installed a ZZ4 motor along with a rebuilt 700R4 trans from Phoenix Transmission.
I never really liked how it would lock up the torque converter at the same time it shifted into 4th gear. This would cause a 1000 RPM drop, and if you weren't in the motor pretty hard, it was too much of a drop. So, I was at the Good Guys show in Charlotte and talked with Mark from Bowler Performance Transmissions about this issue. He explained that most people who rebuild the 700R4 set them up to do what mine was doing. But Bowler has developed a kit to address this! I must say that Mark was great to deal with. He answered every question I had in terms that made sense to me and was very knowledgeable! Well, I was sold and bought his "Lock-up Control Module" It was very easy to install after dropping the pan. It did require me to redo the wiring for the lockup, using a relay that allows it to "un-Lock" when I press the brake pedal. After finishing the install and topping of the fluid I was ready for a test drive. Let me say it works great! Now when the trans shifts into 4th, there's about a 700 RPM drop, and after 8-10 seconds the converter "locks-up" and drops about 300 RPM. It actually feels like a 5 speed trans! And even better, when I press the brake, the converter "un-locks" and its easier on the motor to accelerate again. I have to say that I'm extremely pleased with how it works and would highly recommend Bowler's product! http://bowlertransmissions.com/p/99/...nverter-module |
Re: What did you do with your truck today, take 2
Quote:
I really wish I had repaired the dash when I had the cab stripped out but this truck has been my worst planned restofication ever. I didn't plan on doing all that I have done to it but I found this forum and it snowballed from there. Apparently you understand that snowballing thing too, LOL. Your truck just keeps getting better and better. |
Re: What did you do with your truck today, take 2
I added a relay to power the headlights yesterday. I have halogen headlights and could drive it fine with the dims on but the brights were too much for the bi-metal strips on the switch. Didn't go fancy with it, just added one 40 amp relay in the circuit to the dimmer switch.
|
Re: What did you do with your truck today, take 2
1 Attachment(s)
Bought my 55 2nd a early Christmas present. A new set of door handles and scratch guards. About 75 bucks off ebay. The old ones were worn badly, the drivers side had no chrome left at all. The replacements chrome is fantastic, and they look like NOS, but I'm sure they are from China! Wonder what these will look like in 60 years?
|
All times are GMT -4. The time now is 02:36 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com