![]() |
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
Yesterdays progress was just welding some 2X4 frame curves. Today I decided my daily driver needed some work so we changed the head lights to LED then we used "GMC Sub4X4" idea for LED taillights http://67-72chevytrucks.com/vboard/s...d.php?t=623681. Makes quite a difference. |
Re: My suburban's Twisted Little Sister
Nice! Where did you get the headlights?
|
Re: My suburban's Twisted Little Sister
Frame and burb are looking good! :chevy:
|
Re: My suburban's Twisted Little Sister
1 Attachment(s)
Quote:
Quote:
The headlights came from the local truck and tractor parts supplier. I haven't decided if I like the look of them yet. They stick out about 1/2 inch. |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Here's Friday's work. One rear frame rail welded and ground and one just tacked together.
|
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Yesterday's snow storm kinda slowed things down today but we did get one rear frame rail mocked into position.
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
We got a bunch done in last couple of days. First we welded on the other rear frame rail. Second we made some boxing plates for the rear corners. Next we put in two angle braces for the rear frame rails.
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Then today we got some 1/4 x 3 flat bar drilled thee mounting holes. We bent the ends in the metal bender. The last picture is the bracket tacked in place
|
Re: My suburban's Twisted Little Sister
Quote:
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
Friday we finished the welding and then used the cherry picker to lift the rear suspension into place |
Re: My suburban's Twisted Little Sister
Looks good
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
We made a little progress the last couple of days. First we made some brackets for the batwing crossmember and got them welded on. We aren't finished with them yet. Then we cut out one of the shockwave brackets.
|
Re: My suburban's Twisted Little Sister
Very nice brackets. Did you use a plasma cutter?
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
We made a spacer for between the lower shock mount and the shockwave bracket. The we made upper and lower brackets for the shockwave |
Re: My suburban's Twisted Little Sister
Beautiful work, I will be following this one.
Dave |
Re: My suburban's Twisted Little Sister
1 Attachment(s)
Quote:
Here's my picture for today. Hot rodding in the Great White North |
Re: My suburban's Twisted Little Sister
I just found your build thread. Very interesting for sure.
My in-laws owned some property in Dresden about 25 years ago and they planned to build out there. All I remember is that Dresden seemed like the middle of nowhere (no disrespect intended). Are both your Burbs Canadian in origin? Greg. |
Re: My suburban's Twisted Little Sister
Awesome build so far!!
|
Re: My suburban's Twisted Little Sister
Quote:
Quote:
|
Re: My suburban's Twisted Little Sister
Greetings from Cambridge, I am in awe as much as I am perplexed at what you are doing. Really looking forward to seeing this one progress!
|
Re: My suburban's Twisted Little Sister
Another job of someone knocking it out of the park, some talent being displayed here.
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
We had to make a small notch for the driveshaft. Next we got the upper and lower shockwave mounts for the rear tacked in place. Then we got started making bump stop brackets. |
Re: My suburban's Twisted Little Sister
Nice work! You move fast!
|
Re: My suburban's Twisted Little Sister
i need a set of replacement burban frame horns welded on, you should cross and help me out??? i'll have some timmies(tim hortons) wait'n for ya...
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
Quote:
Today we got a bit of welding done. Then finished the bumpstop brackets and tacked them in place. Also started the rear frame turn down |
All times are GMT -4. The time now is 01:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com