Re: something different 66 long travel truck
 

nice work rob , i am getting all my parts together couple more weeks and i will have some more done , front bumper,rear bumper with skid plates and front and rear hoops i am almost 100% sure it will be bagged front and rear,and i have got my bed al most done

Re: something different 66 long travel truck
 

Bagged! Oh, I have been thinking about doing that for so long! Going from prerunner to dragging skidplate at a flick of a switch. Dude, you HAVE to post pictures of this as progress is made!:metal::metal::metal:

Just dont go cheap on shocks, I have seen a few prerunners with bags, and you NEED real deal shocks. If you run bags for the springs, be sure to use limit straps, get a triple bypass shock if you can, and let it rip!

Re: something different 66 long travel truck
 

Here is your inspiration for bags.

http://grunionfabrication.com/Galler...n001.sized.jpg

http://grunionfabrication.com/Galler...6420.sized.jpg

http://grunionfabrication.com/Galler...6424.sized.jpg

Re: something different 66 long travel truck
 

This was all completed in less then 8 hours, all with scrap laying around the garage, except for the tubing.[/QUOTE]

Cool...did you gusset behind it too ?? Looks like one good hit, and it would buckle upward.

Cool looking though.


Although, I would build beefy bumpers that would double as air-tanks.

Re: something different 66 long travel truck
 

Cool...did you gusset behind it too ?? Looks like one good hit, and it would buckle upward.

Cool looking though.


Although, I would build beefy bumpers that would double as air-tanks.[/QUOTE]

I gussetted it back under the frame for about 4 inches, and along the side of the framerail. I didn't do the upper, my thinking is that it is alot easier to replace the front bumper if it gets slammed harder then it should, then to replace the framerail under the suspension mounting points. I built the bumper on my truck the same way, haven't had any issues yet, and it survived a good front end stuff into a dune at about 40 that stopped the truck.

Re: something different 66 long travel truck
 

kevin thats just sick, and it does lay

Re: something different 66 long travel truck
 

Yours will be sick also.;)

Re: something different 66 long travel truck
 

Re: something different 66 long travel truck
 

I'm diggin it dino!

Re: something different 66 long travel truck
 

Cool

Re: something different 66 long travel truck
 

almost ready to get back on it waited for some machine parts to be finished

Re: something different 66 long travel truck
 

did some trading and got my wheels an tires 37x12.50-17teens and they are huge .The best part is they fit:metal: got my bed home and i need to trim it out for all the shocks , got all the rest of the parts, just need my machine stuff and i can get to work on it

Re: something different 66 long travel truck
 

Those are 37's?! They look so small on that rig

Re: something different 66 long travel truck
 

yeah i know i could have gone with 40" :lol:

Re: something different 66 long travel truck
 

Those are sweet !!! I sure could use those on my Chevy powered Samurai !!!

Re: something different 66 long travel truck
 

looks very cool, and menacing:ito:

Re: something different 66 long travel truck
 

sweet keep the pics comming!

Re: something different 66 long travel truck
 

I think this post has convinced me to go the other way with my 63 i was going to cut up the frame and make the truck lay frame, but seeing this makes me think it will look tuff sitt'n up nice and high! dino how are you going to lift the back, is there someone out there that makes lift springs for the back in this year? or will 68-72 springs work also?

Re: something different 66 long travel truck
 

I think i am going to bag the rear, the back is no problem,there are many ways .One is there are lift springs,or a spacer for the spring,the old school way was to flip the axle on the bottom of the trailing arm that was about 4" which i dont need much lift on the rear,

Re: something different 66 long travel truck
 

yeah when i was putting my 63 together for the first time i did that and thought to my self dang!!! it sits high in the rear, then i realized what i did.......but hey i was 14 i didn't know any better!

Re: something different 66 long travel truck
 

is there any negative effects of flipping the axle!!!

Re: something different 66 long travel truck
 

I am not sure but i don't have a super horse power motor, I mock up the bed to day.

Re: something different 66 long travel truck
 

what's up with those rear marker lights? custom add on?

Re: something different 66 long travel truck
 

That thing looks cool as heck all lifted. I'm not a huge lifted fan, but dang... Howcome you got rid of the flatbed, was kinda quirky and unique looking for bein custom.

Re: something different 66 long travel truck
 

yeah the bed is off a custom, the cab is the big window inside of my shop