The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Let's see 18" & 20" wheel combo's. (https://67-72chevytrucks.com/vboard/showthread.php?t=272783)

russj67

08-19-2010 04:20 PM

Re: Let's see 18" & 20" wheel combo's.

Here is mine. Not really in the weeds, I like the look of tires matching the lines of the fender...but I also like em lower.

http://lh4.ggpht.com/_PZduIY2AOPU/S4...2/DSCN3901.JPG

http://lh5.ggpht.com/_PZduIY2AOPU/Ss...0/DSCN3837.JPG

jkade

08-20-2010 10:41 AM

Re: Let's see 18" & 20" wheel combo's.

Quote:

Originally Posted by russj67 (Post 4147530)

That is a sweet looking step side:metal:

my1st69

08-20-2010 05:45 PM

Re: Let's see 18" & 20" wheel combo's.

so what would one of these setups cost me about 2k from the look of some of these. what kind of back spacing is required for somthing like this

russj67

08-21-2010 12:13 PM

Re: Let's see 18" & 20" wheel combo's.

Quote:

Originally Posted by my1st69 (Post 4149281)

so what would one of these setups cost me about 2k from the look of some of these. what kind of back spacing is required for somthing like this

I was right at 2k for tires and wheels. I ran 5" bs, but I believe it would need to be different for a 69 since 67's have a narrower rear end.

BrandonMcKinney

08-21-2010 05:30 PM

Re: Let's see 18" & 20" wheel combo's.

any one have any info on this truck? id like this drop for my truck with a similar wheel and tire combo.http://67-72chevytrucks.com/vboard/a...1&d=1199653905

cardreams

08-21-2010 05:37 PM

Re: Let's see 18" & 20" wheel combo's.

any one on here own any off these truck want to know if any are for sale????

big mike71

08-21-2010 05:52 PM

Re: Let's see 18" & 20" wheel combo's.

Quote:

Originally Posted by OLDROCK&ROLLER (Post 4145458)

cause I like it..

This is why you have watch what you say about truck on this site. There is a good chance it's a members truck.:lol:

Ruscal

06-10-2015 02:21 AM

Re: Let's see 18" & 20" wheel combo's.

Quote:

Originally Posted by russj67 (Post 4147530)

Here is mine. Not really in the weeds, I like the look of tires matching the lines of the fender...but I also like em lower.

Russ,
Sweet looking truck!
I'm building a '67 step right now and am curious about your rear tire and wheel clearance to bed and fender lips.
I just installed some 18x9's with 5" BS. They are about 1/2" away from the bed, and have plenty of room on the outside. You must have similar clearance on the inside as I do, but you are filling the wheel well on the outside due to the 10" wide wheel. Do you ever rub? Mine is not a running truck yet, so can't test.
Russ

russj67

06-10-2015 08:53 PM

Re: Let's see 18" & 20" wheel combo's.

I had to roll the inside lip of the fenders and dial the side to side alignment, but no rubbing issues after that. Good luck on your build!

OregonNed

06-10-2015 09:07 PM

Re: Let's see 18" & 20" wheel combo's.

http://i1320.photobucket.com/albums/...ps9af4143a.jpg

Ugliest 18's ever! when I bought it... gave them away later and went 15"

trkfrk

06-11-2015 12:17 AM

Re: Let's see 18" & 20" wheel combo's.

1 Attachment(s)

It's funny to run across this old thread since it was my very first post. I might as well post an updated pic since its been 5 years:metal:

Here is 5 years ago

trkfrk

06-11-2015 12:26 AM

Re: Let's see 18" & 20" wheel combo's.

1 Attachment(s)

Up to date with my 18"x20" wheels.

All times are GMT -4. The time now is 01:29 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page