Re: Impala SS Rear Disc Brake Brackets
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
If these are anythjing like the first set I got they will be top notch. Very nice workmanship.
|
Re: Impala SS Rear Disc Brake Brackets
1 Attachment(s)
Here is a pic of the new redesigned Impala SS caliper brackets. The hardware is the same as before so I didn't include that in the new pic.
|
Re: Impala SS Rear Disc Brake Brackets
any pics of the guys trucks that have bought these brackets?
|
Re: Impala SS Rear Disc Brake Brackets
Captfab,
ill take a set as well i am looking to turn my rear setup from drum to disc and this will look alot better in the backsides of the 20s i got on my truck thanks pat |
Re: Impala SS Rear Disc Brake Brackets
Sorry but no I don't have any pics other than what I've posted. I have hinted to a few customers about posting pics, but so far no one has that I'm aware of.
Quote:
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
Shot in the dark here, but do you know if they will fit an 8.2 10 bolt from a Chevelle? If not could you give me some dimensions like the offset of the SS rotors, how thick they are at the wheel mounting surface and the distance from the backing plate flange to the axle flange on the 12 bolt rear end?
|
Re: Impala SS Rear Disc Brake Brackets
No these brackets won't work on a 8.2 passenger car 10 bolt. The axle tube flange has a different bolt pattern and the Impala SS rotors won't fit since they are a 5 x 5 bolt pattern and the 10 bolt you have is 5 x 4.750 Of course you could drill some holes and they might work, but I don't know if the calipers and rotors would line up on the 8.2 10 bolt.
I'll have to look up those dimensions and get back to you. Quote:
|
Re: Impala SS Rear Disc Brake Brackets
Thanks. I'm going to have my axles redrlled to 5x5 to match the front, just hoping I wouldn't have to do rotors too.
|
Re: Impala SS Rear Disc Brake Brackets
Quote:
Quote:
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
Quote:
If the hole in the middle of the bracket is small enough you could just redrill the plate for a dual bolt pattern so it fits cars and trucks. |
Re: Impala SS Rear Disc Brake Brackets
interested in a set, just want to make sure you have a set before i paypal. thanks.
|
Re: Impala SS Rear Disc Brake Brackets
As of right now I am out of these. I've been busy on a new brake conversion, so I haven't ordered any more of these just yet. If need be I can get more parts for these in 2 days.
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
?Do these work on 90 silverados?2wd?If so Im game
|
Re: Impala SS Rear Disc Brake Brackets
As far as I know they do. Tell you what, I have a '90 as well, so let me verify that they are going to work before I go and sell you a set. I should be able to determine that tomorrow.
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
That would be great I was gonna get the Kore brackets but these look like they will do the job also.I will run s10 front calipers in the back and keep it rolling
|
Re: Impala SS Rear Disc Brake Brackets
Sorry I didn't get around to pulling a wheel off and checking that out. I will do that either tomorrow or Saturday. You won't be able to use S10 calipers on these brackets. They will only accept the '94-'96 Impala SS/Caprice rear calipers.
Quote:
|
Re: Impala SS Rear Disc Brake Brackets
To install these on a 63 12 bolt I would just need to redrill my axles (i have 6 lug now) and grind the rotor a little to allow it to seat on the axle? Rest is bolt on?
Would someone that has done this share with us what they spent on the rest of the parts needed? |
Re: Impala SS Rear Disc Brake Brackets
Yes you would need to convert to the 5 x 5" bolt pattern on your axles. I don't think you would need to 'grind' on your axles. The one thing you need to check though, is the '63 12 bolts had pressed on backing plates. So without the typical backing plate flange, you can't bolt on anything. I would check yours though. It may be a late '63 or it may have been changed at one time.
The most expensive part of this conversion is buying the rebuilt calipers. Loaded ones are around $125 ea. plus the core charge. you can sometimes find good used ones locally, on ebay, or on car-part.com I'm planning on developing a 6 lug rear disc conversion in the near future if that helps you any. Quote:
|
Re: Impala SS Rear Disc Brake Brackets
ah crap I think I have the pressed on backing plates. I didn't even think about that. Was thinking about going 5 lug so I could run some old school wheels like cragars or supremes. Might have to just do what I was thinking of doing which is drill the axles for 5 lug and get 5 lug drums from ECE
|
Re: Impala SS Rear Disc Brake Brackets
Just received my plates this week.Man they look awesome.Now to have em powdercoated and i just bought my calipers and rotors for a 95 impala SS total was 181.00 w/o the cores.I should go pick up a junk set of calipers somewhere..
Thanks again captfab for the sweet plates.I`m really considering pulling out my spare rearend i got laying over here, gut it clean, have the housing powdercoated and put some new gears in it w/ a locker... thanks pat |
Re: Impala SS Rear Disc Brake Brackets
Hmm so thats the kicker..you have to use Impala calipers..Ill read through this thread to see what brake hoses are needed or if I can just get some made at the local hydraulic hose shop..If the rear ends on the other trucks are the same they should work just fine but I can wait for your word thanks again
|
Re: Impala SS Rear Disc Brake Brackets
Well bad news.....these will not work on a '88 and up rear end. I thought they would, but the bolt holes on the axle tube flange are different and the distance from the axle tube flange to the axle flange is more than the '87 and earlier rear ends. Good thing I checked.
If there was enough interest I could design a set for the '88 and up rear ends. Quote:
|
Re: Impala SS Rear Disc Brake Brackets
Well I'll go ahead and tell u... The interest is there I know I want to do mine.. If you post in that years forum they would sell like hotcakes lol
|
Re: Impala SS Rear Disc Brake Brackets
Quote:
The modified brackets should sell well to the new body style trucks and to the square body guys who have retrofit their trucks with the newer rear end too. You shouldn't have a problem selling the revised brackets. |
All times are GMT -4. The time now is 07:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com