Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
nice job man! |
Re: Show us your projects
1 Attachment(s)
Attachment 509295
Here's a shot of my engine. They are Sanderson C 10 Headers. I'm pretty impressed with their fit. The serpentine belt setup is off of a 1993 5.7 Silverado. I'm going to get my frame painted within the next couple of weeks and then set my cab back on. I'm in the process of coating the bottom of the cab now with tintable bedliner. |
Re: Show us your projects
hey thats the same swap i did!! makes for alot of a lower stance and aint that hard to do but alot of people think it is??
*****in truck man!:metal: |
Re: Show us your projects
I'm going to try and find the photos I took of the inside floor of the cab. I made some caps to cover up where the frame rails come up through the floorboard. I have two borla pro xs 2.5" inlet/dual 2.5" outlet mufflers that I plan to have installed within the next month or so. I'm planning to run two exhaust tips out each side between the rear of the cab and the front of the rear wheels. I found an emergency brake lever off of a late model camaro that I am going to mount on my shifter bracket to the right of my shifter. I think it will hook up to the stock 1977 e brake setup pretty easily. I'll post some pics when I do.
|
Re: Show us your projects
1 Attachment(s)
Here's a shot of my cab floor. The raised area covers the 1977 frame rails. It gives me the low stance look with the original suspension travel.
|
Re: Show us your projects
Since I haven't seen any pics of someone building one of these, I'll post mine. It's a 1955 short bus (REALLY short!) that I'm going to transform into a beater to run around to car shows in and piss off the local crying baby brigade.
Nik http://i149.photobucket.com/albums/s...ithgene006.jpg |
Re: Show us your projects
Quote:
|
Re: Show us your projects
I luv this bus idea...
keep us posted man! :smoke: |
Re: Show us your projects
Yes. I did it myself.
|
Re: Show us your projects
A friend of mine once wanted to tint his windows to look like there were skeletons wearing old hats sitting in the vehicle when you looked at them at just the right angle. That would be really cool on this bus.
|
Re: Show us your projects
3 Attachment(s)
Will be taking 57 frt clip then 58 cab(Green & White) with 57 cab(Grey primer) mated to it (King Cab) Then 57 stepside box widen setting it all on 95 long bed chassis (red utillaity) ,
2nd project : will put 58 shortbed fleetside box behind Black 57; |
Re: Show us your projects
3 Attachment(s)
Here is my project. It will probably stay the way it is until I get finished with school and get some money saved up. Thinking that I will do an S-10 swap and a small block V8 and leave the body alone. Then whenever a kid comes along turn it into a project for them.
|
Re: Show us your projects
Nice looking truck. I like your plans for it also. Wish I would have done that; left my body alone.
|
Re: Show us your projects
1 Attachment(s)
Hi, I am knew to this site so bear with me, But my project is a 1959 Chevy LCF vicking, was an old mobile home toter, plans are 5.9 Cummins diesel and Allison trans. would like to make it a rollback.:chevy:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Quote:
|
Re: Show us your projects
Here's my 59 GMC....
http://i36.tinypic.com/n6dvk3.jpg http://i33.tinypic.com/al292o.jpg http://i34.tinypic.com/8xobiu.jpg Getting ready to Z the previously installed 75 Camaro subframe up 2 more inches. Rear is notched pretty large and I have a custom 4-link going together for it. Engine is fuel injected LS1, probably gonna be twin turbo'd. Plan is for a decent daily driver :) |
Re: Show us your projects
This is the build and first fire of my now 16 year old son's '54 Chevy truck. The bed and grille are from the '54 my mom had when I was 8 years old in 1977.
No sound until it fires. Then the first drive... |
Re: Show us your projects
The wheels I used were cheapie ETIII/Halibrand knock-offs. Here's where to find them http://www.jdwheels.com/street_rods.htm Brad
|
Re: Show us your projects
Quote:
Is the front window V butted? Thanks |
Re: Show us your projects
3 Attachment(s)
Too late to turn back now !!!!!
|
Re: Show us your projects
2 Attachment(s)
Great variety of projects here!
While we haven't started working on our '52 GMC yet, here's a couple of pics (posted in the welcome thread earlier)... once we get it home we'll start digging into it and seeing where we end up. |
All times are GMT -4. The time now is 01:55 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com