Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

i did it kinda the same in my 60-63 gauge panel. wanted a vac gauge for the left side (my K10 has the vac brakes) but haven't found one yet that i liked. so i put a $9 volt gauge there temp. tack is an old dixo--didn't want a 8k but the price was right.

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

Is that an aftermarket voltmeter or is it an OEM gauge?

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

Capt--if asking about mine, its a chevy blazer i think. it's like the one showed earlier in this thread. i cut it into a round circle and mounted it on the org. blank plate. looks ok---not show Q.

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

I want to thank you for posting your process for Amp to voltmeter conversion, I followed it worked perfect. I modified my dash replaced it with the voltmeter and it works great. Here is a picture of it.

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

1966chevy,
What car was that voltmeter originally from?

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

1980 chevy truck Silverado, using the same/stock gauge face from the 1966 deluxe gauge.

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

JUST A LITTLE UPDATE:

FINAL RENDITION INSTALLED BATOMETER AND SUN TACH 66 GMC....

:gmc2:

http://kieth.smugmug.com/Trucks/66-G...WmmMg&lb=1&s=A

IN THE TRUCK: :gmc2: :uhmk:

http://kieth.smugmug.com/Trucks/66-G...PBQ7f&lb=1&s=A

Re: 64-66 Chevy Stock Gauges - Voltmeter vs Ammeter (Batt)?
 

I went to a junk yard and got the volt meter, have it installed in the cluster cutout thing and ready to install, but how do you hook up the wiring harness to the voltmeter? Did you cut the factory plug and install ring terminals? Any pictures? This is a great writeup, and I tested my gauge before installing. Just hope it all works when I get it back together, haha.