Re: Daverods 52
Quote:
|
Re: Daverods 52
Quote:
|
Re: Daverods 52
Quote:
http://belair.smugmug.com/Art/CLEAN-...31_jmiWZ-L.jpg |
Re: Daverods 52
Now how does the engine help the grill?
I ended up with the 30gal Kobolt. I didn't have room in the eletrical box. I'm not going to be in my house but for maybe a couple more years. And it's dual voltage! |
Re: Daverods 52
Well, that sucks.:waah: I don't think that 30 gal would keep up with my 20 ga. brad gun.:lol::lol: No sand blasting for you. I'm sure you'll put it to good use though.:metal: The engine turns the rotisserie and provides smoke for the smoker. Da
|
Re: Daverods 52
I see.
My dad has the same compressor and I used it to sand blast my frame, didn't have any problem with it keeping up. I had it set to I think 70psi and I was using my pressure blaster. Also used it to paint the frame. I actully thought about buying him the 60gal tank and taking his. They are about the same in price. Would have been better for the plasma. |
Re: Daverods 52
3 Attachment(s)
Brown truck guy came. New floors.:metal: Sanded alittle on my hood. Had to take the whole front clip apart to change the fender.
|
Re: Daverods 52
Your not wasting any time are you. :clap:
|
Re: Daverods 52
I'm good at taking things apart.:lol:
|
Re: Daverods 52
Got a S10 frame, 118" with front running gear and a title. $100.:metal: Got the passanger side floor done.
|
Re: Daverods 52
Nice find. No diff though?
|
Re: Daverods 52
I heard a 4x4 rear end is wider. I guess I'll try to get a 4x4 one. I'm not sure how much wider it is? I think you have to use spacers anyways. Might be cheaper just to get a reg one and spacers. I know where a cheap reg one is.:ito:
|
Re: Daverods 52
Why do you want a wider rear end? Then you can't put wide tires on it. :uhmk:
Nova, or an S-10 with rear disc brakes. |
Re: Daverods 52
The tires rub on the bed. The axle is to narrow. You can use offsets but you still need to use spacers. Rear disk brakes, nice.
|
Re: Daverods 52
Use a ZR2 4wd rear. It is a nice option but if you go wider that 8 inch tires you may rub your fenders
|
Re: Daverods 52
5 Attachment(s)
:metal:
|
Re: Daverods 52
2 Attachment(s)
:waah: One down one to go.:uhmk: Sold my 283 and the 52 frame got some cash for my rear end,
Found a Zr2 (no posi), 10 bolt 3.42 gears for $350. S10 4x4 3.42 gears for $150. Zr2 3.73 w/posi $650. |
Re: Daverods 52
Should get my frame tomorrow. The guy had to take the cab off it, then carry it by hand out of the junk yard.:lol::lol: Dumbest junk yard I ever seen. Cars and truck everywhere no way in or out.:smoke::smoke:Did have a bunch of inline 6's.
|
Re: Daverods 52
Where's the yard at?
|
Re: Daverods 52
Poky Waynes. No 292's
|
Re: Daverods 52
Are you running a 6 cylinder or a V-8? You might get better gas mileage with the V-8. Long time ago my friend had a 61 Belair with a 6, and I had a 58 Chevy convert with a 283. I got better gas mileage than he did.
|
Re: Daverods 52
I'm going with a 8 or a newer 6 maybe a 4.3. No inline stuff I aready have that.:uhmk: I really want a LS but I don't think I'm smart enough. yet.:smoke:
|
Re: Daverods 52
Dave you can come pick up a extra s10 rear end that I got. It's in East Texas.
|
Re: Daverods 52
Where exactly is Wayne's? And how are the prices?
|
Re: Daverods 52
It's on the old hiway going to simplots just past pacific recycling. Prices seems good frame was 100. I saw a inline on craigs 235 out of a car 150.
|
All times are GMT -4. The time now is 03:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com