Re: 1965 chevy truck one piece @a time
Quote:
North pole watch out for that Red Hot Rod Sled :lol: |
Re: 1965 chevy truck one piece @a time
Quote:
It has its limits and its challenges living up here for sure!! I got into my project so I would have something other than World of Warcraft to do all winter long. |
Re: 1965 chevy truck one piece @a time
3 Attachment(s)
little stuff i did its the corners that are needing the sanding now :ito::chevy: should i use paint stripper oae take the hand sandinf trip ummm ..
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
drilled and mounted the passanger side sunvisior mount and got the rear sway bar today and striped the hardware down for powder coating next week :uhmk::metal::chevy:
|
Re: 1965 chevy truck one piece @a time
what are you using to strip the paint on the inside of the roof?? Looks good!!
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here is more from what i striped and sanded on will take the sway bar in next week to get it coated lik the front and then mount it up
|
Re: 1965 chevy truck one piece @a time
im using and 1/4 air grinder and scoth brite sripping wheels and a sandpaper 1 1/2 flapper wheel to get in the corners of the ribs of the roof and around the raido
will post the pics tomarrow it took a little bit of time to strip it down to and then last I'm using an d a sander with 180 to get t read for primmer and then paint .. |
Re: 1965 chevy truck one piece @a time
Thanks. I was thinking the same thing, I bought a whole box of the scuff disc for my 1/4 angle grinder so I guess ill be doing it that way also.
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Sunday a little wett out side was able t get the corners done in side the cab on the radio and on the roof rails .. also blasted the rest ofthe stuff under the hood for powder coating .:metal::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
a few more pics :uhmk::metal::chevy:
|
Re: 1965 chevy truck one piece @a time
I like where you're going with this build. I used the same rear bar on my truck but have yet to drive it. They look to me as if they belong. How do you like the wilwood calipers? Where did you pick up those rotors? Keep it up.
|
Re: 1965 chevy truck one piece @a time
Quote:
will see im going to get new rims but if the rub 15in wheels I'll step up to 16in.the rotors i got from lmc . there for an 71-72 chevy truck .if you use them on 70 you need the bigger bearing ?? i had to change i couldet use the new ones they sent in the kit .:chevy::metal: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Did a little more blasting today on the stuff for the fire wall . bought an deluxe
blower box cheap 10.00 . but the pics will tell the story for if it was an good deal. :uhmk: :chevy: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
more pics:chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
some of the pics of the clean up on the box from the media blaster :uhmk:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
Then we found the holes from blasting all the rust out of the inside the box ..
on to the wire welding the holes up and hammering the dents out of the corn and under neath .. I KNOW ITS NOT SEEN FROM THE BOTTOM :lol: But i want it looking right ... po must have had some issues :lol: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here is what it looks like after some twiking on it with and hammer still have a hole or two to fill and then smooth the in side with some metal filler or jb weld not sure yet or start lookin for another lower housing :sumo:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
:metal:here is the last few pics the blue box is my recyclebles that are going to the powder coater this week :uhmk::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a little update .primed and por 15 the inside of the blower box today..
had to turn the heat on in the shop to get the primer to set up ... and took the sway bar and things to the powder coater today.. should have the stuff back next monday or tuesday .. will see no rush .:metal::lol::chevy: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
just a couple more pics :metal::chevy:
|
Re: 1965 chevy truck one piece @a time
heater box looks real good! Are you just brushing on the por-15. Looks like your getting good results with it.
|
Re: 1965 chevy truck one piece @a time
Hi i did brush it on i went a little heavy on the inside to cover up the pitting
and brushed it on the outside ill scuff it up and prime it an paint it and build the box to get ready to put back on when i paint the fire wall :metal: it will be on there for ever unless i restore the tuck AGAIN in 30 years :lol::metal::chevy: |
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
little more pics of the heater box primered and paint waiting on the core to come back from the red shop :uhmk: sand blasted the srews for the box also all before lunch :lol::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
afew more of the box lunch is over back to the shop going to work on the cab pics to after after dinner :lol::metal::chevy:
|
Re: 1965 chevy truck one piece @a time
5 Attachment(s)
here ia what i did untill the vac on the media blaster died .......
looks like i need an new electeic motor or i my be able to ge parts to fix it :lol: its an 1970's dry vac from dayton . did start the old air file on the inside the cab to fix a couple of ruff spots on under the window. the last two are from the media blaster i hope i can by the fan. the moter and brushes look ok but being 30 something years old .. it might be cheeper wirh an new dry vac . will see :lol::metal::uhmk: |
All times are GMT -4. The time now is 09:37 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com