The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 19 12 3 4567813 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   OR Parting out 72 Suburban C10 402 TH400 (https://67-72chevytrucks.com/vboard/showthread.php?t=516049)

Jon Scully 03-28-2012 08:59 PM
Re: Parting out 72 Suburban C10 402 TH400
 
a set of the blue seat belts? to 55605 or if you would do it canada postal code P7A6P7
thanks
jon

Jon Scully 03-28-2012 09:00 PM
Re: Parting out 72 Suburban C10 402 TH400
 
also the blue armrests for rear with ashtrays, thanks.

capev86 03-28-2012 09:18 PM
Re: Parting out 72 Suburban C10 402 TH400
 
I SO want the seats out of that last truck and I'm going to be in the Vancouver/Portland area the end of May. Unfortunately I'm flying because I only have a week. Do you know anyone headed for the east coast in the next few months?

tll74 03-29-2012 02:04 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by budnikguy (Post 5280306)
I will take a nice set of 3....and have funds ready for all items....but may be best to wait a bit as you part out the other white 72 'burb ;) Or I can pay you now for these items and have you hang onto them until we get to the next burb..LMK

Adam
Adam, it would be best if you could pay for the parts now and then wait for the other to be parted. I would set them a side and combine shipping on any other parts you decide on. This way I could cross them off the list.
Quote:
Originally Posted by Jon Scully (Post 5280843)
a set of the blue seat belts? to 55605 or if you would do it canada postal code P7A6P7
thanks
jon
Jon, When I get to the 72 C10 I'll let you know and give you first chance.
Quote:
Originally Posted by capev86 (Post 5280889)
I SO want the seats out of that last truck and I'm going to be in the Vancouver/Portland area the end of May. Unfortunately I'm flying because I only have a week. Do you know anyone headed for the east coast in the next few months?
No luck on anybody traveling your way. I could ship them via freight truck.

Slinger60 03-29-2012 09:33 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Will you be cutting any patch panels off these? If so I am interested in the lower section behind the drivers door to rear wheel well. And maybe a couple other sections to.Thanks Shawn.

budnikguy 03-29-2012 10:57 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Pm me your PayPal info and I will take care of payment. Thanks
Posted via Mobile Device

tll74 03-29-2012 05:11 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by budnikguy (Post 5281856)
Pm me your PayPal info and I will take care of payment. Thanks
Posted via Mobile Device
PM sent

tll74 03-29-2012 05:14 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by Slinger60 (Post 5281746)
Will you be cutting any patch panels off these? If so I am interested in the lower section behind the drivers door to rear wheel well. And maybe a couple other sections to.Thanks Shawn.
Shawn, the lower section on the 4x4 is junk. I'll check the white when I get it in. What other cuts are you looking for?

capev86 03-29-2012 06:09 PM
Re: Parting out 72 Suburban C10 402 TH400
 
If you could give me an idea of what truck freight would be.

At the very least I would like the middle seat (if it the best of the two) with the brackets from the third row, and the upholstery from the front seat to patch my front seat that needs the embossed vinyl middle piece of the lower cushion replaced. depending on your price/shipping i would consider taking the other short seat off your hands also. and what is that in the way back of the same truck...another matching seat or just blue?

also, any good headliner panels between the two trucks?

Slinger60 03-29-2012 08:04 PM
Re: Parting out 72 Suburban C10 402 TH400
 
The other section is on pass. side lower section between third door and wheel well. I will roll her out this weekend take a couple pics of both the sections i need. Thanks Shawn.

Slinger60 03-29-2012 08:09 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Also would be interested in both outer front bumber supports off the 4x4 when you get to parting that one. Thanks again Shawn.

tll74 03-29-2012 09:42 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by capev86 (Post 5282450)
If you could give me an idea of what truck freight would be.

At the very least I would like the middle seat (if it the best of the two) with the brackets from the third row, and the upholstery from the front seat to patch my front seat that needs the embossed vinyl middle piece of the lower cushion replaced. depending on your price/shipping i would consider taking the other short seat off your hands also. and what is that in the way back of the same truck...another matching seat or just blue?

also, any good headliner panels between the two trucks?
I'll check on freight once I get it in for measurements. I think if I take it apart it would go UPS or Fedx in two packages. The very back seat is out a mini van or something. Didn't pay to much attension as it was not a sub seat. The first two have no headliner panels, the third may. It is next to do after the K10. I own the truck but have not picked it up yet from the PO. The wife say's no because if I brought it home she would loose her parking spot and she is not willing to park at the bottom of the driveway which is a 1/4 mile long and up hill. With 32 trucks now to get parted I'm out of room! Be patience, it will a bit before it is in the shop.
Quote:
Originally Posted by Slinger60 (Post 5282642)
The other section is on pass. side lower section between third door and wheel well. I will roll her out this weekend take a couple pics of both the sections i need. Thanks Shawn.
Shawn, pics would be good. I'm parting out the K10 now. Actually the bumper is the first to come off. Working on it in just a few minutes.

Thanks, Tom

capev86 03-29-2012 10:37 PM
Re: Parting out 72 Suburban C10 402 TH400
 
yeah...absolutely no rush....just wanted to put dibs in before someone beat me to it. you already have plenty of parts coming my way...that will keep me busy for a little bit!

2003 silverado 03-30-2012 01:12 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Are the wht visors spoken for ?If not shipped to 19382?

nate_g_2003 03-30-2012 02:48 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Are the white/parchment seatbelts and retractors still available?

19JOEPY72 03-30-2012 03:12 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Bye any chance would you have the bottom latch to passengers bucket seat

budnikguy 03-30-2012 07:25 PM
Re: Parting out 72 Suburban C10 402 TH400
 
sent you $$

tll74 03-30-2012 08:30 PM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by 2003 silverado (Post 5284035)
Are the wht visors spoken for ?If not shipped to 19382?
They are up for grabs. UPS is exactly 13.00 USPS may be be a couple bucks less. I have a daily pickup for UPS.
Quote:
Originally Posted by nate_g_2003 (Post 5284189)
Are the white/parchment seatbelts and retractors still available?
YES
Quote:
Originally Posted by 19JOEPY72 (Post 5284230)
Bye any chance would you have the bottom latch to passengers bucket seat
No bucket seat parts at this time.
Quote:
Originally Posted by budnikguy (Post 5284590)
sent you $$
Adam, THANKS

Thanks to all, Tom

Slinger60 03-30-2012 09:29 PM
Re: Parting out 72 Suburban C10 402 TH400
 
2 Attachment(s)
Here are some pics of the sections that I need. Could use the wheel arches if they are any good on the other 2 your gonna part. Also have some other parts that I want off the 4x4 when you get round to listing parts for that one.Thanks Shawn.

2003 silverado 03-30-2012 10:51 PM
Re: Parting out 72 Suburban C10 402 TH400
 
would you do 40 shipped on the visors wht ones?

tll74 03-31-2012 02:40 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by 2003 silverado (Post 5284997)
would you do 40 shipped on the visors wht ones?
Sorry, I think I'll hold out for the 40.00 plus the shipping.
Thanks, Tom

tll74 03-31-2012 02:46 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Shawn, The current K10 that I'm doing is rusted out in these spots. I'll check the third one when I get it in. Thanks, Tom

Slinger60 03-31-2012 10:21 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Ok thanks for looking Tom. Has anyone claimed the lower molding? If not I will take it all price shipped to 96062. Thanks Shawn

tll74 04-01-2012 01:23 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Shawn, They are up for grabs. I had give a shipping cost and got no response. You want the RH rear door molding? It is free but good for a driver only with some tlc. Shipping 9.00 Thanks, Tom

Gary 70 Jimmy 04-01-2012 03:04 AM
Re: Parting out 72 Suburban C10 402 TH400
 
Quote:
Originally Posted by tll74 (Post 5272315)
Gary, I have the stove only. I need to get it off and check condition. Will do and price. It will be next week.

Adam, If I have a Ign and door set matched from another truck, I will sell it all. I planned on using this set for my 72 Super. I'll check. The tub is history. I hauled to scrap. It was rusted out everywhere and full of bondo. Plus I had no room to store it.

Josh, 50.00 on the 4x4 shift linkage, perfect fan shroud 100.00 (expensive to ship), 50.00 on cover with t-case shift hole, will check the dipstick, are you looking for the the one with the brace?, 40.00 on the cross member, and how far back on the frame cut? Buy it all we'll do a package deal.

92.00 on parts and 15.00 shipping

Only have the wing nut and plate. May have the nut in the other two. I'll check. I will get shipping cost.

Sorry the gate is also history. It was rusted out so I scrapped it.


Tilt column has already been sold. I have another on in the second 72 C10 yet to part. I'll look it over and report back late Sunday.
Did you get any pictures of the stove pipe.


All times are GMT -4. The time now is 01:56 PM.
Page 3 of 19 12 3 4567813 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com