The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   FL Factory big block parts (https://67-72chevytrucks.com/vboard/showthread.php?t=561770)

Hart_Rod 01-22-2013 03:11 PM
Re: Factory big block parts
 
Quote:
Originally Posted by brian1971 (Post 5835445)
Is that for both sides if so pm Paypal info
Thanks Brian
Posted via Mobile Device
just one

brian1971 01-22-2013 03:14 PM
Re: Factory big block parts
 
Sorry the one I really need is the driver side,I'll pass thanks
Posted via Mobile Device

70STOVEBOLT 01-22-2013 05:22 PM
Re: Factory big block parts
 
Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark

Hart_Rod 01-22-2013 06:16 PM
Re: Factory big block parts
 
Quote:
Originally Posted by 70STOVEBOLT (Post 5835734)
Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark
PM sent.

Hart_Rod 01-24-2013 10:06 AM
Re: Factory big block parts
 
Quote:
Originally Posted by bcnya2 (Post 5833890)
Hello...are the stands '72?..would you separate the stands and the mounts? If so, how much? If you cant, I understand. Thanks, Greg
Posted via Mobile Device
BCNYA2 - you are up for the motor stands.


Quote:
Originally Posted by 70STOVEBOLT (Post 5835734)
Rob, yes I am talking about the clips at the bottom of the shroud. Sorry, I don't have a pic. I am going to pass on the engine stands, but I do want the shroud and heat shield, and I will make you an offer on the front coil springs as soon as I can find a value on them.

Thanks,
Mark
Mark - are you still wanting these parts? I've been holding them for you, let me know what you want to do....

70STOVEBOLT 01-24-2013 10:26 AM
Re: Factory big block parts
 
Rob, I do want the shroud w/clips and the heat shield but I am going to pass on the engine stands. If you can throw the springs in for $50 I will take them as well. That would make the total $185.00. I apologize, I thought I sent you a pm. If this sounds
good to you, pm your address and I will get you a postal money order on the way.

Thanks again,
Mark

Hart_Rod 01-24-2013 10:35 AM
Re: Factory big block parts
 
Quote:
Originally Posted by 70STOVEBOLT (Post 5839468)
Rob, I do want the shroud w/clips and the heat shield but I am going to pass on the engine stands. If you can throw the springs in for $50 I will take them as well. That would make the total $185.00. I apologize, I thought I sent you a pm. If this sounds
good to you, pm your address and I will get you a postal money order on the way.

Thanks again,
Mark
Mark - I will go $200 for all that, shipping on the springs and shroud is going to be expensive. PM sent with mailing address.

R/

70STOVEBOLT 01-24-2013 12:08 PM
Re: Factory big block parts
 
Rob, I am going to pass on the springs, I will send you a postal m.o. for $135.00 for the shroud w/clips and the heat shield. I received your pm and I sent you a reply as well.

Thanks,
Mark

RenoKeene 01-24-2013 12:31 PM
Re: Factory big block parts
 
PM headed your way.

Hart_Rod 01-26-2013 09:36 AM
Re: Factory big block parts
 
Quote:
Originally Posted by RenoKeene (Post 5839714)
PM headed your way.
Parts should be shipping today!
Posted via Mobile Device

nobolt 01-26-2013 12:36 PM
Re: Factory big block parts
 
if you are scrapping the bed i would be interested in the rear tail light posts on each side of the tailgate with the trunions for wall art. lets say from the rear marker lights back. depending on price of course. i have a nice Cheyenne gate but it needs these along with it.
thanks

Hart_Rod 01-28-2013 09:13 AM
Re: Factory big block parts
 
Quote:
Originally Posted by nobolt (Post 5844581)
if you are scrapping the bed i would be interested in the rear tail light posts on each side of the tailgate with the trunions for wall art. lets say from the rear marker lights back. depending on price of course. i have a nice Cheyenne gate but it needs these along with it.
thanks
How about a $100 + shipping? It will probably be a while before I cut it up.

Hart_Rod 01-31-2013 11:50 AM
Re: Factory big block parts
 
Still have the BB motor mounts and the BB powersteering setup left.....

Hard_Rain420 02-01-2013 12:41 AM
Re: Factory big block parts
 
How much for the bed and tailgate? I just need it as a trailer.

Hart_Rod 02-01-2013 07:50 AM
Re: Factory big block parts
 
Quote:
Originally Posted by Hard_Rain420 (Post 5859693)
How much for the bed and tailgate? I just need it as a trailer.
Do you need the frame too?
Posted via Mobile Device

Hard_Rain420 02-01-2013 11:34 AM
Re: Factory big block parts
 
No, I have a frame with a junk bed on it.

Hart_Rod 02-01-2013 11:38 AM
Re: Factory big block parts
 
Quote:
Originally Posted by Hard_Rain420 (Post 5860289)
No, I have a frame with a junk bed on it.
I would take $350 for the complete bed. The floor and inner wheel tubs are real nice.

Hard_Rain420 02-01-2013 12:56 PM
Re: Factory big block parts
 
pm sent...

bronze 72 super 02-02-2013 02:10 AM
Re: Factory big block parts
 
Did anyone buy the in-bed spare tire mount? If not I'll take it. Thanks Mike.

Hart_Rod 02-02-2013 11:24 AM
Re: Factory big block parts
 
Quote:
Originally Posted by Hard_Rain420 (Post 5860429)
pm sent...
You need to clean out your PM mailbox.

Quote:
Originally Posted by bronze 72 super (Post 5862078)
Did anyone buy the in-bed spare tire mount? If not I'll take it. Thanks Mike.
I still have it. $65 shipped.
Posted via Mobile Device

bronze 72 super 02-02-2013 12:08 PM
Re: Factory big block parts
 
Sounds good, please send me payment information. Pay pal or money order? Thanks Mike.

Hart_Rod 02-02-2013 12:12 PM
Re: Factory big block parts
 
Quote:
Originally Posted by bronze 72 super (Post 5862576)
Sounds good, please send me payment information. Pay pal or money order? Thanks Mike.
PM sent.

Hart_Rod 02-04-2013 11:10 AM
Re: Factory big block parts
 
Quote:
Originally Posted by Hard_Rain420 (Post 5860429)
pm sent...
You need to clean your PM box out again....;)

Travisc454 02-04-2013 12:59 PM
Re: Factory big block parts
 
I need the upper bed moldings if available?

Hart_Rod 02-04-2013 02:07 PM
Re: Factory big block parts
 
Quote:
Originally Posted by Travisc454 (Post 5866913)
I need the upper bed moldings if available?
I'm pretty sure Hard_Rain420 is taking the entire bed. I'm just waiting on confirmation from him.


All times are GMT -4. The time now is 02:00 PM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com