The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 8

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - IL Parting out a 1967 C20 CST (https://67-72chevytrucks.com/vboard/showthread.php?t=563510)

F-85	01-30-2013 12:03 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by ChevyCruizer (Post 5855017)

OK, I could finally see the pictures, once I got home. I will take everything I "claimed", but you dont have the hi hump floor. So radio with knobs and brackets, both CST door emblems, and the passanger vent window. If it is easier for you I will take both vent windows. Of course we got to figure the price and shipping.

Thanks, John

How about $80 plus shipping? If thats cool, ill box them up and get you a shipping quote today. Thanks

70STOVEBOLT

01-30-2013 12:04 PM

Re: Parting out a 1967 C20 CST

I don't know where I am in line, but I will take the kickdown switch with bracket and harness if it gets to me.

Thanks,
Mark

F-85	01-30-2013 12:05 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by WETOWM (Post 5853767)

intrested in the transmission kickdown switch wiring & bracket the one mounted by the carburator

$55 shipped.

F-85	01-30-2013 12:07 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by 1old67 (Post 5853769)

How much for brake and gas pedal shipped 77039. Pending better pictures
Posted via Mobile Device
I know there not in the picture but just thought I would ask about the three screw mirrors too

Look at the pics. It looks lie the one side of the gas pedal is ripped. If you still want them you can have them for $15 shipped.

No mirrrors, but i have the arms.

F-85	01-30-2013 12:08 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by ScottG (Post 5853780)

Interested in the fan shroud and heater controls if still good to 93003.

No heater. This was an A/C truck. If the fan shroud is as nice as it looks, ill do $50 plus shipping for it.

71GeneralMotorsCorp

01-30-2013 12:09 PM

Re: Parting out a 1967 C20 CST

also want the driveshaft along with the posi rear pending price and shipping.

F-85	01-30-2013 12:16 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by too much stuff (Post 5853835)

May as well ask on the seat belts and inner and outer door handles and glovebox door also.

Sorry the seatbelts are missing the 2 center female ends. Locks do work with ign key. So for

horn button, ign switch setup with keys and door locks, lighter, 2 white hubcaps, glovebox door. $150 plus shipping.

nobolt

01-30-2013 12:18 PM

Re: Parting out a 1967 C20 CST

67 CST's get a lot of attention, lol. CST & C20....this would have been a sweet ride in its day!
its going to keep you busy!

F-85	01-30-2013 12:18 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by 71GeneralMotorsCorp (Post 5855808)

also want the driveshaft along with the posi rear pending price and shipping.

Im going off whats listed in the glovebox. I havnt checked to make sure its ratio and if its a posi. But if it is correct. Ill do $400 for the driveshaft with the complete rear, plus shipping.

F-85	01-30-2013 12:19 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by nobolt (Post 5855828)

67 CST's get a lot of attention, lol. CST & C20....this would have been a sweet ride in its day!
its going to keep you busy!

No kidding. Didnt expect this. Gad i saved it from being crushed though.

F-85	01-30-2013 12:20 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by Scott>72-GMC (Post 5853827)

If you can give a price on passenger fender shipped to iowa 50206?? Thanks
Posted via Mobile Device

Ill get it off today and check it out. Ill give you a price later after i looked it over good.

WETOWM

01-30-2013 12:22 PM

Re: Parting out a 1967 C20 CST

ok i will take the kickdown parts, switch - bracket - wire harness - please send all the misc hardware with it thanks pm me your payment info thanks ,

F-85	01-30-2013 12:22 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by 67_ShortFleet (Post 5853828)

interested in gagues. Can you post better picture?

I posted more pics last night. Ill do $75 plus shipping for the cluster with bezel.

F-85	01-30-2013 12:23 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by WETOWM (Post 5855842)

ok i will take the kickdown parts, switch - bracket - wire harness - please send all the misc hardware with it thanks pm me your payment info thanks ,

No problem. My paypal is rocketpowered64@hotmail.com

ChevyCruizer

01-30-2013 12:27 PM

Re: Parting out a 1967 C20 CST

Yes, sounds good. Just to make sure that is both vent windows and the other itmes, right? Shipping will be 89121 (Las Vegas).

Thanks, John

Quote:

Originally Posted by F-85 (Post 5855790)

How about $80 plus shipping? If thats cool, ill box them up and get you a shipping quote today. Thanks

LSUMurse

01-30-2013 12:32 PM

Re: Parting out a 1967 C20 CST

I am officially out of the running for the radiator brackets.

71GeneralMotorsCorp

01-30-2013 12:49 PM

Re: Parting out a 1967 C20 CST

Are you firm on this? cause i'm looking at like a 200-250 shipping charge to get it to me.

Could you do me a favor and make sure it works? and for certain it is a 5:14 ratio posi? Thanks for your time.

F-85	01-30-2013 12:52 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by ChevyCruizer (Post 5855858)

Yes, sounds good. Just to make sure that is both vent windows and the other itmes, right? Shipping will be 89121 (Las Vegas).

Thanks, John

Hey John

Here is what i have for you

radio with knobs and brackets
CTS badges
Pass vent window (driver side is broken off somehow) If you still want the driver side parts ill toss them in. Thanks

Josh

F-85	01-30-2013 12:55 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by 71GeneralMotorsCorp (Post 5855895)

IDk i might be able to work with you alittle more. But i found a guy just selling the locker out of it for $500 (asking) I can do $350 if that helps seal the deal. Yes i will check it all out first though.

F-85	01-30-2013 12:56 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by midniteblues (Post 5853846)

first dibs on the radiator and hold downs wing windows and put me inline on the horn button and lighter lmk

Ill do $100 for the radiator and hold downs plus shipping. Still waiting on others in front of you for the horn button and lighter.

ChevyCruizer

01-30-2013 12:59 PM

Re: Parting out a 1967 C20 CST

Yes, that is everything and yes please throw in the other (drivers) side parts.

Thanks, JOhn

Quote:

Originally Posted by F-85 (Post 5855900)

F-85	01-30-2013 01:01 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by Olive1970 (Post 5853935)

I wouldnt mind a few shots from the back and back side shots, maybe a few of the floor too if you are able to?

LMK if you want more pics then i posted. You can have the bed for $250

F-85	01-30-2013 01:02 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by ChevyCruizer (Post 5855919)

Yes, that is everything and yes please throw in the other (drivers) side parts.

Thanks, JOhn

No problem. Ill get them boxed up today and get you a shipping quote.

F-85	01-30-2013 01:08 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by MadnessBigBlock (Post 5854009)

also interested in the rear window if its soft ray tinted. Thanks, Brett.

Hey brett

I can do $140 plus shipping for the door panels, sunvisors, arm rests, booster and pro valve, and rear glass (tinted)

Other guys are in front of you for the steering wheel, and the alt bracket im gonna sell with the motor. Thanks

F-85	01-30-2013 01:11 PM

Re: Parting out a 1967 C20 CST

Quote:

Originally Posted by Scott67short (Post 5854043)

How much for the column minus the wheel to 51106? Thanks

$60 plus shipping

All times are GMT -4. The time now is 01:47 PM.

Page 3 of 8

Show 40 post(s) from this thread on one page