The 1947 - Present Chevrolet & GMC Truck Message Board Network - TX Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Page 3 of 3

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - TX Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets (https://67-72chevytrucks.com/vboard/showthread.php?t=570979)

WIDESIDE72

03-21-2013 10:48 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by mvesr (Post 5962531)

Do you have a crank pulley for the power steering part number 3751232

Thanks-Mika

sorry, not that I know of. I have a ple of pulleys and if I get time I will look through them, though.

WIDESIDE72

03-23-2013 01:39 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Stoplight switch, throttle bracket, rear light harness and gun rack shipped USPS
Posted via Mobile Device

WIDESIDE72

03-23-2013 11:33 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

2 Attachment(s)

Quote:

Originally Posted by jjzepplin (Post 5952271)

Do you have a rag joint? Can't seem to find one... Even on this forum.

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

WIDESIDE72

03-23-2013 11:36 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

1 Attachment(s)

Quote:

Originally Posted by Sloan66 (Post 5954312)

By chance do you have the clamp that holds the power steering lines t the frame? If so interested. Thx shipping to 37130

I pulled the frame mounted power steering line retaining clamp nut and bolt.

$10 shipped

HotRod C/10

03-23-2013 11:36 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

try tinypic.com

WIDESIDE72

03-23-2013 11:42 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by pbjsammich (Post 5954805)

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

I know I had a good ac control at one time, but I think its in a trialer load of stuff I was going to take to the New Braunfels swap meet next month and I didnt have time to dig for it this weekend. I will try next THurs or Fri if you can wait.

WIDESIDE72

03-24-2013 12:08 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Could I please have the title edited to read "core support, glove box door, courtesy harness, gauge cluster, rad mounts'"?

bertvert72

03-24-2013 12:50 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

WIDESIDE72

03-24-2013 01:13 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by bertvert72 (Post 5967002)

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

I still have it. PM SENT

bertvert72

03-24-2013 01:42 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

i'll take it . how much? first time buying on here.do you take paypal

WIDESIDE72

03-24-2013 02:32 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by bertvert72 (Post 5967065)

i'll take it . how much? first time buying on here.do you take paypal

Check your mailbox for a pm with payment info
Posted via Mobile Device

jjzepplin

03-24-2013 06:26 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by WIDESIDE72 (Post 5966856)

Pretty nice rag joint on the truck. The box and pump hadn't leaked and ruined it yet. These are like hen's teeth. $50 shipped, otherwise I will keep it for myself.

I have one on it's way so I will wait on this one. If it turns out to be the wrong one ( again ) I will hit you up.

WIDESIDE72

03-24-2013 01:54 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Feel free to make offers

WIDESIDE72

03-26-2013 07:19 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by bertvert72 (Post 5967002)

i WOULD BE INTERESTED IN THE ASHTRAY AND BRACKET IF YOU STILL HAVE IT

Ashtray and bracket sold to Bertvert.

I also have a silver 72 ashtray and bracket for sale. Same deal, $20 shipped. Photos this weekend.
Posted via Mobile Device

WIDESIDE72

03-28-2013 07:39 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Bump
Posted via Mobile Device

WIDESIDE72

03-31-2013 09:25 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Entertaining all offers
Posted via Mobile Device

deuceman32

04-25-2013 03:47 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

If you still have the SWP power steering pump, pulley and brackets set at $60 shipped (to 14305) I will take them. Thanks.

hotrodtodd

04-25-2013 04:54 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

didnt see a price on brake booster brackets and rod be interested pending price thanks

WIDESIDE72

04-25-2013 07:09 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by hotrodtodd (Post 6034323)

didnt see a price on brake booster brackets and rod be interested pending price thanks

$45 shipped
Posted via Mobile Device

WIDESIDE72

05-02-2013 08:56 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by WIDESIDE72 (Post 5957244)

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

I went to a swap meet a few weeks ago and pulled everything out but didn't come across the Ac control. I must have sold it. New price on gauge clusters, $40 shipped. I have two ith gauges and one with idiot lights
Posted via Mobile Device

WIDESIDE72

05-02-2013 08:57 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by deuceman32 (Post 6034194)

If you still have the SWP power steering pump, pulley and brackets set at $60 shipped (to 14305) I will take them. Thanks.

Sorry sold
Posted via Mobile Device

WIDESIDE72

07-19-2013 12:41 AM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

ttt

Jake1971

11-18-2013 10:44 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

:truck: i am interested in the radiator support and possibly other parts if you still have them. i can pick up local.

WIDESIDE72

11-22-2013 03:18 PM

Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets

Quote:

Originally Posted by WIDESIDE72 (Post 5951920)

Very nice, solid core support, no evidence of ever being wrecked, some pitting on bottom passenger side $150, pickup in Austin TX area or possibly DFW area w/ some negotiating.

Sold to Jake1971

All times are GMT -4. The time now is 01:25 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page