The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)

- - 57 truck brake issue (https://67-72chevytrucks.com/vboard/showthread.php?t=647008)

Re: 57 truck brake issue

Other thing I notice is before the new master after I drove her for a bit the front brakes would tighten up real bad now with the new master they stay the same crossing my fingers all is fixed

Re: 57 truck brake issue

Quote:

Originally Posted by dwcsr (Post 7296532)

Some of these are step bore masters so you don't depress them all the way while bench bleeding. Push in a half inch at a time other wise you damage the rear cup. get hold of the tool to keep the prop valve centered while you bleed. most after market valves use a screw in tool that goes in where the warning light switch is.

http://www.ebay.com/itm/Combination-...-/111607889429

Wow, no returns and 5 days handling after cleared payment? I was about to BIN on 3 of these when I noticed these crappy terms. C-ya, wouldn't wanna be ya goes to them, Western Chassis, whoever they are.