![]() |
Re: The '67 Burb Build Thread
5 Attachment(s)
:metal:and my new SD wheel tubs, still gotta paint them and under coat them but here they are, and just held in place with a couple sheet metal screws for now.
Attachment 532902 Attachment 532903 Attachment 532904 Attachment 532905 Attachment 532906 |
Re: The '67 Burb Build Thread
coming along nicely...you getting the bag stuff ready?
i been meaning to ask you...what did you do to cut your floor and stock tubs out? i been working on mine all week (scattered about) and i have been grinding the head of the bolts off and punching them through with a hammer and screwdriver...got a few more to go still. and i havent tried cutting the tubs out...what did you use to cut them out? |
Re: The '67 Burb Build Thread
thanks, i try lol. no not yet, no money for that but soon hopefully lol. and i used a combination of things over time as i was removing the floor and wheel tubs. i used a grinder, a saws-all, an air cutter, and a couple of hand tools.
|
Re: The '67 Burb Build Thread
2 Attachment(s)
a few more shots, now with the rear wheels all black. will get some more pics tomorrow of the tubs and rear frame painted up.
edit: dont mind the illegal parking lol, it was only for a couple minutes and in front of my house. Attachment 533539 Attachment 533540 |
Re: The '67 Burb Build Thread
3 Attachment(s)
frame and wheel tubs painted black and undercoated
Attachment 534123 Attachment 534124 Attachment 534125 |
Re: The '67 Burb Build Thread
3 Attachment(s)
here's some Cali black and yellow plates im working on that i will be using one way or another lol. one was pretty horrible(the top half all bent up and stuff) when i got them, the other wasnt to bad. didnt take before and during pics but here they are in primer, they still need some more sanding to finish smoothing out and then i can start painting them the colors they are supposed to be. they are not going to be perfect but good enough for me lol
Attachment 536391 Attachment 536392 Attachment 536393. |
Re: The '67 Burb Build Thread
How did the plates turn out?
|
Re: The '67 Burb Build Thread
never finished them, damn satin black spray paint wrinkled up on them lol. so they have been sitting in a box in my room for a while. eventually i'll pull them back out and try redoing them again.
|
Re: The '67 Burb Build Thread
Bring them to the show. You will see the plate resto C/10King's wife does.:metal:
|
Re: The '67 Burb Build Thread
4 Attachment(s)
not much of an update guys but heres a few things that have been done
some bucket seats out of a 2006 suzuki forenza i put in Attachment 606444 some stainless steel shorty haeders i installed Attachment 606445 not the newest and most current pics but it doesnt look any different Attachment 606446 Attachment 606447 |
Re: The '67 Burb Build Thread
5 Attachment(s)
decided not to use these
|
Re: The '67 Burb Build Thread
3 Attachment(s)
decided not to use these
|
Re: The '67 Burb Build Thread
also got some exhaust work done but no pics of that, its 2.5" true duals all the way out the back with flowmasters that were already on it.
oh! and i also tunneled the floor for rear driveshaft clearence, and im working on a bolt in rear bag set up for between the frame rails just behind the back seat |
Re: The '67 Burb Build Thread
Its coming along man ill subscribe to your thread i like what your doin already.
|
Re: The '67 Burb Build Thread
man its super low for a static drop. whats the bag setup gonna be? (wondering if it would get any lower lol)
|
Re: The '67 Burb Build Thread
Quote:
|
Re: The '67 Burb Build Thread
2 Attachment(s)
Quote:
Attachment 610212 Attachment 610213 |
Re: The '67 Burb Build Thread
Really looking good i really like the control arms
|
Re: The '67 Burb Build Thread
haha thanks, yah they are beefy as hell to . done up by a buddy/lowrider guy built for hoping so they should never bend. the only thing i had him do that was a little to much is stretching them an 1" 3/8's. should have only went 1" instead as i have some positive camber at that front ride height lol. and thats with almost no shims.
|
Re: The '67 Burb Build Thread
5 Attachment(s)
Attachment 657577
aired up next to my buddys aired out burb Attachment 657578 Attachment 657579 aired up Attachment 657580 another pic of rear bag setup, still needs some more bracing to fully eliminate the trailing arm twisting Attachment 657581 |
Re: The '67 Burb Build Thread
5 Attachment(s)
aired out laying body
Attachment 657582 aired out laying body Attachment 657583 aired up Attachment 657584 sitting low Attachment 657585 sitting low Attachment 657586 |
Re: The '67 Burb Build Thread
1 Attachment(s)
sitting low
Attachment 657587 |
Re: The '67 Burb Build Thread
3 Attachment(s)
|
Re: The '67 Burb Build Thread
hey, im really diggin that rear setup. can you post some pics of rear setup with it laid out?
|
Re: The '67 Burb Build Thread
that is laid out in the rear lol, it lays body. what kind of other pics you want, i can try and go take a couple more?
|
Re: The '67 Burb Build Thread
lol, i meant the actual suspension, inside the truck. flip the gate down with it laid out and snap a pic if you can.
|
Re: The '67 Burb Build Thread
for sure. be right back.....
|
Re: The '67 Burb Build Thread
3 Attachment(s)
here you go bro, its the best i could get. hope they are good enough...
Attachment 661566 Attachment 661567 Attachment 661568 |
Re: The '67 Burb Build Thread
perfect. i just wanted to see where the crossmembers were in relation to the driveshaft when its aired out. i really like that setup, any thought of makin them to sell? ;)
have you decided how your gonna bag the front? |
Re: The '67 Burb Build Thread
Quote:
for the front, well i put the stock upper a arms back on in the front because of having to much positive camber, gonna shorten and cup the lowers and add 3" drop spindles with bags and that should take care of the front for a while. |
Re: The '67 Burb Build Thread
3 Attachment(s)
painted a few more things for my engine im building..... painted with bright red brake caliper paint
Attachment 671609 Attachment 671610 Attachment 671611 |
Re: The '67 Burb Build Thread
5 Attachment(s)
some cupped lower a arms im building.... welded with an arc welder by me, and not the greatest and best looking but they will work. also will probably end up shortening them 1" to help with negative camber.
edit: dont mind the obligitory frame in the background lol.... Attachment 671612 Attachment 671613 Attachment 671614 Attachment 671615 Attachment 671616 |
Re: The '67 Burb Build Thread
5 Attachment(s)
|
Re: The '67 Burb Build Thread
1 Attachment(s)
|
Re: The '67 Burb Build Thread
came out great man. good idea on the water drain!
Posted via Mobile Device |
Re: The '67 Burb Build Thread
hey guy if you veiw this thread or you are project 67 sub HAVE A MERRY CHRISTMAS
|
Re: The '67 Burb Build Thread
haha you to bro
|
Re: The '67 Burb Build Thread
so you finish up the other side yet?
|
Re: The '67 Burb Build Thread
no, somtime within the next couple of days or so, doing the work at a buddies house as that is where the other one is at as well as all the tools to do it.
|
Re: The '67 Burb Build Thread
Awesome truck. You have great skills. You have transformed your burb. Good job. It's just awesome.
Posted via Mobile Device |
All times are GMT -4. The time now is 10:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com