|
Re: Look what I got back yesterday!
unfortunately it'll be a little while before I get to race it but I can't wait I'm going to try to get it in real soon!
|
Re: Look what I got back yesterday!
That is a great looking engine.
|
Re: Look what I got back yesterday!
sounds like sweet combo. I'm partial to the valve covers.... :)
|
Re: Look what I got back yesterday!
Awesome! :metal:
|
Re: Look what I got back yesterday!
Looking good! Can't wait to see those e.t.slips! How much spray can you run with your NOS system?
tommy g |
Re: Look what I got back yesterday!
Very Nice!!
|
Re: drag truck progress
Looks Great! What weight are you hoping to get the truck down to? Are you going to run a vacuum pump?
tg |
Re: Look what I got back yesterday!
Tommy G
It starts at 200 and goes to 600. I'll probably only run about 300! |
Re: drag truck progress
Tg
I'm hoping to get it down to around 2800 with my 200! I have my fingers crossed! I do have a GZ Motorsports vacuum pump. |
Re: drag truck progress
Is the cage from S&W? If you have more pics of the front end, please post them or e-mail me direct.
Thanks, Looking Good! tg |
Re: drag truck progress
4 Attachment(s)
the front end is a fatman bolt in setup I don't have many pictures of it! The cage was custom done it has a funny car cage in it! I'll try to post a couple pictures of the cage!
|
Re: drag truck progress
Did you install the front suspension?? Do you like it?? Is it worth the money in your opinion??
|
Re: drag truck progress
It was on the truck when I got it but I have heard nothing but good things about the setup!
|
Re: Look what I got back yesterday!
Quote:
Looks great :burnout: |
Re: Look what I got back yesterday!
:metal: Big Motor....!
|
Re: Look what I got back yesterday!
:four: That thing makes me happy in the pants.
|
Re: Look what I got back yesterday!
As they say, no replacement for displacement!!! Looks great!! Big Dollar Big Block, money very well spent!
|
Re: Look what I got back yesterday!
Going fast just sittin' there! Nice!
|
Re: Look what I got back yesterday!
Kevin, lookin' AWESOME!!! Let me know when you're going to the track. It would be worth the 250 mile ride to watch. :metal: :burnout:
|
Re: Look what I got back yesterday!
I'll keep you guys and gals posted! I'll probably just run it on the motor first to get the bugs out. I will probably have to have wheelie bars! The ones I want are 629.00!
|
Re: Look what I got back yesterday!
:phat: I Likey !!!
|
Re: drag truck progress
Digging this up for some more info on the front end, I've been thinking about the same setup for my truck. Was wondering if the stance remained the same, as it width wise and how much it lowered the truck, and if you could keep the 5x5 bolt pattern?
I know I could just call Fat Man, or check out there web site, but I also wanted to check on some more progress pics of djracer's truck, been following along and can't wait to see it finished.;) |
Re: drag truck progress
2 Attachment(s)
My truck is not 5 on 5 anymore and I think the track width might be a little more narrow than stock. You can get it with or without drop spindles. I think jim meyer makes a similar setup that uses caprice stuff that is 5 on 5!
I went and checked on it tonight they are starting the aluminum work in the bed. I tried a set of hedders that I think will work. I checked my driveshaft and I think it will work also but it needs a different yoke. The one I have is for a turbo 400! I also am going to have to move some tabs and the tranny mount brackets! Kevin |
Re: drag truck progress
Thanks for the info, keep us posted.
|
Re: drag truck progress
Is it just me, or does a Dominator on top of a big block with a single plane make anyone else wet their skibbys?:o
DJ, I would almost be willing to drive to Bama just to see that bad boy make a few passes and hear it roar.:burnout: :bo2: :nx: :jdp: :clap: |
Re: drag truck progress
Hey when I get it going I'll keep all you posted on when and where I be running and I'd love for yall to come! I hope to promote a truck drag and show one day after I finish my truck! I think that would be awesome!
Kevin |
Re: drag truck progress
You'll need to wear a prophylactic when you fire that monster up. lol
|
Re: drag truck progress
probably not till I turn loose of the trans brake button!
|
Re: drag truck progress
What's up big man?! Truck looks great! I finally got my bell and got the truck going, but I had to take the driveshaft out and have it balanced. Should have it back early next week. Maybe I'll drop by your house in it and give ya a peek. Later, Neil.
|
Re: drag truck progress
Quote:
Awesome!! |
Re: drag truck progress
Did you take your driveshaft to Catfish at capital volvo? I need to go see him my aluminum shaft came with a turbo 400 yoke! I have a glide!
Kevin Quote:
|
Re: drag truck progress
2 Attachment(s)
For those of you who haven't seen my motor here is a Pic or two!
|
Re: Look what I got back yesterday!
awsome looking motor.can't wait see the complete truck .
|
Re: Look what I got back yesterday!
Engine color! I like it BLACK.
Later Willis |
Re: Look what I got back yesterday!
I agree, that is one mean looking motor. You have to love them big blocks. Also like the Chevy logo on the covers.:cool:
|
Re: Look what I got back yesterday!
Welcome to the board Mike! You should post some pics of your project!
Kevin Let me know if you need help posting them! Quote:
|
Re: drag truck progress
4 Attachment(s)
More pics of progress
|
Re: drag truck progress
4 Attachment(s)
A few more
|
Re: drag truck progress
love it man....excellent work...
|
Re: drag truck progress
its coming along slow but sure!
|
| All times are GMT -4. The time now is 05:33 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com