Re: Digging Holes For Shop Today!
Glad you did'nt ask to use my saw! Hey...where's my saw?
Cant wait to see it. |
Re: Digging Holes For Shop Today!
What your doing should be fine. How long did your concrete guy tell you to keep vehicles off of it? Make sure it is fully cured before putting a lot of weight on it.
|
Re: Digging Holes For Shop Today!
2 Attachment(s)
Quote:
Quote:
|
Re: Digging Holes For Shop Today!
I agree with you, I'd stay off of it the whole month untill it was completely cured and sealed. That sucks about the wood rot in your house garage, some how I got pushed in to doing woodrot repair for a few months for this guy I used to sub work off of. Once you start cutting out you seem to find more. Good luck with that.
|
Re: Digging Holes For Shop Today!
Anywhere there is concrete should be pressure treated lumber. Hard to tell from your pictures where all the concrete is. Have fun. :lol: I was on a job of a 12 year old house which was rotted top to bottom. This was a 3 story house. Ripped all the siding off the back, and lightwell and all the stucco off the front. I think we replaced about 50% of the framing also.
|
Re: Digging Holes For Shop Today!
I like the shop . I hope you went ahead and put cureing compound on the floor after they finished power trouling the floor . I do all of our homes we build put on the carport floor as soon as its sets . it will keep the concrete looking like it was just poured and any oil or what ever gets on it wont soak in the concrete . I get mine from the concrete plant . keep up the post :cong:
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
Not a whole bunch has happened as of late , but I parked a couple of cars inside tonite . WooHoo ! I got it sealed last weekend and I used this
http://www.miraclecoverinc.com/ I know it won't be long and it'll get tested , oil spill who knows what else . Heck thats what the shop is for . here are some pics The truck is still outside for now seems I have some oil issues to look at someday , for now it'll leak outside :lol: I am not sure if the Amazon leaks oil but I wanted to be safe (the cardboard) |
Re: Digging Holes For Shop Today!
Makes my new 18x28 look tiny. Nice looking shop.
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
Got trench dug , hand dug under sidewalk , in process of adding power now.
got some headway tonite , helps to have a buddy who is an electrician ! 1st pic of my oil leaker in the shop:lol: Add more pics soon . |
Re: Digging Holes For Shop Today!
So where is the toilet for you know what, and wash basin for your greasy hands.. :confused: :lol:
|
Re: Digging Holes For Shop Today!
Quote:
The sink would be an easy add but not sure where to put it ? If I added a toilet it would go upstairs , but as of this time I have no upstairs :lol: Its hard enough to determine where to put my outlets ! |
Re: Digging Holes For Shop Today!
4 Attachment(s)
More pics .........
filled in some more of the drain trench tonite, and worked on the electrical some more tonite it was almost 50 last night it was almost 40 Brrrrr ! |
Re: Digging Holes For Shop Today!
3 Attachment(s)
Spent about 8 hours today hanging lights (not a fan of high places), getting ready for when my electrician comes back on Monday then Tuesday the tractor guy is coming back for more trenches . No time to chop wood :waah:
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
Lights ! Check em out .:5150: Had to use the new smiley!
|
Re: Digging Holes For Shop Today!
:metal: :5150: :metal:
|
Re: Digging Holes For Shop Today!
Inspecter for electrical due in today (2nd time) wish me luck !
|
Re: Digging Holes For Shop Today!
:5150: That rocks!! :metal:
|
Re: Digging Holes For Shop Today!
Good luck!!:D
|
Re: Digging Holes For Shop Today!
1 Attachment(s)
A lil work here and there mostly making messes now, did some tractor work
did o.k. but it takes awhile to get used to grading . Heres a pic Oh it passed ! Woo Hoo ! |
Re: Digging Holes For Shop Today!
Congrats On the pass. It's always good toget thru those inspections.
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
Starting to add color to the shop ! Will need to change color on the gutters
also.(what do ya think?) Had my helper today cleaning up some of our mess we made putting in the slotcar track in the loft. Things are coming along SLOW but sure . |
Re: Digging Holes For Shop Today!
looking good man. That track is cool! I want one of those:D
|
Re: Digging Holes For Shop Today!
You're a lucky man. Thats a great looking shop.
|
Re: Digging Holes For Shop Today!
Nice shop. Now let's get some paint on those 'guardrails' ;)
|
Re: Digging Holes For Shop Today!
Thanks for the kind words , the track is a hoot ! But needs some TLC its used and has some issues on power delivery (resistance ?) I need to take it apart piece by piece and clean each track section . Just takes time :waah:
Guard rails :lol: must be refering to my cardboard boxes ! TEMP ! |
Re: Digging Holes For Shop Today!
Quote:
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
Fast forward over a year and its still not done :lol:
Now I am trying to figure how to frame up an inside wall(seems stupid since I have walls already) so I can insulate. I did not want to have any fiberglass touching metal so I added 1/2" styrofoam to the girts and then I'll frame up and add insulation if I don't start another project in between. Check out the pictures, ideas welcome |
Re: Digging Holes For Shop Today!
my only issue is you built it in the wrong spot. it should be 1547 miles to the south east. LOL
have you thought about adding more windows? I think it would save on electricity. |
Re: Digging Holes For Shop Today!
3 Attachment(s)
Quote:
Maybe someday on the windows for now its not in the cards. I did pick up a new sign for the shop today. Also grabbed a roll up man door that I got free from work. My lucky day! |
Re: Digging Holes For Shop Today!
3 Attachment(s)
I have done a little more on the back wall, just been a slacker about posting anything.
|
Re: Digging Holes For Shop Today!
Shop looks great, Eric
|
Re: Digging Holes For Shop Today!
I just wish i had the land to have a shop too.. Looks great!
|
Re: Digging Holes For Shop Today!
4 Attachment(s)
Thanks for the reply's I really like my shop I just wish I had the money to finish it before I packed it full of "stuff" and dug into the projects.
Sure makes it hard to do upgrades in the shop while stumbling over things. As you can see in my latest change. I am getting too old to work in the cold. My goal is to have the 2 bays sealed off and insulated to give my little G73 heater half a chance. Made slider doors or I should say I hired a guy to help me.(I helped him:lol:) I'm a do it yourselfer but for speeds sake it was nice to just have it done. |
Re: Digging Holes For Shop Today!
Very nice!
|
Re: Digging Holes For Shop Today!
Great job on the shop. Thank you for sharing it in the forum.
|
Re: Digging Holes For Shop Today!
3 Attachment(s)
A little effort on the projects then a little effort on the shop. Back and forth,
back and forth. I suppose as long as I'm making steps in the right direction thats the important thing. Some sheetrock work today. Used the engine hoist as a helper as well as some 2by's here and there. Had a piece of sheetrock over my head and could not reach my screw gun. Cell phone came in handy. "Honey can you come out in the shop?";) |
Re: Digging Holes For Shop Today!
3 Attachment(s)
Small bits of progress here and there. Already the doors and sheetrock work have made it heat faster and I have yet to close the doors and seal up many gaps. Pretty happy so far.
The one slider door was pretty warped so I dug up some 'stuff' I had laying around and made a bump out roller to push the door away from the sheetrock. Added hardi board for the bottom 1 foot of my wall to protect against wet cars draining on my shop floor. (Seattle area) Will cover that with tile. |
Re: Digging Holes For Shop Today!
Well those things aren't really overrated as they look. The shop can be the ones just to control them.
|
Re: Digging Holes For Shop Today!
Quote:
Brad, I still have a fair-sized stack of Milgard vinyl sound-abatement windows (new and never installed) that I'll be getting gone ASAP. If you plan on someday installing more windows, you are welcome to any you think you can use. PM me if you are interested. Keep up the good work! |
Re: Digging Holes For Shop Today!
2 Attachment(s)
Shop progress has been slow. Real slow. So many half done projects it amazes even me. ;)
Took out some retirment money(whos going to retire anyway LOL) and poured a slab out front of one bay big enough for jr. to be able to play some BB with his friends. Also did a sidewalk from the house to the shop. (never mind the mess, just finished pour) Now I have some very torn up yard to deal with, but no more muddy shoes walking back and forth from the shop in the long rainy fall/winter/springs we have. :lol: |
All times are GMT -4. The time now is 04:10 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com